secureland
ArboristSite Operative
HomeMade SawBuck for Branches
Made with No Nails, Fasteners,or Milled Lumber. just a Chainsaw and a Sledge
This Design holds 1000s of Pounds (alot of branches)
This is a Good Way to cut your small branches/pole wood. I can hang on the extende 45 degree cross pieces!
Expect a Max. 2" Variance on the length of piece when cutting bent multibranched pieces, but generally lengths are witin 1" Accuracy.
The Pieces driven into the ground that hold the logs on the ground are crucial.
Wear a face-mask!
The long 45 degree cross pieces hold the wood up off of the horizontal piece leaving a gap so that you don't cut into it. This could be Designed for poles as long as you want.
Made with No Nails, Fasteners,or Milled Lumber. just a Chainsaw and a Sledge
This Design holds 1000s of Pounds (alot of branches)
This is a Good Way to cut your small branches/pole wood. I can hang on the extende 45 degree cross pieces!
Expect a Max. 2" Variance on the length of piece when cutting bent multibranched pieces, but generally lengths are witin 1" Accuracy.
The Pieces driven into the ground that hold the logs on the ground are crucial.
Wear a face-mask!
The long 45 degree cross pieces hold the wood up off of the horizontal piece leaving a gap so that you don't cut into it. This could be Designed for poles as long as you want.
Last edited:
