Swap meet...

[mp5n]

Looking for Husqvarna 576XP parts

I need the following parts for a Husqvarna 576XP:

Crank
Cylinder
Piston
Muffler

If anyone can help out please PM.

Thanks in advance,
MP5N

 

[mp5n]

Looking for a muffler for a Stihl MS200T

Looking for a MS200T muffler.

If anyone can help out please PM.

Thanks in advance,
MP5N

 

[dh1984]

You may have misunderstood my comment so I'll explain. I think you are a grifter.....that's someone that takes advantage of others in case you don't understand so well.

That, rather than doing for yourself is a handicap you may never overcome.

i don't take avantage of no one and i will over come it i'll just go on my own and do it for myself and not ask for much on here

 

[cbfarmall]

i am challenged with a learning disability but i can still learn new tricks and everything. But the reason why i come on here to see if anyone has what i'm looking for is. I thought it would be better to send my money to a other membe instead a over the seas company.

but maybe i was wrong

Oh boy, here comes his 19th nervous breakdown. Didn't see this one coming, not at all.

You may have misunderstood my comment so I'll explain. I think you are a grifter.....that's someone that takes advantage of others in case you don't understand so well.

That, rather than doing for yourself is a handicap you may never overcome.

Just so there's no doubt, I'm with Randy on this one...SSDD.

I offered several suggestions for his 041 flywheel issue, all of which were ignored. That was all well and good, till he revealed his saw was a wore out piece of junk. (Where I'm from this is called 'wasting my time.') An important detail left out, and one that should not have gone unnoticed by anyone with ANY experience working on saws.

Chris B.

 

[Eccentric]

Do you mean morally or mentally? He was smart enough to figure out that even after being banned multiple times he could buy his way back onto this site by becoming a sponsor.

You just earned yourself some "Damned Straight!" rep for that one.

 

[barneyrb]

Oh boy, here comes his 19th nervous breakdown. Didn't see this one coming, not at all.



Just so there's no doubt, I'm with Randy on this one...SSDD.

I offered several suggestions for his 041 flywheel issue, all of which were ignored. That was all well and good, till he revealed his saw was a wore out piece of junk. (Where I'm from this is called 'wasting my time.') An important detail left out, and one that should not have gone unnoticed by anyone with ANY experience working on saws.

Chris B.

Calvin #2........

 

[dh1984]

well let me tell you all something i didn't say i was a chainsaw macanic i just said i took them up as a second hobby.

they only thing i realy good at is rebuilding truck and car engines. I just work on chainsaws to past time when i don't have anything else to do.

But i tell you if you put a 350 4 Bolt main in front of me i can make that thing scream like a wild cat down the drag strip. i done it for my high school when i was going to school.

so on the 041 farmboss i picked it up with 2 other saws that didn't run and got 2 out of 3 running but give me time when i find all the parts i need to get it going i will get it sooner or later.

i wasn't trying to ignore anyone i was trying one thing at a time. i had it running onced before i switched the case half out for a other half that didn't have a hole in it. after that i couldn't figure out what was wroung with it.

So i'm looking for all the parts to restore it back to running condition and i'm going to repaint it with factory stihl paint and new badges. then set it on a shelf and not use it unless someone wants to see it run.

So fellows please lay off my back please i didn't really mean to act so stupid about it but i really just learning on saws right now.

 

[oldmanriver]

McCulloch 200 Trade?

I've got a farm fresh McCulloch model 200 that I'm looking to trade for another Stihl project saw. Just got the 200 recently and havent got into it yet. It is 100% complete, has compression and a bar and chain as well. Really dont want to part it out because it will make a great restore project for the McCulloch fan. PM me if interested Z

 

[SawGarage]

Sorry, getting old and feeble minded. :msp_rolleyes:

The antivibe/handle protector is for a Jred 920/930.

Its the half round piece of metal that screws to the case in front of the lower handlebar mount.

OH, ok.... for a 920/930 :bang: we WERE on the topic of 625-630 saws...

PM sent...

I could use a tank vent and p/c for a Jonsered 2094. Have plenty to trade.

I have a NOS 2095 p/c.. shoot me a PM if interested

... give me time when i find all the parts i need to get it going i will get it sooner or later.

So i'm looking for all the parts to restore it back to running condition and i'm going to repaint it with factory stihl paint and new badges. then set it on a shelf and not use it unless someone wants to see it run.

So fellows please lay off my back please i didn't really mean to act so stupid about it but i really just learning on saws right now.

I don't want to pick on you, BUT... wait on it, and find a MUCH better example of a 041, or a 041 Super... it will save you TIME AND MONEY over rebuilding the one you have...

BUT, if you MUST restore the saw, I have some VERY nice (some NOS) parts for that saw

 

[Mastermind]

OH, ok.... for a 920/930 :bang: we WERE on the topic of 625-630 saws...

PM sent...




I have a NOS 2095 p/c.. shoot me a PM if interested







I don't want to pick on you, BUT... wait on it, and find a MUCH better example of a 041, or a 041 Super... it will save you TIME AND MONEY over rebuilding the one you have...

BUT, if you MUST restore the saw, I have some VERY nice (some NOS) parts for that saw

I know someone that may be interested in all the NOS 041 parts you have J.

Send me a PM....

 

[dh1984]

OH, ok.... for a 920/930 :bang: we WERE on the topic of 625-630 saws...

PM sent...




I have a NOS 2095 p/c.. shoot me a PM if interested







I don't want to pick on you, BUT... wait on it, and find a MUCH better example of a 041, or a 041 Super... it will save you TIME AND MONEY over rebuilding the one you have...

BUT, if you MUST restore the saw, I have some VERY nice (some NOS) parts for that saw

ok i'll wait untill i find one in better shape than this one is. i been looking on e-bay for them and they are high as heck on there.

 

[SawGarage]

Send me a PM....

:msp_rolleyes:


FINE! but last time you never returned my call, and I stayed up for days.. I keep falling for the same old tricks with you, Randy...
umpkin2:

 

[Mastermind]

:msp_rolleyes:


FINE! but last time you never returned my call, and I stayed up for days.. I keep falling for the same old tricks with you, Randy...
umpkin2:

Welp the feller I build that cherry 041 Super buys up every 041 bit and piece he sees.

Let him know you have them.....

 

[Jacob J.]

:msp_rolleyes:


FINE! but last time you never returned my call, and I stayed up for days.. I keep falling for the same old tricks with you, Randy...
umpkin2:

Randy is a love 'em and leave 'em kinda guy and he doesn't return calls... :hmm3grin2orange:

 

[Mastermind]

Randy is a love 'em and leave 'em kinda guy and he doesn't return calls... :hmm3grin2orange:

Welp I am a busy man........

 

[oldmanriver]

Theres a lot of folks that would love to get their hands on some nos 041 parts... me included :msp_smile:

 

[Eccentric]

Randy is a love 'em and leave 'em kinda guy and he doesn't return calls... :hmm3grin2orange:

Welp I am a macho man........

 

[bplust]

Theres a lot of folks that would love to get their hands on some nos 041 parts... me included :msp_smile:

I have a new one of these if anyone's interested:

Chainsawr Stihl 041 AV, Farmboss Chainsaw Bosch Inner Flywheel type 1 (late model for points)

 

[oldmanriver]

I have a new one of these if anyone's interested:

Chainsawr Stihl 041 AV, Farmboss Chainsaw Bosch Inner Flywheel type 1 (late model for points)

Find myself looking for a nos 041 fanwheel from time to time... got any nos fanwheels

 

[Mastermind]

I do like purple. Is that so bad? :msp_confused: