Sold Various Bars & Chains

[redbull660]

Shipping - USPS or UPS. I do have a fedex acct as well but never used it...but can if you desire fedex service.

Payment - personal check, Money order, Paypal gift.


I'll start at the top of pic

note - there is a lot of oil on the sleeves because I did all my test cuts with full oiler and would bring multiple bars with me. So I would put an oiled up bar into the sleeve right away so not to mix up or get scratched up etc.

Stihl ES 25" Bar - 3/8 .050 3-8830 Condition: used for a few test cuts. $58

Stihl 25" RS (rapid super) 3/8 .050 Chain - Condition: used for a few of test cuts. $22

Stihl 25" RD (Rapid Duro Carbide) 3/8 .050 Chain - Condition: re sharpened with diamond wheel once. Sharper than factory ready to go. Ultra clean, looks like new. This was a personal chain and I did put it together with a few pieces from left over reels. Therefore there are a couple of places where there are two left or right cutters in a row. Not a concern, but should be mentioned. $75 I am selling only because I'm moving to .063.

*SOLD Stihl 25" Wide Nose Bar - 3/8 .063 3-9831 - Condition - New. Should mention it says made in brazil. I have another and it works fine. I am only selling because I don't need two. $75

*SOLD Stihl 25" RS ( rapid super) 3/8 .063 Chain - Condition - used for a few test cuts. $22

Stihl 25" RD ( rapid Duro carbide) 3/8 .063 chain - Condition - Used for a few test cuts - $84

Stihl 28" Bar - 3/8 .050 - 3-8838 Condition - used for a few test cuts - $65

Stihl 28" RSLH (Sq. ground half skip) 3/8 .050 Condition - used for a few test cuts - $24

Stihl 28" RS (rapid super) 3/8 .050 Condition - (3 available) (2) used for some test cuts $22 ea. (1) needs to be sharpened $20

Stihl 20" Bar - 3/8 .050 - 3-8822 3/8 .050 Condition - used for a few test cuts - $48

Stihl 20" RS (rapid super) 3/8 .050 Condition - used for a few test cuts - $20

*SOLD Stihl 28" Light Bar 3/8 .063 3-2038 Condition - used for multiple test cuts - $115

Stihl 28" RD (rapid duro carbide) 3/8 .063 Chain - used for a couple of test cuts - $91

Stihl 28" RS (rapid super) 3/ .063 Chain - 2 available - used for multiple test cuts - both are close to needing to be resharpened. They were purchased new and have NOT be re sharpened yet - $20 ea

Carlton/Tsumura 28" 3/8 .063 Bar - Condition - used but taken care of. No issues at all. $75

Left side of pic 1...

Stihl 20" RD (rapid duro carbide) 3/8 .063 - used for a couple of test cuts $72

Stihl RD 3/8 .063 Chain - can make you whatever size chain you want $1 per DL - this chain was all used for a few test cuts and then taken apart. (I wanted all my tests to use brand new chain...so do a few test cuts, next test and replace with new chain)

Stihl RD replacement or back up DL's & Cutters. 3/8 .063gauge. Link of 4 DL's and 1 Left RD cutter and 1 right RD cutter - $4 ea

 

[DexterDay]

Are these prices shipped?

 

[fastLeo151]

Are these list price?

 

[Stihl Livin]

So for a used 25 you want 58 plus shipping. By the time shipping is added in I can go to the dealer and buy brand new. Seems kind of high for a used bar to me

 

[redbull660]

all this stuff was used for the creation of this thread - http://www.arboristsite.com/community/threads/bar-and-chain-craze.257934/

guess it depends on where you are. if you don't like the price kindly browse past my ad. thx.

 

[devonhubb]

I have purchased two items from Redbull660. Both were as described or better and well packed for shipment. I would not hesitate to buy from him again.

 

[mdavlee]

Pm sent

 

[gulity1]

Pm sent

 

[S Tebo]

Shipping - USPS or UPS. I do have a fedex acct as well but never used it...but can if you desire fedex service.

Payment - personal check, Money order, Paypal gift.


I'll start at the top of pic

note - there is a lot of oil on the sleeves because I did all my test cuts with full oiler and would bring multiple bars with me. So I would put an oiled up bar into the sleeve right away so not to mix up or get scratched up etc.

Stihl ES 25" Bar - 3/8 .050 3-8830 Condition: used for a few test cuts. $58

Stihl 25" RS (rapid super) 3/8 .050 Chain - Condition: used for a few of test cuts. $22

Stihl 25" RD (Rapid Duro Carbide) 3/8 .050 Chain - Condition: re sharpened with diamond wheel once. Sharper than factory ready to go. Ultra clean, looks like new. This was a personal chain and I did put it together with a few pieces from left over reels. Therefore there are a couple of places where there are two left or right cutters in a row. Not a concern, but should be mentioned. $75 I am selling only because I'm moving to .063.

Stihl 25" Wide Nose Bar - 3/8 .063 3-9831 - Condition - New. Should mention it says made in brazil. I have another and it works fine. I am only selling because I don't need two. $75 (note Stihl no longer makes the wide nose bars as of Jan 1 2014)

Stihl 25" RS ( rapid super) 3/8 .063 Chain - Condition - used for a few test cuts. $22

Stihl 25" RD ( rapid Duro carbide) 3/8 .063 chain - Condition - Used for a few test cuts - $84

Stihl 28" Bar - 3/8 .050 - 3-8838 Condition - used for a few test cuts - $65

Stihl 28" RSLH (Sq. ground half skip) 3/8 .050 Condition - used for a few test cuts - $24

Stihl 28" RS (rapid super) 3/8 .050 Condition - (3 available) (2) used for some test cuts $22 ea. (1) needs to be sharpened $20

Stihl 20" Bar - 3/8 .050 - 3-8822 3/8 .050 Condition - used for a few test cuts - $48

Stihl 20" RS (rapid super) 3/8 .050 Condition - used for a few test cuts - $20

Stihl 28" Light Bar 3/8 .063 3-2038 Condition - used for multiple test cuts - $115

Stihl 28" RD (rapid duro carbide) 3/8 .063 Chain - used for a couple of test cuts - $91

Stihl 28" RS (rapid super) 3/ .063 Chain - 2 available - used for multiple test cuts - both are close to needing to be resharpened. They were purchased new and have NOT be re sharpened yet - $20 ea

Carlton/Tsumura 28" 3/8 .063 Bar - Condition - used but taken care of. No issues at all. $75

Left side of pic 1...

Stihl 20" RD (rapid duro carbide) 3/8 .063 - used for a couple of test cuts $72

Stihl RD 3/8 .063 Chain - can make you whatever size chain you want $1 per DL - this chain was all used for a few test cuts and then taken apart. (I wanted all my tests to use brand new chain...so do a few test cuts, next test and replace with new chain)

Stihl RD replacement or back up DL's & Cutters. 3/8 .063gauge. Link of 4 DL's and 1 Left RD cutter and 1 right RD cutter - $4 ea

PM sent. Thanks, Scott