Timing advance ⅙

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Mid TN tree

ArboristSite Lurker
AS Supporting Member
Joined
Apr 4, 2023
Messages
34
Reaction score
4
Location
37190
I'm wanting to advance the timing on my climbing saw. From reading I file the left side of the key correct?
 

Attachments

  • Screenshot_20250106_194039_Gallery.jpg
    Screenshot_20250106_194039_Gallery.jpg
    568 KB
Man it ran good for about 10 seconds. Really screamed! Then it started missing & popping & wouldn't idle. I put the original back & it still acted funny? I cleaned the coil & mounts & cleared up.
When someone says “really screams”, it often means it’s running way too fast because it’s too lean.
 
I said to hell with that flywheel & put the one that came off back on.
It would only run for about 5 seconds. Fast idle wfo didn't matter. It was very strange
That's what i was going to say after you told me it was MTronic,its best to leave the timing alone and just do the muffler mod, but you already learned this I see.
 

Latest posts

Back
Top