well i had nothing better too do

[Rudolf73]

was gunna SELL IT AND BUY A 461 but one of them would have to have a lot more touqe than a 660 for
me to do it .
i cant beleve what it will cut for a tank it is about 25% better on fuel than me stock 460 was

Yeah I don't think there would be much difference between your ported 460 and a ported 461. Except for the new jug and crankcase almost everything else is the same on those saws.

 

[Stihlman441]

well on the redgum again today i'm gunna have to get a mill one day all solid

lucky i looked at me hat today before i put it on don't need one of these running down the back of me neck
making me think it's something dangerous LOL

Another good reason not to wear stack hats wright there.:msp_rolleyes:

 

[deye223]

i am looking for another big piece to run the 390 and the 460 with the 32" sugi and see what gives
and i think i found it i will see if i can drop this it's about 40"dbh hope it's solid

well its down the vids are uploading (if you can call it that)

 

[Rudolf73]

Was that 460 strong enough to pull a decent bar Darren... :msp_biggrin:

 

[MCW]

well its down the vids are uploading (if you can call it that)

Hurricane Sandy?

 

[deye223]

Was that 460 strong enough to pull a decent bar Darren... :msp_biggrin:

well you tell me rudi i'm more than HAPPY, i will up load the rest when the kids get off the net

[video=youtube;OMtthQ1jmd0]http://www.youtube.com/watch?v=OMtthQ1jmd0&feature=plcp[/video]

 

[Rudolf73]

Sounds like a 660 on a 32" bar :msp_wink:

 

[deye223]

yeah it go's well but don't look at the stump and me cuts that is the worst job i have done in over a year
not happy with that part of the day but the rest was great

cheers D

 

[deye223]

well i did a comparison with the 390 and 460 think it's about 2.5 to 3 seconds so in that size wood
as far as i'm concerned there pretty much the same .
except the 460 has better fuel economy a fact i find hard to believe it even use's les than me stock 460 did
well here are the vids think the log is about28" 29"

[video=youtube;8Zc7F0FTGrA]http://www.youtube.com/watch?v=8Zc7F0FTGrA&feature=plcp[/video]

 

[deye223]

[video=youtube;ILx6hfUZVi0]http://www.youtube.com/watch?v=ILx6hfUZVi0&feature=plcp[/video]

i apologise for the quality as i was losing light

 

[Mastermind]

Was that 460 strong enough to pull a decent bar Darren... :msp_biggrin:

well i did a comparison with the 390 and 460 think it's about 2.5 to 3 seconds so in that size wood
as far as i'm concerned there pretty much the same .
except the 460 has better fuel economy a fact i find hard to believe it even use's les than me stock 460 did
well here are the vids think the log is about28" 29"

I would bet that the 390 has quite a bit more intake timing than the 460. If I remember right you had a popup done in the 390 after it was ported.....that would gain you a couple more degrees of intake, lower the exhaust and transfers a bit and add some torque.

Too much intake doesn't really hurt performance.......but it really puts a dent in fuel economy.

 

[deye223]

gday randy matt had that done , you excelled ya self on this saw this wood is a fair bit harder than oak
to be honest i though it would struggle with a 32" bar but as you can see it ain't no problem at all
a big thanks again you have restored my faith in the best saw built (for my application) spose i should check
the comp hot and see what it is

cheers D

 

[Stihlman441]

Looks good Darren.
The way ya dog was straight over to that tree when it hit the ground im thinking he likes possums ?.

 

[deye223]

Looks good Darren.
The way ya dog was straight over to that tree when it hit the ground im thinking he likes possums ?.

you got that right i reckon he'd make a good coon dog too (in the US :msp_wink

 

[splitpost]

you got that right i reckon he'd make a good coon dog too (in the US :msp_wink

they dont like dogs ,that i know for sure

 

[Mastermind]

they dont like dogs ,that i know for sure

Who don't like dogs? :msp_sneaky:

 

[deye223]

they dont like dogs ,that i know for sure

which one the possum or the racCOON :msp_smile:

 

[MCW]

Who don't like dogs? :msp_sneaky:

Native Australians Dogs tend not to like them either...

 

[splitpost]

Native Australians Dogs tend not to like them either...

thats what i'm talking about,
the olds had a servo/roadhouse years ago ,i can remember getting woke up late one night by someone screaming in pain,turned out to be a native fella that broke into the compound behind the servo,on his way out our rotty nailed him just before he got back over the fence,at the time i was living in a caravan out the back,when i saw what was going on i went back to bed knowing the dog was ok,he had old mate by the arse/thigh ,next morning i checked things over only to find nothing missing and some blood on the fence,funny how nothing ever came of that.months later i shared a house with some mates only to get a call at work saying my dog was crook and dieing,by the time i got home he was gone,pretty sure he was baited,there was alot of that going on, was it payback,who knows,RIP Bundy .

 

[deye223]

thats what i'm talking about,
the olds had a servo/roadhouse years ago ,i can remember getting woke up late one night by someone screaming in pain,turned out to be a native fella that broke into the compound behind the servo,on his way out our rotty nailed him just before he got back over the fence,at the time i was living in a caravan out the back,when i saw what was going on i went back to bed knowing the dog was ok,he had old mate by the arse/thigh ,next morning i checked things over only to find nothing missing and some blood on the fence,funny how nothing ever came of that.months later i shared a house with some mates only to get a call at work saying my dog was crook and dieing,by the time i got home he was gone,pretty sure he was baited,there was alot of that going on, was it payback,who knows,RIP Bundy .

i bet he had to lick his arse to get the taste out of his mouth :bad_smelly: poor doog