Withdrawn Thread Closed

[user 123665]

Any 543xp parts or parts saws?

Not that model.

 

[HumBurner]

Not that model.

What about a 346 parts/project saw(s) with decent or better bottom end?

 

[user 123665]

What about a 346 parts/project saw(s) with decent or better bottom end?

No.

 

[HumBurner]

Right on


Thanks!

 

[Timberdonkey_059]

550xp or 365sp parts available?

 

[user 123665]

550xp or 365sp parts available?

I have a half dozen 550 M1 parts saws. I don't have any used 365 parts, but I have lots of new parts that fit the 372 chassis. Send me a list in PM.

 

[Steve Haley]

Husqvarna 257 top cover and clutch cover .

 

[Derf]

I’m interested in if you have a 154/254/257/262 heated top handle, or rear handle heating element.

I’m also interested in the newer oem case splitter tool that bolts to the bar studs for a 562xp with stuffers.

 

[Steve Haley]

I’m interested in if you have a 154/254/257/262 heated top handle, or rear handle heating element.

I’m also interested in the newer oem case splitter tool that bolts to the bar studs for a 562xp with stuffers.

Man I wish I could help you but I don't have any heaters for those family of saws. It seems that those saws and there parts are getting hard to find. The crank stuffers pose a unique problem when splitting cases, there has got to be a easier way. Hopefully OhioRich can help. Steve

 

[user 123665]

Husqvarna 257 top cover and clutch cover .

I may have a top, but don't have a good clutch cover.

 

[user 123665]

I’m interested in if you have a 154/254/257/262 heated top handle, or rear handle heating element.

I’m also interested in the newer oem case splitter tool that bolts to the bar studs for a 562xp with stuffers.

I don't have any heated parts for those.
I have a case splitter, but not for sale.
HL carries this tool. https://www.hlsproparts.com/product-p/575286901.htm

 

[262freak]

Anything left

 

[user 123665]

Anything left

I still have a ton of stuff. Would still like to sell everything together.

 

[Steve Haley]

What would be the best way to get the parts. I am only short drive from Columbus.

I may have a top, but don't have a good clutch cover.

 

[user 123665]

What would be the best way to get the parts. I am only short drive from Columbus.

PM Sent

 

[mbrick]

I'm interested in possibly a few parts saws (not all of them though). I see you mentioned 550xp. What else?
Would you sell 1-3 or prefer lot buy?

 

[user 123665]

I'm interested in possibly a few parts saws (not all of them though). I see you mentioned 550xp. What else?
Would you sell 1-3 or prefer lot buy?

I really only want to sell all of the 550s/562 in one lot.

 

[mbrick]

I really only want to sell all of the 550s/562 in one lot.

Ok, thank you for the reply. I don't know how many you have and how much you are asking but I think that is too much for me.

 

[Jasonrkba]

Looking for piston rings for a pioneer farmsaw. P40, P41 rings are supposed to be the same.

Thanks. Jason.

 

[user 123665]

Looking for piston rings for a pioneer farmsaw. P40, P41 rings are supposed to be the same.

Thanks. Jason.

Unless they cross over to a Husqvarna part number, I know I don't have them.