wanted husky 55 air injection parts

[jughead500]

like the title says.i'm needing all of the parts for a 55 husky air injection.from the AI tube bulkhead,filter,hardware etc.im actualy needing the bulkhead and filter with the hold down screw in the center to hold the filter on.i have the pop on filter but it keeps popping loose letting dust get into my intake.my bulkhead is stripped and its letting air get in past the back of the carb leaning out my mix and scoring my cylinder.I could also use a baffle out of a 51 or 55 muffler too.post here and let me know what you have and how much your looking for.any help will be greatly apprieciated.I'll be doing a tear down tomorrow evening to clean up my cylinder and may post back needing some other things

 

[blsnelling]

Many parts are still available for these saws from Husqvarna. I just ordered the parts to go through a second one.

 

[rattler362]

Let me go out and see what I got but I don't believe I got the intake mine I think is the snap on type. would that work for you?

I have the back part of the intake that the boot goes on and I don't like the look of it but you are welcome to it if you want it it can be fixed if you want it.

 

[outdoortype]

51/55 parts

I have some 51/55 air injection parts but no filter. I have the bulkhead fitting that goes between the carb and intake boot, intake boots, impulse gasket as well as oil pump and other stuff you probably don't need. I traded my 51 and no longer need these parts. I'll see if I can post a picture.View attachment 311893

 

[jughead500]

I have some 51/55 air injection parts but no filter. I have the bulkhead fitting that goes between the carb and intake boot, intake boots, impulse gasket as well as oil pump and other stuff you probably don't need. I traded my 51 and no longer need these parts. I'll see if I can post a picture.View attachment 311893

How much you want for that stuff?

Located everything I need to convert my 55 to air injection.All of it was used.Keeping my fingers crossed that nothings broke.

 

[outdoortype]

How much you want for that stuff?

Located everything I need to convert my 55 to air injection.All of it was used.Keeping my fingers crossed that nothings broke.

how about $15+ shipping?

 

[jughead500]

how about $15+ shipping?

Sounds good.I'll pm you in a lil while