Swap meet...
- Thread starter Four Paws
- Start date
Help Support Arborist Forum:
Need an 028 chain brake handle. WB version doesn't fit, different set up. Trying to help my dealer here. He tried ordering one twice and it was backordered/NLA. Saw owner is in his late 70's/early 80's, so we want him to have one when cutting.
flyingtim01
ArboristSite Member
Jred 621
Hey Guys,
I'm looking for a 621 to scavenge some parts off of. Mine has a good jug and piston, so if you've got a complete one with a blown cylinder (or other state of disrepair) let me know!
Hey Guys,
I'm looking for a 621 to scavenge some parts off of. Mine has a good jug and piston, so if you've got a complete one with a blown cylinder (or other state of disrepair) let me know!
plumbcrazyjr
ArboristSite Operative
my 394xp has been traded to hagen70
thanks
thanks
Saw Dr.
Junk Collector
What's the P/N? I have an 028 brake NOS, but not sure which one you need.
I also have an 028 chain brake handle/spring hardware. I believe it is the complete hardware required. PM me if needed, can send pics.
Here is I what I believe is the PN:
1118 790 9100
Needs to look like the one in this ebay auction:
http://cgi.ebay.com/Stihl-028-AV-Ch...ultDomain_0?hash=item3ca77de04c#ht_500wt_1182
Sp125
Well, the 125 is coming along well. Now I need a bar - preferrably 36" x .404 but can use 3/8". This this oils up through the bar adjuster holes.
Well, the 125 is coming along well. Now I need a bar - preferrably 36" x .404 but can use 3/8". This this oils up through the bar adjuster holes.
Did you grind off your chain brake boss? I found a couple used sprocket covers I have here that are the early style without the boss.
On the bar, do you want a regular sprocket nose, hard tip, or external roller nose? I'm headed up to my retired log cutter buddy's shop on Monday and can pick up whatever you want. I need to get a roller tip 36" Mac bar for another member anyways.
Logman
ArboristSite Lurker
Dayton 4.5 Cu
Saw still for sale ?
Please pm me if it is .
Thanks Jack
I have a nice Dayton 2z463 (Poulan 245) I'm looking to trade for another 60-70cc saw. Runs good and looks good but is temperamental.
Saw still for sale ?
Please pm me if it is .
Thanks Jack
Logman
ArboristSite Lurker
245a
Just wondering if the saw is still for sale ? please pm me if it is .
Thanks Jack
Just wondering if the saw is still for sale ? please pm me if it is .
Thanks Jack
yo2001
ArboristSite Operative
Few Stihls that is up for trade.
I have 2 036's. One older and one little newer. Both saws run well. I've not got around checking compression. the plastic are faded. One needs a longer pull cord.
Also have a complete and running MS440. The compression was 165psi. Small crack on the tank where the handle connects but not broken. Every now and then the saw stalls at idle. It might be due for seal(s) The crank feels tight. Not real looker but a runner.
Want to trade for a 660 or 066 and also looking for a mill set up still. Or throw me a offer or trade. Thanks
pictures
I have 2 036's. One older and one little newer. Both saws run well. I've not got around checking compression. the plastic are faded. One needs a longer pull cord.
Also have a complete and running MS440. The compression was 165psi. Small crack on the tank where the handle connects but not broken. Every now and then the saw stalls at idle. It might be due for seal(s) The crank feels tight. Not real looker but a runner.
Want to trade for a 660 or 066 and also looking for a mill set up still. Or throw me a offer or trade. Thanks
pictures
yo2001
ArboristSite Operative
more pics
Bowtie
Gearhead
more pics
that looks more like an 034 or an 034 Super. What does the bore measure?
yo2001
ArboristSite Operative
It could be a 034 super, my 034 jug would not fit the piston so it's the larger bore piston. The serial number starts at 1xx so it;s German and older. How do you tell difference between 034 and 036?
Bowtie
Gearhead
Im not 100%, but all 034's I have worked on had the plastic starter housing, and the style of muffler like the one pictured. That muffler I have never seen on an 036 from the factory. Front chain adjust or side? (034's had both).
Also never seen a factory 036 with the plastic starter cover, but again, I could be wrong. Nothing bad though, if a 34 jug wont fit, then it must at least be an 034 Super.
I used longer screws and spaced the dog out with nuts. Then I just had to grind a small dip in the dog to clear the top of the boss. I'm real happy with it. Just didn't have the heart to grind the boss. I have a bid in on a 36" roller nose on ebay - over tomorrow. If I don't win it, I'll be interested. Guess I'd prefer a roller nose but sprocket would be fine as well.
Thanks!
yo2001
ArboristSite Operative
I've notice the same thing. All my 034 AVS has been like the one you pointed out with 026 style starter cover and muffler cover with holes on the front. The other saw has starter cover that's wider but still plastic and side discharged muffler. Both are side chain adjuster. I did notice the one that looks like 034 is made in Germany saw.
Another weird thing is the platic chainbrake assembly cover doesn't cover the bottom half sort of like the ones from early 026.
We sold many, many 036s with the plastic starter housing....
Looking to trade some cash (I already traded all my project saws away...sorry) for a saw that is small and reliable for my father, something tolerant of neglect and sitting unused for long periods. Echo CS-300/340 family would be ideal, but open to other ideas
