VinceGU05
PSA vitim.
doesnt look like a 084 to me. i would like to see more shots of it.
here is a real one.. maybe its a 088?
and too much for the green machine. i bought mine new for 69 bucks.
the all aussie dribble thread!
- Thread starter masculator
- Start date
Help Support Arborist Forum:
doesnt look like a 084 to me. i would like to see more shots of it.
here is a real one.. maybe its a 088?
and too much for the green machine. i bought mine new for 69 bucks.
KiwiBro
Mill 'em, nails be damned.
bennn*e
Addicted to ArboristSite
- Joined
- Apr 3, 2009
- Messages
- 1,066
- Reaction score
- 1,807
That's a good buy for the 6401 just put a 54mm too end on it and away you go
chippy
Addicted to ArboristSite
That Ozito looks like a Chinese rip off mate.
postrip
ArboristSite Operative
Stihl plugging away in the shed, repairing an 038 magnum with a fuel leak...
Jimbo209
ArboristSite Guru
084 looks like a 1122 660/066/650?
Clean 6401. May be worth the 150 to secure it
Jimbo209
ArboristSite Guru
That'll do it.
Bog and plate or new handle.
Do you like the chinka ones or nos/less used stock.
VinceGU05
PSA vitim.
Will need a few tubes of JB Weld for that one [emoji16][emoji106]
peter92
Addicted to ArboristSite
what bar is better, hard nose or sprocket
postrip
ArboristSite Operative
New handle this time round... Oem all the way
Jimbo209
ArboristSite Guru
Appreciation letter
Thanks for all the responses to the raker question last week. Some I did already use others are being added to my procedure.
It looked like there was a few that learned from it as well.
I asked as it was in thread of discussion at the time.
Cheers
James
Thanks for all the responses to the raker question last week. Some I did already use others are being added to my procedure.
It looked like there was a few that learned from it as well.
I asked as it was in thread of discussion at the time.
Cheers
James
2strokenut
One nut loose
the weather bloke sead we are getting snow in Tas tomorow down to 500m.
KiwiBro
Mill 'em, nails be damned.
I'd say horses for courses mate. Cutting stumps at ground level - hard nose. Most of everything else, I prefer sprocket nose. That said, the biggest saw I use is only 79cc, so wadda i know.
hard for dirty stuff stumps etc sprocket for all other less your a full blown woodmans they seem to like the hard nose
postrip
ArboristSite Operative
Bbbbbrrrrrrrrr.... Here I am today sweating my butt off loading 95*c liquid.
And FLY'S, gunna have to cut the A$$ outta my pants to keep them off my face
KiwiBro
Mill 'em, nails be damned.
peter92
Addicted to ArboristSite
Well seen my first LUCAS MILLS in action today at mates place, cutting Stringy into 4x3,4x1.5 4x4, 4x2
quite impressed with it,
Had a 30hp engine, MODEL 10.30 think the blade would cut 10'', if i heard right
but forgot the camera for pics, what a dick
quite impressed with it,
Had a 30hp engine, MODEL 10.30 think the blade would cut 10'', if i heard right
but forgot the camera for pics, what a dick
KiwiBro
Mill 'em, nails be damned.
Sawmills. Yeah, I remember those. Some were good, others were complete and utter crap made by narcissistic ******s who I wouldn't even piss on if they were on fire.
peter92
Addicted to ArboristSite
was a local bloke doing the cutting , great if ya have the timber on the block, compared to the price now of buying it at a yard
KiwiBro
Mill 'em, nails be damned.
Would love to go full bush hermit; buy a bush block, cut/push some roads in, make a clearing, drop and mill enough trees to build a small, off-grid dwelling far away from the insanity of society. Would be a pretty satisfying project.
Had a fair bit of correspondence with Warren Lucas. Seems like a good bloke.
