Webbing strap handles for firewood

[farmerdoug]

Anyone know a good source for webbing straps for firewood. Everything I see is overkill:

Welcome to Industrial Webbing Corp.

 

[farmerdoug]

firewood handles

I talked to a large bundling company. If a handle breaks loose and falls on the customer's foot, then there is a potential liability, so they don't do handles. I think this is my conclusion as well.

 

[farmerdoug]

This is probably the way to go

POLYPROPOLINE WEBBING 1" X 9" HOT CUT WILL NOT UNRAVEL PACKED IN BAGS OF 1000
.06 EACH $60.00 A THOUSAND. DISCOUNT OF ORDERS OVER 10,000

I TRY TO KEEP RED, YELLOW, SKY BLUE ,ROYLE BLUE AND GOLD IN STOCK FOR QUICK DELIVERY. ALL OTHER COLORS CAN BE DELIVERED IN TWO WEEKS OR LESS. IF YOU WOULD LIKE TO PLACE AN ORDER PLEASE GIVE TWISTER A CALL OR SEND AN EMAIL. THANK YOU / CHUCK SHEELY
use a pnumatic crown stapler( Campbell Hosfield, Stanly Bostich, Shop Tool) to
Attach the handles with 4 ----- 1/4" x 3/4" or 1/4 x 5/8" staples 2 on each end 1 to hold it and 1 to insure no one claimes the staple pulled out and the bundle landed on my toe.

TWISTER INDUSTRIES
PH. (320)-679-9835
Fax (320)-679-9835
Cell. (612)-390-9620

TWISTER INDUSTRIES
2266 HWY. 65
MORA, MN. 55051

 

[TMFARM 2009]

why the handle? just shrink wrap it and sell it..why re invent the wheel? have we as a society dropped to a level that we won't buy a product if it has no handle?????????
test some with your handles and some with out handles and see if it is worth the extra $$$$
just my 2 cents

 

[arlen]

Poly rope

Hey I put handles on my bundles. I use a hot knife and a big roll of yellow poly rope from Harbor Freight. I also got my air stapler from Harbor freight. I use a one inch staple green box quantity 5000. I also put two each into each end I sit down at a table with the hot knife warmed up and make one to two hundred handles and leave them in a plastic bucket until I need them. It is kind of a mindless job sit down crank up the radio pull out a few yards of rope and start cutting. I cut mine about 12" The melted ends will not unravel. People like a handle to carry the wood.

 

[farmerdoug]

rope size

Hey I put handles on my bundles. I use a hot knife and a big roll of yellow poly rope from Harbor Freight. I also got my air stapler from Harbor freight. I use a one inch staple green box quantity 5000. I also put two each into each end I sit down at a table with the hot knife warmed up and make one to two hundred handles and leave them in a plastic bucket until I need them. It is kind of a mindless job sit down crank up the radio pull out a few yards of rope and start cutting. I cut mine about 12" The melted ends will not unravel. People like a handle to carry the wood.

Search results for: 'rope'

Do you get 600' of the 1/4" rope?

 

[fffrosty72]

Do you have a factory that makes this stuff in MN?

 

[Helene]

Webbing strap for firewood

Webbing and Custom Manufacturer - ACW - American Cord and Webbing

Since 1917, American Cord & Webbing has been a U.S. manufacturer of narrow textiles
ACW offers both standard and fused (heat-sealed) cuts of webbing.

ACW
88 Century Drive
Woonsocket R.I. 02818
401 762-5500 extension 104

 

[Dhillinmkewi]

Just thought I'd bump this topic and draw your attention to FirewoodHandles.com
Ken sponsors the Arboristsite website, has posted videos or how he has mass produced nearly 3 million firewood handles since 2008.
Worth checking out!