Wanted

[dozerdan]

Hi
I need an ignition module for a Dolmar 9000,air filter cover and top cover. I will buy a parts saw if you have one.
I also need an air filter cover for a Dolmar 153.
I need a good crankshaft for a Husky 3120.
Later
Dan

 

[Jacob J.]

Dan- I'll try to get you these Dolmar 9000 parts also. thanks.

 

[Bill G]

Dan,

Did you ever find a TIG ?

Bill

 

[dozerdan]

Hi Bill
I did purchase a 300 amp Lincoln.
Thanks for asking.
Later
Dan

 

[Sethro]

Hello Dan
I have a Dolmar 9000 complete parts saw(scorched piston) here if you still are in need. Seth
[email protected]

 

[Jacob J.]

Hey Seth-

Dan may be trading his Dolmar to me for another saw, so I'd like to buy that parts saw if possible. I'll e-mail. thanks, JJ

 

[dozerdan]

Hi Seth
Thanks for thinking about me and offering me the saw. I did trade that saw to JJ. Maybe you can work out a deal with him.
Later
Dan

 

[Sethro]

You guys been swapin saws ah.
JJ You any rollernose bars (big Husky mount),I could use a 181 ring.JJ one other question.Do you have a Barshop.I bought some hardnose bars from bailys and would like to retrofit some rollernoses.Thanks Seth

 

[Jacob J.]

Hey Seth-

An older friend of mine "Timberland Enterprises" has done many conversions on the hardnose bars to fit both external and three-rivet tips. If you want to ship those bars to me, I'll take them to him and have him convert them. I have some rollernose tips here, to put on them if you like, they're not brand new tips but good used ones that are still tight. Yes, I have many, many large Husky, McCulloch, and Homelight bars- probably over 100 or so that are external roller nose. I might not have anything shorter than a 28", how long do you need?

I have one thin-ring 181 piston if you need it and 5 rings for it. Let me know what else you need and I can probably get it. Thanks, JJ

 

[Sethro]

JJ
Lets make a deal. the hardnose bars I have are.050 gauge 16".Do you have the I think they are 2 1/2"(.050&.058) rollernoses 3 rivet tip? What will he charge you for the conversions? I also would like the 181 piston and rings.I will ship the bars and PS9000. Just let me know. Thanks Seth

I have some of the smaller tips here also.

 

[Jacob J.]

Seth-

Don't worry about sending tips, I have bucketloads of those small roller noses- We were throwing those away a few years ago and converting the small roller nose bars over to the small Windsor three-rivet tip. We couldn't sell those roller nose bars to anyone. I kept a small box of about 50 tips. My buddy will convert them and I'll cover the cost.

I may have an additional good used 181 cylinder I can ship also, I'll look around for it. I'll send you an e-mail with the details. Thanks, JJ

 

[Sethro]

JJ

I will ship the bars Tuesday.Thanks Seth

 

[z4lunch]

Hey Seth,
Steve here... The 2.5" roller noses with the three rivets are .050 rail.

 

[Sethro]

Hello Steve
thanks,I talked to Ken it sounds like your 088 is runing real strong now.I also see you finding quit a few tronics latly. Seth

 

[z4lunch]

Did you Tronics

Seth,
Steve here...
Yep the 088 seems pretty happy. Just got dunn working on a loop of chain. i got a roll of Carlton from Jeff S.

 

[Sethro]

Hello Steve
Cool.What did you get A1 or A3? And how much$$$? Seth

 

[z4lunch]

Seth,
Steve here... I bought A3, it was $65.00 to the door, for 25 feet

 

[mryb]

Seth & J.J.,
Lambert had expressed interest in roller tips about a year or so ago. You might wanna check with him to see if he is still interested...Rick/Saw Slut

 

[Sethro]

HI Steve
Is that chain Angie's Xmas present?
Rick
Lambert's a scam artist,he's got my 7900KD and refuses to send it to the rightful owner. Seth

 

[Jacob J.]

lol, that sounds like him. You guys can have as many of these roller tips as you want- I've been giving them to high school kids to weld into decorations in ther metal shop classes.