Swap meet...

[sefh3]

Stihl looking for a chain brake for a MS290. Also needing a chain brake and wrap handle for an 046.

 

[jimbo1490]

Jacob,

I just PM'ed you about a 420 I just got in. The story of how I got it is good for a laugh so here goes...

<SNIP>​

Did I do good, Pa? (pics tomorrow, it's very late:msp_mellow

Jimbo

I know the rules; no pics, no happen. So here they are:

View attachment 212788

From front to back we have the TS 400 runner and the TS420 runner (Jacob J's saw),
The two 400's with good compression and bottoms, the two 400's that are worn out and the 420 basket case is of course in the basket in back.

Jimbo

 

[komatsuvarna]

Hello my "very nice" friends
Im looking for a 066 carb box
031 bar stud
028 3/8 sprocket (B&C as well )
poulan pro 42cc
3/8 sprocket (B&C for this one)
PM me and let me know :msp_thumbup:

I think they are 2 different carb housings,,,, maybe even 3, Im not exactly sure on how many, but I know they're atleast 2 different ones. Gotta get the one that fits the tank and air filter set up/air filter covers. Its kinda . You know if you need the earlier model or the later model one?

 

[ChainsawmanXX]

I think they are 2 different carb housings,,,, maybe even 3, Im not exactly sure on how many, but I know they're atleast 2 different ones. Gotta get the one that fits the tank and air filter set up/air filter covers. Its kinda . You know if you need the earlier model or the later model one?

Earlier model im thinking? Poly flywheel and curved cylinder cover. I know 064 carb box will not fit.

Sent from my LS670 using Tapatalk

 

[thomas1]

I know the rules; no pics, no happen. So here they are:

View attachment 212788

From front to back we have the TS 400 runner and the TS420 runner (Jacob J's saw),
The two 400's with good compression and bottoms, the two 400's that are worn out and the 420 basket case is of course in the basket in back.

Jimbo

And I was happy to get 2 ts350's for $25.

 

[atpchas]

I'm looking for an 024 parts saw. I have a good bottom and top end but need much/most of the stuff that goes around it. Mostly green to trade.

 

[flyboy553]

051AV Electronic Crank Seals Wanted

Looking for both seals for this machine. It belongs to the local Stihl dealer who can't seem to find these seals. I told him I would try AS members to see if anyone had them. I am trying to help him out.

Ted

 

[nstueve]

bar stud

hey guys,
found my 024avs bar/sprocket cover (thanks for the trade Jimbo!)

Now I'm on the hunt for a threaded bar stud... I am removing the bar stud circled in red and am in need of another stud like circled in green! Same 024 super saw... so I think 024,026,028 studs will work???
$$$ and 009-012 parts to trade!

 

[jerrycmorrow]

hey guys,
found my 024avs bar/sprocket cover (thanks for the trade Jimbo!)

Now I'm on the hunt for a threaded bar stud... I am removing the bar stud circled in red and am in need of another stud like circled in green! Same 024 super saw... so I think 024,026,028 studs will work???
$$$ and 009-012 parts to trade!

have you tried your local bolt and screw supply house?

 

[nstueve]

have you tried your local bolt and screw supply house?

Do I just get a generic post and cut it down?

 

[jerrycmorrow]

Do I just get a generic post and cut it down?

no. i took one out of one of my saws and showed it to them. they matched it. don't think generic post would work unless it had shoulders on it. typically threads are different on both ends too.

 

[nstueve]

no. i took one out of one of my saws and showed it to them. they matched it. don't think generic post would work unless it had shoulders on it. typically threads are different on both ends too.

The only places i have locally would be my hard ware store (very small and limited items)... menards, home depot... I figured it was a common enough stihl part that it might be easier to ask for one here and paypal someone some cash. If anyone has the part number i'd be willing to run over to the local stihl dealer and see if they have a spare or can order one!

 

[Duke Thieroff]

Chris- it would help if we knew what you were looking for or had in mind.



Terry- I believe I have a good, complete crankcase I can send your way. Do you need a crank as well?

Jacob,

Really not sure what im looking for, other than 70cc and up running saws or minor projects in any colors in trade for my PM850. Sometimes I'll offer something up for trade to see what people have to offer and if anything that I have never thought about grabs my interest.




Chris

 

[GeeVee]

i will remember that,, guess i need to come by myself to barter on you 603,, but she does have a lot better cleavage then i do:biggrin::biggrin::biggrin:

Front or back?

 

[muddawg]

Front or back?

doesnt matter either way,....HE AINT GETTIN NOTHIN' !

 

[Saw Dr.]

Looking for both seals for this machine. It belongs to the local Stihl dealer who can't seem to find these seals. I told him I would try AS members to see if anyone had them. I am trying to help him out.

Ted

I have a BUNCH of NOS stuff from that vintage. If you can come up with a P/N, I can probably help. I'm too lazy to do it myself...

 

[glock37]

Ebay has tons of seals up for auction or try the sponsors too

Looking for both seals for this machine. It belongs to the local Stihl dealer who can't seem to find these seals. I told him I would try AS members to see if anyone had them. I am trying to help him out.

Ted

 

[Saw Dr.]

I was posting from my phone, hosed it up, and ended up posting this in the Ebay/CL thread...

I need a good 3400/3700/4000 clutch for a buddy. He's willing to pay. Says it is NLA, so he called me. Go figure.

 

[wigglesworth]

Lookin for a "nice" set of 660 cases. Have a boat load to trade.

 

[Bowtie]

Looking for a non-decomp 066 cylinder and crank. Hell I need all kindsa 066 parts.