What are the most valuable collector saws?

[Chainsaw Collectors]

Here’s a rare one, my corded Shindaiwa 110.

 

[Yukon Stihl]

View attachment 1165336turbomatic chainsaw not many are known. Fluid drive chainsaw with heated handle from exhaust.

I am lucky enough that one of those found me.

 

[fwgsaw]

@fwgsaw Have you ever seen a Mozwood?

Never had a Mozwood in my collection. I believe they were very similar in design to a lamb sw-7 model. The mozwood A7 is the only model I can recall.

 

[fwgsaw]

I am lucky enough that one of those found me.

I know of 8 counting yours.

 

[fwgsaw]

Jonsereds xa
Most know these as diesel chainsaws even though they are technically not a diesel engine. This was one of Jonsereds 1st offerings in the chainsaw market. Propane in the handle bar was used for heating a hot bulb for starting the all fuel engine.

 

[Jay Hansen]

Jonsereds xa
Most know these as diesel chainsaws even though they are technically not a diesel engine. This was one of Jonsereds 1st offerings in the chainsaw market. Propane in the handle bar was used for heating a hot bulb for starting the all fuel engine. View attachment 1165504

Floyd, that's absolutely gorgeous!!

 

[fwgsaw]

Jonsereds xc Serial 019
Test saw for the north American market 1955. This saw closely resembles the Jonsereds xa but differs quite a bit as it uses d cell batteries to preheat the hot bulb engine for starting. Pictures below show the saw with original crate and special starting instructions to go with as the xa manual didn't show the battery operation. Some say only 35 of these were manufactured.

 

[Bill G]

There are VERY few XC saws around

 

[fwgsaw]

Jonsereds xc Serial 006
This particular xc was found with period correct leak proof batteries still in the saw.

 

[snobdds]

Very nice stuff, top notch.

 

[Bill G]

That rivals anything Marshall or Wayne has.

 

[fwgsaw]

That rivals anything Marshall or Wayne has.

Oh I wouldn't say that having personally seen both of their collections more than once.

 

[fwgsaw]

Burnett b6
Design was bought from Shade engineering and built and sold by Dick Burnett Vancouver B.C the b6 was the predecessor to the Burnett C and was 125cc villers engine from England.

 

[fwgsaw]

Nos never fueled 090g with factory wax mark still on the muffler. Not necessarily a rare saw but thought some might like to see this. This saw originally came from Australia to a stateside collection years ago.

 

[Bill G]

Oh I wouldn't say that having personally seen both of their collections more than once.

I was just speaking to the XC

 

[Bill G]

One of these evenings you and I need to get on the phone again a jaw about saws and farming. I hope that 3pt Deere planter worked out for you. We do not see many here

 

[av8or3]

Wow, nice bunch of saws. Do you know if the cyl is 66 or 58mm on the 090G? I’m betting on 58mm, but it would be very interesting if it was 66mm.

 

[Bill G]

Wow, nice bunch of saws. Do you know if the cyl is 66 or 58mm on the 090G? I’m betting on 58mm, but it would be very interesting if it was 66mm.

I have had some with 66 but they sure were not NOS

 

[Sidecarflip]

Jonsereds xa
Most know these as diesel chainsaws even though they are technically not a diesel engine. This was one of Jonsereds 1st offerings in the chainsaw market. Propane in the handle bar was used for heating a hot bulb for starting the all fuel engine. View attachment 1165504

Nice....

 

[Sidecarflip]

Nos never fueled 090g with factory wax mark still on the muffler. Not necessarily a rare saw but thought some might like to see this. This saw originally came from Australia to a stateside collection years ago. View attachment 1165716View attachment 1165717

Nice, I have one as well but mine has had some use. It's an MX bike with a handle... lol