Time for a little Christmas Giving

[Ironworker]

Hey Brad I'll take that 661 when you're done porting it

 

[fearofpavement]

Spoken for. I will check through my used chains and maybe post up some of those. I have a number of chains that don't fit what I use most.

I will offer up a chain. Tell me what pitch, gauge and dl count you need and I'll see if I can match your need. (and if you have a 72" bar, go away!)

 

[Ironworker]

One 20" and two new 16" pm me address and I will send shipping cost no PayPal usps MO only

 

[sefh3]

I love these threads. Merry Christmas everyone. I'm sure I have something for someone.

 

[tbone75]

I have to say this guys,,,,, this year tops past years for items,,, a lot of good stuff being offered up,,,,,, I will have those chains on here by dinner time,,, I hate asking her but I will need my wife to help me get them together,,, yes I know,, "he needs his wife to et some chains together??" yes I do,, I still not allowed to lift anything with my left arm + it still hurts like a SOB

Take it easy ya Ol Phart , don't go hurting that arm !!

 

[half_full]

Okay, I've got some more stuff that needs a good home. I just ask that you pay actual shipping cost.

Used laminated Husky Lg mount bar. 18" 3/8" pitch 68DL .058

I could use the bar. I'll send a PM

 

[atpchas]

Would love to see this stuff find a new home. All available for shipping.
PM me if there is something you want, I may not catch a response in this thread.

First, a box of Husky 235R trimmer parts. (These are GONE.)


Next, a Husky filter for Lord knows what and a jug which I think is for a 268. It doesn't appear to have any scoring or transfer. (These are GONE.)


Then a bunch of Stihl stuff.
Top row: 3 028 items (note recoil is 3-bolt), starter on the right end needs a spring (recoil & cover GONE)
2nd row: AF base for 1130 saws, slightly used 08S spur drive, 020 hand guard, 050 AF cover
3rd row: incomplete clutch cover and brake handle for 192T, AF and cover f0r 088 (I think), and an 056 fan that someone thought needed to be lots lighter (192T handle & 088 cover GONE)


I have many loops like this - Carlton N1, used but never sharpened, 57 drive links of 3/8LP. (Some loops gone, MANY left)
Will put 6 in a USPS flat rate box.


Three loops of what it says in the photo. Used but maybe never sharpened (don't recall for sure). (These are GONE.)


Last, 2 loops with 81 DLs, one is Oregon 3/8 .050 chisel, one is mystery maker 3/8 .050 semi.
Both used but have many sharpenings left unless you really rock 'em.

 

[Mastermind]

I've got a MS460 STD bore Mako top end, and a BB top end.

Pick one.....I'd rather not see one guy grab em both.

 

[skippysphins]

Randy I will take one

 

[Mastermind]

Which one?

 

[skippysphins]

Pm sent

 

[Mastermind]

OK Chris got the STD bore......who wants the BB?

 

[avason]

Great stuff to be had here for sure!!

 

[z71mike]

No doubt! Killin it this year guys.

 

[Mastermind]

These Mako kits are pretty good. The rings need to be swapped out for either OEM or Cabers though.

I tested a bunch......and I didn't bother with these because they would free port after cutting the base.

 

[Chris_In_VT]

I think this is great! It's a good way for newer members to get to know people, and really shows what this community is all about

Anyways, I found some stuff.
Only asking actual shipping cost.

Jonsered 2171 air filter cover, has a crack in it, crack is probably worse than it looks in the picture. Also have a switch for 2171\372xpg heated handles. Switch claimed, air filter cover still available!

[photo="medium"]2210[/photo] Jonsered 920 chainbrake parts. No band, sorry. Also the STOP switch plate and nut, but no switch. CLAIMED

[photo="medium"]2211[/photo] Jonsered 670 Super II chain tensioner. I have two of these. CLAIMED

[photo="medium"]2212[/photo] Various Jonsered 670 parts- 1 air filter horn brand new, 1 new piston ring, I think it's OEM but can't confirm, 1 stop switch (large size, there are 2 sizes for this saw) and 2 (I think?) aluminum chain catchers. CLAIMED

[photo="medium"]2213[/photo]

 

[Jacob J.]

OK Chris got the STD bore......who wants the BB?

I'll try that Big Bore kit if it's still available Randy. I got a fire fighting saw that would be a good candidate.

 

[o8f150]

ok,,,, here you go guys,,,,, I have 3 loops of Windsor 3/8,,50 gauge,, 60 drivers semi chisel,, 2 has been sharpened a couple of times and I believe 1 is still new,,,, also,,,, NOT PICTURED is 2 loops of carlton chisel,, 3/8,, 50 gauge,, 84 drivers,,1 of them is 1 time sharpened and the other is new,,,,,, I did have some 72 driver loops but those are going to main already,,,,,,,,,,,,,,,,,,,, I have a bunch of new loops of stihl that's been sitting on the shelf for over a year so I decided this would be a good time to change over to those,, I probably will never wear a chain out in the rest of my life time,, I am pretty sure I can fit each bunch into a small priority box,,, ohhhh yea,,, shipping will be on my dime unless they are going out of the country

 

[Mastermind]

It's yours.

Send me an address.

 

[o8f150]

Would love to see this stuff find a new home. All available for shipping.
PM me if there is something you want, I may not catch a response in this thread.

I have many loops like this - Carlton N1, used but never sharpened, 57 drive links of 3/8LP.
Will put 6 in a USPS flat rate box.
View attachment 382831

if no one wants any of these I would like to have several of them,,,, thanks