Swap meet...

[jockeydeuce]

Anybody out there got a good ignition for a Jonsered 525 ?

I don't have an IPL for the 525, but if it's the same as the 535, I might have one. The 535 shows part # 506 02 72-02

 

[ZeroJunk]

I don't have an IPL for the 525, but if it's the same as the 535, I might have one. The 535 shows part # 506 02 72-02

I don't have the IPL either. Perhaps somebody else can confirm whether or not they are the same.

 

[nstueve]

I do have pics, but I suck at taking the closeups.

\

For those that have this problem... Try finding the "micro" pic setting it looks like a small flower. Seen on the bottom of the dial in this picture.
http://www.basic-digital-photography.com/image-files/a-guide-to-camera-modes-1.jpg

select the micro feature and you should have a way easier time taking small photos (ie:inside jugs...)

 

[Jon1212]

\

For those that have this problem... Try finding the "micro" pic setting it looks like a small flower. Seen on the bottom of the dial in this picture.
http://www.basic-digital-photography.com/image-files/a-guide-to-camera-modes-1.jpg

select the micro feature and you should have a way easier time taking small photos (ie:inside jugs...)

Did someone mention pictures of "Jugs"?

 

[Preston]

\

For those that have this problem... Try finding the "micro" pic setting it looks like a small flower. Seen on the bottom of the dial in this picture.
http://www.basic-digital-photography.com/image-files/a-guide-to-camera-modes-1.jpg

select the micro feature and you should have a way easier time taking small photos (ie:inside jugs...)

I know for a fact this works. I took a pic of a spider spinning up a moth and the detail was unreal. But don't quiver. Mine camera is sensitive. :msp_wink:

 

[PogoInTheWoods]

\

Try finding the "micro" pic setting

Macro, mang.

 

[bplust]

I'd like a Partner p100 two-piece coil setup.

Does anyone know if the single piece setup will bolt on? If so, I'd rather have the single piece one.

Thanks a lot, I know it's quite the shot in the dark, but I'd like to have an extra around.

Or an extra p100/pm1000, wouldn't mind one of those.

Have lots to trade, or the classic, which lives in a miniature ceramic pig.

 

[Arrowhead]

I screwed up and bought the wrong 026 filter. I need a non-pro filter (no hole in the back). I'd like a new one, or good used one. I have this one to trade, or parts or cash. If anybody needs this one, I'll take a loss and ship it for $8 total.

 

[axlr8]

I want the filter, Pm for my address, and send yours while at it!

 

[Arrowhead]

I want the filter, Pm for my address, and send yours while at it!

It's yours. Pm'd

 

[DSS]

Anybody out there got a good ignition for a Jonsered 525 ?

I don't have an IPL for the 525, but if it's the same as the 535, I might have one. The 535 shows part # 506 02 72-02

I have a 525 somewhere if Rob doesn't fix you up.

 

[Streblerm]

330 brake band NLA. I'm sure one of these poulan guys know for sure. Heck I'll dig too. Also look at the brake band in the 3450, 3750, 380, etc.

Here is a new complete green 3750 brake cover with band. PN# 507476721 ASSY CHAIN BRAKE GRE $23.58

Yeah, no parts were ever available for the 330 et al clutch cover/ chain brakes. Only the entire unit was available There is nothing wrong with my clutch cover other the broken band so I hate to just replace it. Especially with a green one

Thanks for looking though.

 

[Uncle Rico]

36" Oregon Power Match Bar D023

I came across an older Power Match bar that has seen little or no use. It has a little rust a few marks, and is missing the sprocket tip. 363ZZZD023 - I believe the mount fits older Homelites and Jonsereds.

I'm looking for a helper handle with roller, the grandberg handle or smiliar would work. Also looking for .404 .063 ripping chain or full comp chain. Let me know if you're interested.

View attachment 243311
View attachment 243312
View attachment 243313
View attachment 243314

 

[thomas1]

Does anyone have a handle and filter for a ms211?

 

[tbone75]

Does anyone have a handle and filter for a ms211?

They are hard to find! I bought another junk saw just for the handle and top cover and filter.

 

[farrell]

looking for a good clutch cover for a husky 372xp if any body has one they can part with. pm me. thanks!

 

[Mastermind]

Yeah, no parts were ever available for the 330 et al clutch cover/ chain brakes. Only the entire unit was available There is nothing wrong with my clutch cover other the broken band so I hate to just replace it. Especially with a green one

Thanks for looking though.

For that price you could buy and gut the new cover for parts.....just a thought.

 

[blsnelling]

Anyone have a scored 385 or 390 cylinder laying around? Doesn't matter how bad it is.

Still looking. PM me.

 

[thomas1]

After I posted about needing parts for the 032 I get all these post in my inbox. Now I guess I'll have to unscribe from it. Seems like there are some on here that are really good friends and have to the carry on their conversations on line. Not chainsaw stuff but trival PM talk. Sorry bout that but it's very irritating to get all the post from the swap thread and they have nothing to do with swapping anything. Just bs.:msp_confused:

I know for a fact this works. I took a pic of a spider spinning up a moth and the detail was unreal. But don't quiver. Mine camera is sensitive. :msp_wink:

...

 

[thomas1]

They are hard to find! I bought another junk saw just for the handle and top cover and filter.

I may end up going that route, if I run across one.