brandonstc6
Addicted to ArboristSite
Snow in Jackson, MS
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Vintage Chainsaw Collectors Lounge
- Thread starter Kensie1988
- Start date
Help Support Arborist Forum:
Man, what's that white stuff on the ground, flower truck over turn?
Steve
Steve
Looks good but don't want no part of that stuff.
Steve
Steve
Mac&Homelite
Addicted to ArboristSite
Hey, more snow than we have gotten over at school in SD or at home.
happysaws
Addicted to ArboristSite
Do any of you know of an epoxy or similar product (something similar to JB Weld) that will withstand chainsaw exhaust temperatures, say around 800°F or so?
JB Weld only works up to 550°F...
JB Weld only works up to 550°F...
happysaws
Addicted to ArboristSite
Found some,
JB Weld Extreme Heat works up to 2400°F.
Fixing a case?
Steve
Steve
Hi Steve
I could use some info that you might be able to supply...
I have a 2001 GMC 3500 Dually that has a Wrecker deck on it.Someone has done a real crap job of the wiring and my next project is to clean it up.Would you have a breakdown as to what each color of wire is supposed to do in the original wiring harness.One issue now is the right turn signal stops when to step on the brake,but i am sure that the issue is in all the crap that has been done and scabbed together.
I hate crappy wiring,do it right once and forget it.
Thanks Thomas
It's been a while since I did any electrical troubleshooting but one of these diagrams may help. https://www.google.com/search?safe=...hWkg-AKHfRuBI4QBQg8KAA&biw=1280&bih=669&dpr=1
happysaws
Addicted to ArboristSite
No.
"Muffler mod" on a one-piece cast exhaust manifold
LonestarStihl
Addicted to ArboristSite
Howdy gents. Hope all is well. Nothing good to report saw wise. Been having bad report on a lot of my old saws. It’s a nightmare
Mac&Homelite
Addicted to ArboristSite
Nothing too new in my area either. More parts ordered for various saws. Should have a working Homelite 350 and ez chainsaw by the time break is over. Do have some larger suprises to show coming up so stay tuned.
Working on a homelite super xl auto, no spark. Believe coil has crapped out. Had electronic ignition, any one have or know the resistance on these. Pull kill wire, remove plug wire from coil and clipped the end off and installed it back in, still no spark.
Steve
Steve
brandonstc6
Addicted to ArboristSite
The brown truck brought me a present today. I am kinda disappointed about the broken clutch cover and missing lower handle. On a good note, the compression is not low. It checked low because the compression release was in
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
brandonstc6
Addicted to ArboristSite
Sent from my iPhone using Tapatalk
Mac&Homelite
Addicted to ArboristSite
You know the drill, pictures or it didn't happen...
Mac&Homelite
Addicted to ArboristSite
lol, spoke too soon. Needs a full wrap handlebar right off the bat. Also, let me know what you decide to do about those plastic sawdust covers for the starter cover. My PM 10-10 is missing them and I have yet to figure out what to do about it. If I had one of the covers I would make a CAD drawing and have it 3d printed.
LonestarStihl
Addicted to ArboristSite
You can occasionally find them but it’s no small task
Kensie1988
Vintage Saw Maniac
Yea me and Lonestar had had a crappy saw week, everything I touched this week seemed to break on me, and then i just kept finding issues wirh stuff. Needless to say ir sucked, but no nearly as bad as Lonestar. And I didnt get snow, boo!
On a good not I got this 181se off ebay, i cant believe someone didnt buy it before me, it was a smoking good deal, 18 people were watching it and after almost a week i could stand it anymore.
On a good not I got this 181se off ebay, i cant believe someone didnt buy it before me, it was a smoking good deal, 18 people were watching it and after almost a week i could stand it anymore.
happysaws
Addicted to ArboristSite
What's considered a "smoking good deal"???
[emoji16]
Nice saw BTW!
[emoji16]
Nice saw BTW!
