When you need 10 more let me knowWhen I will start putting it together I will keep you posted
What's on your bench
- Thread starter chainsaw _ crazy
- Start date
Help Support Arborist Forum:
Finally got time to ready used saws for sale. 362, 2 361s, 066. Waiting for 461 piston and cylinder and another 361 piston. Go over the 270 for the shop. Debating on a 441. And finally got 500is and 400s in.
I picked up these from an old timer who was “tired of tripping on these damn saws”. 2 041s, 266SE and a Shindaiwa 680. Willing to bet some fresh fuel and they will pop. All are nice and tight.
you suck….
^^^^^^ What he said^^^^^^^ LOL
Wiseco isnt any wear near the class of piston as wossner and cp wiseco also known for tolerances floating all over the place.
Though that could be a good thing if you measure bore. Order a handfull of wiseco measure pistons and keep a pair that best fit that bore.
Though that could be a good thing if you measure bore. Order a handfull of wiseco measure pistons and keep a pair that best fit that bore.
Hopefully never, as I don't want a 4 stroke chainsaw!! The piston Huskstihl put in my 372 was a quality piece so good ones are out there. Cj
I said id never ride a 4 stroke. Apparently that changed I now ride a 22 kx450 and well I got used to it, came off old kx250s from the 2000s.
For what its worth I realy dont think saw quality is that great. Oem to wiseco dominant or whatever its called
Tolerances loose ports rough unfinished. saws all around lack of care put into them. Just enough to yank money from our wallets
Then hobbyiest compete to buy same saws that others use to make a living further decreases quality.
**** were talking pistons
For what its worth I realy dont think saw quality is that great. Oem to wiseco dominant or whatever its called
Tolerances loose ports rough unfinished. saws all around lack of care put into them. Just enough to yank money from our wallets
Then hobbyiest compete to buy same saws that others use to make a living further decreases quality.
**** were talking pistons
Hows that make out at 14,000
link
Gone fishing
Gotta love that, thats some money consuming gear you got there I guess...
Notice the piston description almost always say for "Racing". Would you need it for a daily driver? No. Could it be bad ass and impressive with the proper matching machine work worth bragging rights? Maybe. Cost worth it to most firewood cutters? Probably not!
This has been on my “bench” for 3 days. Waiting for parts, trouble shooting. Started off with no start from cab, traced to a blown fuse. Next starter solenoid clicking, bendix froze. New starter in, no power to starter! Bad solenoid from battery. Also had to clean carb to get it to recoil start. Get it running from recoil, conveyor stuck, that’s freed, now back to installing new solenoid, a couple wires and terminals. The plow wanted to join the fun so I had to order a new valve. Can’t really complain, plow is 20 years old as is the salter and this is the most I’ve done to them in the 10 years I’ve been here.
A piston is a 4st dirt bike is basically a ring holder at best. Heck that is about the same as the diamond pistons in my big block, expensive ring holders! I quit riding 4 stroke dirt bikes 2 years ago, I was faster on them but didn't have as much fun. Back on 250 2 strokes. Cj
my Husqvarna 125cc piston and cylinder. just for fun.
new project.
Sierra_rider
Piss revver
Cleaning the new-to-me Jet mill/drill. The previous owner used it as an overpriced drill press and it was full of wood shavings. It's otherwise in decent shape and I only paid $250 for it, easily the best deal I've ever gotten on a tool.
sweet. that will get it done. I have a big ass gearhead mill. looks like you have a nice lathe to go with it.
