the all aussie dribble thread!

[VinceGU05]

View attachment 456874

My wife's 2 week old cars tyre does this like a manufacturing fault or what she is sure she hasn't hit anything. Weird as there is no damage to the rim

I would try emailing continental and see what they have to say. Sure is a doozy. !

 

[peter92]

heres a pic of the starter i need for my MOBILCO BIG 10 AH81 Tecumseh engine if any one finds it please

 

[chippy]

I PRESENT THE BIGGER AND OLDER COUSIN TO OZ RACING 25.4.

ROCKET RYOBI RCS4640M
Complete with 4*7mm hole MM and semi removal of screen'S

Hmm.

Looks like we might have some serious racing coming up....

Now to find some decent 6" logs for the competition.

Did you consider cutting off the rear handle to make it a true top handled racer?

 

[Creeker]

Re KAMBA chippy, agree the weeds need a good dousing, volume wise, to be effective. I successfully gave some thick Capeweed areas a heavy dose 1st time round, then other areas where I skimmed a little needed another light hit to finish them off.

Clover - worked quite well, cleaned up lawn areas where sprayed. Bindi - good also.

I was well covered in use but wondered if you get exposed to it when the grass is damp in the mornings on later days and you walk in it with thongs/Crocs or other footwear that has uncovered skin. Might just be the season for Rye grass pollen but first time in 30yrs I've had any allergy event so considering everything.

 

[VinceGU05]

View attachment 456874

My wife's 2 week old cars tyre does this like a manufacturing fault or what she is sure she hasn't hit anything. Weird as there is no damage to the rim

just looking at it again.. i reckon they did that when fitting the tyre. didnt have the tyre pusher on the bead. instead it dug into the sidewall.. with a bit of driving the cords have snapped and volia.

 

[chippy]

just looking at it again.. i reckon they did that when fitting the tyre. didnt have the tyre pusher on the bead. instead it dug into the sidewall.. with a bit of driving the cords have snapped and volia.

You might be onto something there Vince....but it's never easy getting stuff like that replaced for free regardless....

 

[VinceGU05]

You might be onto something there Vince....but it's never easy getting stuff like that replaced for free regardless....

too true

 

[460cixy]

Arrr fantastic. Well the hoses are ok. Just very soft. Just gotta find a good 8mm hose clamp.

Yeah there allways really soft. The clamps originally were just little spring loaded wire a bit like fuel hose clamps on older jap bikes ect

 

[VinceGU05]

just love it.. crack the shtis with the laptop and slam the lid.. now wont boot.. need new hard drive. rite on a long weekend.. oh well .. and least it will run much faster once done.

 

[VinceGU05]

Maybe I should thrown it in with this lot.

 

[peter92]

just love it.. crack the shtis with the laptop and slam the lid.. now wont boot.. need new hard drive. rite on a long weekend.. oh well .. and least it will run much faster once done.

at least you didnt throw it like i did Vince and still needed a hard drive replaced

 

[postrip]

Another rebuild completed.
Added some .404 cutting equipment.
Time 4 it to murder some more trees

 

[Stihlman441]

Nice
Them bars are crap
I can help ya out and even give ya somfin for it.

 

[Creeker]

Ignore him postie, he's got no idea, lol

Haven't fitted either of my 2x25" ones to the 066, still getting by with the old Stihl bar
but judging by the "look" of that bright orange GB Titanium a 50% increase in output could well be
expected, speaking conservatively. (must be on the red again lol)

Edit...postie, are you going to use the greasing point on the tip or rely on the oiler doing the job, I've been thinking about what course to take when I get one fitted. TIA

 

[derwoodii]

venting time ffs why do these ftards drive hard on the center line??? it seems a growing trend as well i followed this numbnuts for miles as sat fds wheel hard on the white line with approaching trucks cars some how ignored later it braked hard at an intersection light were green........

 

[derwoodii]

some gold plated Ftards found in here

https://www.facebook.com/DashCamOwnersAustralia/?fref=ts

 

[postrip]

Ignore him postie, he's got no idea, lol

Haven't fitted either of my 2x25" ones to the 066, still getting by with the old Stihl bar
but judging by the "look" of that bright orange GB Titanium a 50% increase in output could well be
expected, speaking conservatively. (must be on the red again lol)

Edit...postie, are you going to use the greasing point on the tip or rely on the oiler doing the job, I've been thinking about what course to take when I get one fitted. TIA

I always grease the nose, if it has the hole 4 it.
The new powermatch Oregon bars ain't much chop either, and the local steal dealer wants $170 per 20" .404 .063 bar....... Fark that!

 

[Creeker]

I thought LCS (site sponsor) offered excellent value, got 2, couldn't go wrong really at $90 ea. del'd.

 

[rogue60]

If you have ever been stung by one of these little fuckers you will know pain! haha

 

[peter92]

If you have ever been stung by one of these little ****ers you will know pain! haha

Yeah i know what ya mean, got stung on the ball bag, little bugger got into my swag