Will a 44DL chain work on my 45DL bar?

[HansFranz]

I have this 12" bar on my Dolmar 3410TH tree saw:

https://www.oregonproducts.com/en/single-rivet-guide-bar,-12"/p/120sdea041
Today I noticed some saw chains on clearance at Walmart and took a chance on two TriLink 12" chains for $9.50 with these specs:
3/8" LP .050" gauge 44DL

Is there any chance these chains will work on my 45DL bar...maybe if I adjust the bar real far back? Or am I S.O.L. and need to return the chains for refund?

Thanks for any help.

 

[Wood Doctor]

It might fit but lots of variables are involved, such as bar wear and the chain tensioner. I know you do not want to open one of them. but I would to see if it fits. You can return the other one if it does not. It's worth $5 or so to find out. Be prepared to accept the fact that it will be a hair too tight to load on.

 

[Franny K]

probably will work. I did that for my Husqvarna battery saw. 44 is Stihl, 45 is brand x. Twist on the clutch drum if it is close to forcing it's way on.

 

[Dennisthemenace]

You have probably bought yourself a heap of annoyance to save a couple of bucks

 

[HansFranz]

You have probably bought yourself a heap of annoyance to save a couple of bucks

I have a special talent for that!