fwgsaw
don't call me i will call you!!
I would take you up on that if your serious? I could give you something for your time as well.
Vintage Chainsaw Collectors Lounge
- Thread starter Kensie1988
- Start date
Help Support Arborist Forum:
Jackofall
ArboristSite Operative
I am serious, I really don't mind... I usually ship FedEx ground and can get 30 pounds in two packages to the midwest for $30
Fill the bubble wrap with helium to make it lighter on the scales.
Steve, Samsung On5 using Tapatalk
Steve, Samsung On5 using Tapatalk
fwgsaw
don't call me i will call you!!
Let me see if I can get them bought and we can go from there.
Mac&Homelite
Addicted to ArboristSite
Well $40 later I know bought a new to me oem carb for the problematic ms361. I am not about to shell out over $100 for a new one, so I opted for a used. Hopefully it will all work out and that will be the end of the fiasco with that saw. I really hope this is the last fiasco with this carb!!!
Took the saw to school to work on, that a boy, told you, you can work on them in your room. Just take it to the bathroom when you fire it up, tellem you got a belly ache.
Steve, Samsung On5 using Tapatalk
Steve, Samsung On5 using Tapatalk
Mac&Homelite
Addicted to ArboristSite
[emoji23][emoji23] You gotcha! Don't got no time for girls, I got saws to work on guys! Naa, I could do with some more excitement here, either from girls or a job. Super boring with just school, so I applied for a grounds job today. Should do good in their saw department if I get hired as they don't know how to file a chain correctly. Got some nice saws, so I would have some fun potentially.
RandyMac
Stiff Member
fwgsaw
don't call me i will call you!!
That's a lot of boats!
Kensie1988
Vintage Saw Maniac
Anyone have a full wrap for a 272xp lying around?
Mac&Homelite
Addicted to ArboristSite
Ooh, the pangs of cad are bad. Just saw a nice clean JRed 920 on CL for $400. Want so bad, but I'm going to need a set of wheels quite soon so I have to lay off of the saws just a little.
RandyMac
Stiff Member
Have have maybe 35-40 fishing boats that actually work the water, regs being as they are, boats stay tied up.
At one time there were 60-80 going full time, Crescent City is the only harbor between Puget Sound and San Francisco that doesn't have a bar at the entrance.
During the winter storms we see boats and small ships that can't hack the sea, sometimes a fairweather gale will bring in strays.
Check this out. The Inner Boat Basin probably looked good on paper.
At one time there were 60-80 going full time, Crescent City is the only harbor between Puget Sound and San Francisco that doesn't have a bar at the entrance.
During the winter storms we see boats and small ships that can't hack the sea, sometimes a fairweather gale will bring in strays.
Check this out. The Inner Boat Basin probably looked good on paper.
Boats, boats, what boats, all I saw was a Harley Sporty. What year, model? Looks nice. Mines an 06 Custom 883.
Steve, Samsung On5 using Tapatalk
Steve, Samsung On5 using Tapatalk
What do you think we got, a saw scrap yard, laying around, that would be on a saw already.[emoji1]
Steve, Samsung On5 using Tapatalk
RandyMac
Stiff Member
2012 XL883L, a not so low Super Low.
Almost bought the Roadster but I liked the sitting position and larger fuel tank. Got the touring seat for it and shield. Factory seat has 15 miles on it, from the dealer to my house. Was like riding on a rock.
Steve, Samsung On5 using Tapatalk
Steve, Samsung On5 using Tapatalk
Haven't ridden it in two years, problems from a wreck and wife and daughters don't want me to ride any more either.
Steve, Samsung On5 using Tapatalk
Steve, Samsung On5 using Tapatalk
Mac&Homelite
Addicted to ArboristSite
I had the opportunity to purchase a Yamaha motorcycle myself this past fall from a friend. Don't remember the model, but it was a cross between a trail and a street bike. 80's 2 cycle, oil-injected was all I remember. I would have really liked it but I felt like he was asking too much for it at the time, but I get where he was coming from as it was a more unique bike. Might ask him again sometime if he still has it, perhaps we can work out a deal as it is a project bike. Hasn't run in about 20 years and was not put away for long term storage. Gas tank was very, very rusty for a start.
I hate to say this but it really ires me when people look on ebay and find a pristine example of what they have and then think that theirs is worth anything near that. I always have to invest many hours in a project, at which point I cannot usually resell and make a profit if I put a $ on my time. Ehh, we will see. Might sell some saws and get it as a project if he still has it next year, which he probably will based upon what he was looking for it.
I hate to say this but it really ires me when people look on ebay and find a pristine example of what they have and then think that theirs is worth anything near that. I always have to invest many hours in a project, at which point I cannot usually resell and make a profit if I put a $ on my time. Ehh, we will see. Might sell some saws and get it as a project if he still has it next year, which he probably will based upon what he was looking for it.
Parts for some of those old bikes are hard to come by. They may have made thousands of them but now after all these years, nla . I've got a 89 yamaha Zuma II 50cc two stroke scooter I ride around on the farm, parts are hard to come by. It's also oil injected, if it ever goes out, hello premix.
Steve, Samsung On5 using Tapatalk
Steve, Samsung On5 using Tapatalk
It needs some body parts from where a kid rode it without my permission and wrecked it, busted a lot of the plastic parts, nla, get my driffed. Those duel purpose bikes are fun with a tuned pipe though.
Steve, Samsung On5 using Tapatalk
Steve, Samsung On5 using Tapatalk
Similar threads
- Locked
