Swap meet...

[Work Saw Collector]

I need an exhaust deflector for a Homelite Zip. All I've got to trade are some WildThing parts :hmm3grin2orange: but do have some change in my coin jar, too.

PM and pics sent.

 

[Mastermind]

This is a picture of the coil I need. It's for a John Deere 3816. It's a rebadged Homelite 3816. Not sure what else may fit. Any help here is most appreciated.

 

[roncoinc]

I have seen that coil before,i just went down and gave a quick look but didnt see it.
maybe in the pile UNDER the shop,will look there when i get a chance tomorrow.
not a rare one,i seen it on many saws.

 

[Mastermind]

I have seen that coil before,i just went down and gave a quick look but didnt see it.
maybe in the pile UNDER the shop,will look there when i get a chance tomorrow.
not a rare one,i seen it on many saws.

Thanks for looking for me Ron. The saw belongs to a retired Marine. He started his career in Vietnam and ended it as a recruiter. The man is a really great guy. I feel honored to have him for a neighbor and a friend.

 

[Warped5]

This is a picture of the coil I need. It's for a John Deere 3816. It's a rebadged Homelite 3816. Not sure what else may fit. Any help here is most appreciated.

Wait a sec here little fellers ..... when did Homelite rebadge for Deere? I thought Deere only dealt with Echo and Efco ... :msp_confused:

 

[DSS]

That coil looks pretty generic to me too.

I'm gonna look in my "stuff'' pile.

 

[DSS]

Wait a sec here little fellers ..... when did Homelite rebadge for Deere? I thought Deere only dealt with Echo and Efco ... :msp_confused:

and Remington....

 

[SawGarage]

"manufactured for Deere & company"


see it on a TON of homelites, actually...

 

[Mastermind]

"manufactured for Deere & company"


see it on a TON of homelites, actually...

Then I bet you got this here coil. :msp_sneaky:

 

[Modifiedmark]

This is a picture of the coil I need. It's for a John Deere 3816. It's a rebadged Homelite 3816. Not sure what else may fit. Any help here is most appreciated.

Randy, I have this one, its off a Homelite 23AV. It appears it dont have the external ground wire but I bet it will work.

Let me know if you want me to send it.

 

[Mastermind]

Randy, I have this one, its off a Homelite 23AV. It appears it dont have the external ground wire but I bet it will work.

Let me know if you want me to send it.

PM sent!!!

 

[Modifiedmark]

I need a clutch drum/sprocket/bearing for a Homelite 2.3 AV - cheap little plastic Homelite I know but I want to make it workable before I pass it along.

I have mostly McCulloch parts to trade, a few other odds & ends, or cash if that works.

Alternatively, let me know where to look for a new one and I'll go but it.

Thanks,

Mark

Mark, let me know if you found one yet. I got this one here with your name on it if you want it.

 

[SawGarage]

Then I bet you got this here coil. :msp_sneaky:

Must I go back and edit my post to sa "BEFORE"... or saw it BEFORE...lol

 

[SugCutter]

Stihl 021-025 Clutch Cover Needed

Found the bar and chain; Still need the clutch cover. Anyone have one collecting dust?
Sug

Need a 14 or 16" 3005 3/8 picco bar and chain for an 021 project.
Also need a clutch cover for the 021.
Have a 18" Black Homelite (small mount husky, I think) and oregon safety chain to swap.
Also have a Husqvarna 42 cylinder (no piston) and a bucket of Husqvarna 36/41 parts.
Thanks,
Sug

 

[hoss]

I sure could use some ignition parts for a shindaiwa 680. Great lookin saw, but no spark. Got lots to trade or greenbacks. Thanks

 

[thomas1]

Partner 500

Missing the springs for the starter pawls? I assume the rubber band that was around them to make them retract wasn't factory.

Two bolts missing from the recoil cover. P/C looks new, machine marks still on the piston.

I don't think it saw much use, they probably didn't think it cut well. I can't imagine what the problem could've been.

I would prefer to sell quickly, I am going out of town Saturday and would like to send it out before then.

 

[Modifiedmark]

Found the bar and chain; Still need the clutch cover. Anyone have one collecting dust?
Sug

I'll look to be sure, but I think I have a cover for one off a 025.

You got a good cover for the 36-41 there?

You can still have this one either way if I have it.

 

[jbighump]

lookin for a 029/290 project saw must be mostly complete have a 031 with great compression and some mula to trade

 

[wigglesworth]

Thought id see if there was any interest before i eBayed it. Power Products Ah-58 motor. 95cc. Good comp, P&C look good. Fires on a prime. Up for ?? or $$

 

[DSS]

Partner 500

Missing the springs for the starter pawls? I assume the rubber band that was around them to make them retract wasn't factory.

Two bolts missing from the recoil cover. P/C looks new, machine marks still on the piston.

I don't think it saw much use, they probably didn't think it cut well. I can't imagine what the problem could've been.

I would prefer to sell quickly, I am going out of town Saturday and would like to send it out before then.

pm sent