Swap meet...

[gcsupraman]

Anybody need anything off a Husqvarna 238SE??

PM me

-Greg

 

[timberdollars]

Homelite Super Xl

Looking for a Piston and cylinder for my 15 year old sons saw, He bought it last year scored bad and been using it since. Now he wants it fixed.

My saws aren't good enough for him! He likes "HIS"

Super XL Auto (A code)

Thanks
Duane

trades or tainted green parchment paper.

 

[Jacob J.]

Looking for a Piston and cylinder for my 15 year old sons saw, He bought it last year scored bad and been using it since. Now he wants it fixed.

My saws aren't good enough for him! He likes "HIS".

Good for him. I had my own saw when I was 15 and that's what I used.

 

[acguy]

It's a long shot, but I need an 046 tank. PM if you have anything.

I just bought a 044 on Ebay that turned out to be a 046 (dont get me started). If I get stung with the purchase, and the seller turns out to be a dud, you can buy the tank. It is very nice, but I needed a 44.

 

[MS460WOODCHUCK]

I have an 036 pro that runs good but the compression is low on it. It's in decent shape but the engine cover has a good sized crack in it and the clutch cover has a piece broken off towards the back of it. I'm looking to trade it off or sell it. Would really be interested in trading it for a good 026/260 but I'm open to offers. If interested in it shoot me a PM.

 

[Mastermind]

Seeking a 372xp crankshaft.

I've got stuff to trade. :msp_thumbup:

 

[Bowtie]

I have a new 064/066 fuel tank chain guard (p/n 1122 351 0901) that I cant use, and an 064 fuel tank handle with one small piece chipped off the lower handle.

 

[hanniedog]

Anyone have an Husky 246 they would be wiling to let go of? Have a 028Super as a trade or?

 

[Bowtie]

I have a new 064/066 fuel tank chain guard (p/n 1122 351 0901) that I cant use, and an 064 fuel tank handle with one small piece chipped off the lower handle.

Chip guard is spoken for.

 

[Jacob J.]

I just bought a 044 on Ebay that turned out to be a 046 (dont get me started). If I get stung with the purchase, and the seller turns out to be a dud, you can buy the tank. It is very nice, but I needed a 44.

I took a look at the auction you mention, that's not an 046. It's an 044 or MS-440. The 046 and MS-460 always came with compression release
and the saw pictured in the auction has no compression release.

 

[stihlboy]

Looking for 084 and 064/066/660 carcasses, or parts.

and a partner 5000+


stuff to trade

mac 610: runs needs recoil spring

032av ran but was surging, needs recoil rope

3 super2s

mac 35

and of course green paper

Somebody?anybody? Please! i beg of you

 

[epicklein22]

I need 2 046/460 tanks. Got a tank from a member late last year and just put it together this past weekend. She is a leaky SOB . And I just picked up another 460 builder last week in need of a tank.

 

[Mastermind]

Seeking a 372xp crankshaft.

I've got stuff to trade. :msp_thumbup:

Bump!!!! Fire for effect!!!!!! :smile2:

 

[epicklein22]

Looking for a Piston and cylinder for my 15 year old sons saw, He bought it last year scored bad and been using it since. Now he wants it fixed.

My saws aren't good enough for him! He likes "HIS"

Super XL Auto (A code)

Thanks
Duane

trades or tainted green parchment paper.

I have a complete saw and a parts saw. Would like to sell/trade them together.

 

[promac850]

...[snip]...
The Cummins was basically unchanged, and a bus, freightliner, etc can be directly swapped into a Dodge truck... (alternator/charging might need work...) but other than that, they are the same...
...[snip]...
J

You're telling me you can fit a 525 Cummins from a diesel pusher motor home into a little Ram?

It ain't gonna fit... that engine is about 3.5-4 feet tall from the bottom of the oil pan to the top of the valve cover... you'd have to heavily modify the frame/suspension and everything else on a pick up truck to get that thing to fit.



Anyhow, I am looking for an air filter for a Mac 790... gonna need one on hand for when that thing does get put together.

 

[8433jeff]

You're telling me you can fit a 525 Cummins from a diesel pusher motor home into a little Ram?

It ain't gonna fit... that engine is about 3.5-4 feet tall from the bottom of the oil pan to the top of the valve cover... you'd have to heavily modify the frame/suspension and everything else on a pick up truck to get that thing to fit.



Anyhow, I am looking for an air filter for a Mac 790... gonna need one on hand for when that thing does get put together.

No, what he said is any 5.9 Cummins will fit betwixt applications. Common as dirt in the construction and transportation industry. Now, there may be a few exceptions here and there, but a non turboed one was replaced with a motor from a totaled pickup on a roller packer for the outfit I worked for. Only 20 years difference in the model years. A Dodge gasser 1 ton is a 3/4 ton diesel, so yes, the frame is modified. It fits.

 

[Jacob J.]

Somebody?anybody? Please! i beg of you

I have a lot of 084 gear but I'm not interested in any of the junk you listed. I'll trade for 70-90cc pro saw gear.

 

[tbone75]

Need a air filter cover for a Stihl 021/025.Trade some green paper for it!

 

[Jacob J.]

Was someone needing a flywheel/ignition set for 088/MS-880? I have a combo, but it's the rev-limited set.

 

[sefh3]

Need a air filter cover for a Stihl 021/025.Trade some green paper for it!

Is your top curved or straight where the air filter cover connects to the main body?