Eccentric
Mister Wizard
455 Rancher?
Swap meet...
- Thread starter Four Paws
- Start date
Help Support Arborist Forum:
455 Rancher?
Glad you said that! I am looking for a builder 455.Anyone have one for a fair price? My goofy Nephew thinks he needs one? LOL Got a good running Stihl 012 for trade?
I have a Husqvarna 55, after a good clean up, minor mending, a new chain and decent used 16" bar. noodled well about 15 minutes for me w/ no problems. Looks fair to decent, I paid $125 before the work. Have a not very old ms170 and an older unit that works ok. Have an 041av electronic and several extra parts. I put a used ignition system on it and it runs on prime then dies, good compression,looks well used, but not busted up other then the lower hndlbar av mount buffer is broke. Not sure if the oiler is pumping. This saw revved up well and idled several minutes when I got it then died and had no spark, I robbed the carb and put on a differant 1 later that sat quite a while and replaced the electronics . It may need timed also, but it may be close enough, not sure. Just have to many things to fix and could use more garage space. Have a new old stock 041 Tecomac top end too, Homelite generator frame w/ gas tank and nice 11 hp wiscnsin robin engine, a well used Honda 4000 w generator that needs motor work, old 80cc McCulloch, Blue Homelites, C-5 & c-51 s need rebuilt,and older xl 12 that runs on prime, needs a few parts. Also have some extra chain and other parts, mostly Stihl I could use for trading.
I could use bigger chainsaw powerheads like a Makita 6401 or bigger Stihls with a chain brake that are mostly complete, needing little repairs or ready to roll. Also need a good 2 stage splitter pump and mounting bracket to a 6.5 Honda clone motor. Prefer 13 gpm. A biggie I need is a 2.6 4 cyl Isuzu running motor,1989-92. I could also use a good B Farmall tractor. Have a 1959 Dodge D500 might trade off. Prefer to trade within reasonable driving distance, but not neccessarily.
I could use bigger chainsaw powerheads like a Makita 6401 or bigger Stihls with a chain brake that are mostly complete, needing little repairs or ready to roll. Also need a good 2 stage splitter pump and mounting bracket to a 6.5 Honda clone motor. Prefer 13 gpm. A biggie I need is a 2.6 4 cyl Isuzu running motor,1989-92. I could also use a good B Farmall tractor. Have a 1959 Dodge D500 might trade off. Prefer to trade within reasonable driving distance, but not neccessarily.
timberdollars
ArboristSite Operative
Stihl 038 Mag II
Thinkin I need a Poulan/Pioneer 455 or 525. Possible newer Pioneer 52/62 (or of coarse 655!!!!!)
I have this to swap. Must be good condition as this saw has been in my family since new and I rebuilt the whole think 6 years ago. Never used it since build. Ported, new piston thats lightened up some. All there, OEM West Coast edition. (triple port muffler).
No china stuff, all Mahle
Saw shop originally cut slots in tank and filter cover for addition air.
Very nice saw I fell 50 old growth trees with it prior to build. Been stored in my attic since then!!!!
Scratches few small cracks etc, spent a life on the landing! Its headin to feebay to fund my pioneer fetish if not!
Duane
Thinkin I need a Poulan/Pioneer 455 or 525. Possible newer Pioneer 52/62 (or of coarse 655!!!!!)
I have this to swap. Must be good condition as this saw has been in my family since new and I rebuilt the whole think 6 years ago. Never used it since build. Ported, new piston thats lightened up some. All there, OEM West Coast edition. (triple port muffler).
No china stuff, all Mahle
Saw shop originally cut slots in tank and filter cover for addition air.
Very nice saw I fell 50 old growth trees with it prior to build. Been stored in my attic since then!!!!
Scratches few small cracks etc, spent a life on the landing! Its headin to feebay to fund my pioneer fetish if not!
Duane
Last edited:
A Pinto has to be a Mini-Mac.
Warped5
WingNut
Yah, when you hit them the right way they explode!
o8f150
Tree Freak
does anyone have a huskie 141 that got busted up but still runs,, i have one with fantastic plastic but the piston is smoked and a few pieces missing,, i have cash and a few chains and maybe a bar or 2 to trade
tomdcoker
Addicted to ArboristSite
I have seen one of those and I can not remember what engne it had. If memoiry serves me correct, and I do not think it does this time, it had a Datsun engine, but the thing that I do remember about it was 53 MPG. Tom
ChainsawmanXX
Addicted to ArboristSite
Needing a few things.
066-
24"+ B&C .063
Cylinder cover
08S
throttle trigger
B&C
D36 McCulloch recoil spring.
066-
24"+ B&C .063
Cylinder cover
08S
throttle trigger
B&C
D36 McCulloch recoil spring.
jimbo1490
ArboristSite Guru
jimbo1490
ArboristSite Guru
procarbine2k1
Addicted to ArboristSite
I am in need of a good 075 recoil/ fuel tank assembly, need one bad! Misc. parts, bars, chains to trade. Would like to get my hands on a Homelite 8800, have a Echo QV8000 resue saw for trade.
jimbo1490
ArboristSite Guru
I have several brand new 16" .325 X .063 Stihl brand bars.
Around here the Stihl dealer charges about the same for a USA made Stihl brand chain as the Home Despot does for their no name Chinese made chain. Of course if you roll your own that's a different story.
Jimbo
Can you use any 18"s? I have two new ones in .325" with new chains.
wigglesworth
Booned
I could use one if Ed dont take em....
I think I can spare one your way...If Ed needs more than one I can make another out of an old Mac 10-10 bar.
arent you a 3/8s man? hehe
