Swap meet...

[ChainsawmanXX]

Yay! Haha

Anyone got an 026 P&C???
I have lots to trade!!

 

[sefh3]

Can anyone confirm this? QUOTE]

What cover do you have? The 260 has a decompression and the 026 doesn't. You can swap the p.c but you will need to plug the decompression or just run it without one. I'll check tomorrow, I might a cylinder from an 026 without decompression if that will work.

 

[sefh3]

Does anyone have a wrap handle and air filter for a Clinton D35? I have parts to trade.

 

[Mastermind]

Anyone need some Homelite Super 650 parts??? I got some! PM for the details, no muffler, clutch, drum, or rear handle lower half, or flywheel. Most else is there!

I need the lever that works the decomp and the black fan shroud on the recoil.

 

[Mastermind]

does anyone need about 8 feet of 1/4 pitch chain,, it is new just dirty,, i believe it is windsor semi chisel,,, i also have a bunch of ties and straps for it too,, all i ask is for the shipping of it or i could use about 10 ties and straps for 325 pitch oregon/windsor chain

I could use some 1/4" pitch chain.......and I have some .325 tie straps when I find em.....

 

[Jacob J.]

I could use some 1/4" pitch chain.......and I have some .325 tie straps when I find em.....

Randy-

I have 300' of 1/4" chain, you're more than welcome to some of it.

 

[ChainsawmanXX]

Can anyone confirm this? QUOTE]

What cover do you have? The 260 has a decompression and the 026 doesn't. You can swap the p.c but you will need to plug the decompression or just run it without one. I'll check tomorrow, I might a cylinder from an 026 without decompression if that will work.

Ill check to see if it has a decomp! Thanks scott! Let me know.

 

[axlr8]

okay....this might be a lil far out there, BUT, im in the market for a 044/046/066 somthing of that nature, I will be rebuilding it, new seals, maybe bearings, uhh, new bar, chain, gaskets, and other parts, im looking for a CHEAPer project saw here guys, lets talk trades....cause....leaves are the only green thing i see growing on trees here! BUT im game for anything 034 Super and up! and in DECENT shape!

 

[nstueve]

Need a 260 pro piston an rings if ya got it. Got plenty to trade!
Dont know if an 026 piston will work/

You can use either top end you want on an 026. For some reason I thought some of the ms260's didn't have a decomp but maybe i'm wrong. I know the 026's had both decomp and non-decomp. Either way you can order a new Meteor piston from northwoodsaw for $35 with rings. I usually replace rings if I need a piston too... Rings cost $5-$15 so sometimes cheaper to just buy the piston ring package together. Both 44.7 and 44 pistons can be seen here... Best prices and quickest shipping i've found by far!!!!!!!

Quality replacement pistons from Meteor and Episan

 

[oldmanriver]

You only have to actually activate it once................................twice for really stubborn ones!
Electricity is a wonderful teaching tool when applied correctly.


Mike

Electricity is a great teaching tool...... The first time I touched it it taught me to make sure the damn breaker turned off before ever touching it again :cool2:

 

[Work Saw Collector]

Reported in a different thread.

 

[o8f150]

does anyone need about 8 feet of 1/4 pitch chain,, it is new just dirty,, i believe it is windsor semi chisel,,, i also have a bunch of ties and straps for it too,, all i ask is for the shipping of it or i could use about 10 ties and straps for 325 pitch oregon/windsor chain

going to tn

 

[nstueve]

Electricity is a great teaching tool...... The first time I touched it it taught me to make sure the damn breaker turned off before ever touching it again :cool2:

Couldn't it be handled in the Trading Post? Or maybe there's something lacking there? Or maybe a For Trade Only section?

Reported in a different thread.

Doesn't matter... Got a collar and no one need talk about it any longer. :msp_razz:

 

[HittinSteel]

I'm looking for a small outboard boat motor 3-5 HP range. I'd be willing to do a trade of equal value or cash either way on one of the saws in my signature (except the 372 of course ).

 

[cnice_37]

Can anyone use a slightly scored 038 Super jug?

The inner cylinder cleaned up decent, but there are a couple minor scratches. Could be worth trying to get running.

Will "give" away - just pay shipping. I do have pics, but I suck at taking the closeups.

It also has a chipped (read : the corner BROKE off) heat fin.

I would have used the jug, but found a good deal on a mag.

 

[Mastermind]

Randy-

I have 300' of 1/4" chain, you're more than welcome to some of it.

Scott hooked me up......I just need a little for my grandson's XL2....

 

[roncoinc]

For the little top handles....brand new.
will consider anything but steal parts..

 

[Eccentric]

For the little top handles....brand new.
will consider anything but steal parts..

That will also fit the 240/245 in addition to the whole range of XL/XL2/Super2/Bandit/180/190/200/etc top handle Homelites.

http://www.acresinternet.com/cscc.nsf/BMP/12?OpenDocument

 

[axlr8]

I'm looking for a small outboard boat motor 3-5 HP range. I'd be willing to do a trade of equal value or cash either way on one of the saws in my signature (except the 372 of course ).

Hey! i just picked up a old Firestone 7.5 horse, I havent even fiddled with it! has good compression and a somewhat decent prop, and she has forward, reverse, and nuetral! let me know!


and I picked up a whole box of husky 51 and 55 parts today, and it has a CHOKE lever if anyone still needs it!

 

[ZeroJunk]

Anybody out there got a good ignition for a Jonsered 525 ?