whadja do today?

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Put new brake asembles and drums on my flat bed trailer. Everything was a super huge pain in the ass. Some of the backing plate bolts wouldn't come apart, 2 grease guns not working, then I had a wheel seal spring pop out when I went to put the drum on. Fml

That's why I never got a big trailer. I have done a few brake jobs on them and do have to say that for such a simple set up it really is a pain to get dialed in and there was always some completely rusted item that either had to be cut, drilled tapped or beaten with a hammer.
 
I had gone to get the loader so I could run it through a day before I laid the yen down. But now is has to go back to the shop because they put the belt on so its their baby.

I sure am getting a good bit of bigger sticks lined up plus all the poles I have standing.
 
I had gone to get the loader so I could run it through a day before I laid the yen down. But now is has to go back to the shop because they put the belt on so its their baby.

I sure am getting a good bit of bigger sticks lined up plus all the poles I have standing.
You want me to bring the dingo down for a day?
 
Yo Jared! Come back, I was only joking.

I am thinking of going to swimming today. You know, real swimming. Find a rope swing or cliff.

I dropped my kid off at the Y, maybe I will just go there and work on my tan but I have had a vision of being baptized in a dark vat of cold water under a sweltering desert sun and being reborn anew. I think I need to follow it.
 
Is that because a company needs special certs to deal with alb as opposed to eab?
not sure but likely as there are no clear cuts with eab like there are mandatory clear cuts with alb all associated with the Feds. They tried it with eab and it didn't work but it is working with alb and with such a large project they go with large contractors instead of messing around with guys like you and me multiple times.
 
00606_1mAymZB2rl3_600x450.jpg



Well this puppy is still for sale. Down to 6k from 7500, its been on CL forever but I like it.

Turns out the belt was being rubbed by the guard. If me or you put the belt on and had that happen we would just adjust the guard and run the machine. Supposedly it will be fixed by tomorrow so that means test day hopefully is Weds where I am going to turn it on in the morning and shut it off at night.
 
Go jump off that rock face with dakota.

Sounds about right... and that boy needs a bath anyway!

I had to leave him and all the rest up there with that crazy old hippy lady.

Took the family out to breakfast on Sunday, ran into one of them, he gave me a hug! I was like, " now now, settle down, its to early to be that stoned."
 
00606_1mAymZB2rl3_600x450.jpg



Well this puppy is still for sale. Down to 6k from 7500, its been on CL forever but I like it.

Turns out the belt was being rubbed by the guard. If me or you put the belt on and had that happen we would just adjust the guard and run the machine. Supposedly it will be fixed by tomorrow so that means test day hopefully is Weds where I am going to turn it on in the morning and shut it off at night.


Looks about he same size as my dads. Was thinking about buying it from him when he sells his place but it has no lift capacity at all!
 
Back
Top