Mastermind worksaw's picture thread

[Mastermind]

Randy,
this vintage axe hobby has become as strong as CAD.

We need pictures my friend.

 

[Fire8]

Dug four Axe heads metal detecting Thursday gave them away wasn't that old early 1930's maybe does that count Steven for axe CAD

 

[bryanr2]

Dug four Axe heads metal detecting Thursday gave them away wasn't that old early 1930's maybe does that count Steven for axe CAD

should'a sent them to me.

 

[bryanr2]

I didnt realize how expensive these buggers can get.
http://www.ebay.com/itm/271774095019?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT

http://www.ebay.com/itm/Vintage-Emb...6&pid=100005&rk=4&rkt=6&sd=271774095019&rt=nc

 

[Trx250r180]

Randy, I warmed the saw up ,i think the oil on the rings being cold gave it the more compresion ,closer to the 210 you were thinking after warmed up .

Did not realize a customer heard me piss revving and throttle blipping ,he did comment the saw sounded like it ran pretty good though .

 

[Fire8]

should'a sent them to me.

Mite do that next time

 

[hseII]

Randy, I warmed the saw up ,i think the oil on the rings being cold gave it the more compresion ,closer to the 210 you were thinking after warmed up .
View attachment 404172

I only got 190 on mine
.
.
.
.
.
.
.
.

 

[Trx250r180]

I only got 190 on mineView attachment 404173
.
.
.
.
.
.
.
.

I have never checked my 660 ,190 is real good on that size bore ,i do know bolted to the mill if it pops while the pull cord is in the hand ,it rips it out of your fingers ,so that must be enough i guess

 

[Fire8]

Steven I usually don't dig iron unless I'm at a location that dates back to the 1800's or earler that's why I found 4 which were newer then I was looking for ill try to send you a couple next time but you will need to electrolysis them and coat them they look good after that

Mite do that next time

 

[bryanr2]

awesome

 

[Mastermind]

MS461 day here.....

 

[Fire8]

Steven here's my best axe

 

[KG441c]

I like dem 461s!

 

[Knobby57]

Those mastermind 461s are like a bar room brawler compared to the mastermind 441c that guy is more a civilized martini drinker


Sent from my iPhone using Tapatalk

 

[DexterDay]

MS461 day here.....

View attachment 404213

I recognize that one on the left!!

That XP sticker makes it go faster!!

 

[Mastermind]

Standing at the lathe cutting squish band after squish band..........

 

[hseII]

Standing at the lathe cutting squish band after squish band..........

My Sorry

 

[Grey]

Mastermind Work Saws rollin' on 20's
MS461, 20", 3/8, 50
MS261cm, 20", 0.325, 63
Serious rippers.

And here's a gratuitous picture of the MS461 w/ 32" b&c pre-porting. FWIW, it actually pulled 33RS105 O.K. and 33RSF105 real nice before porting! I haven't gotten into any really big wood since porting, but I'm looking forward to it.

←
43​

44​

45​

46​

47​

48​

​

 

[showrguy]

MS 461cm ???

Allright Randy, You got some splainin to do !!

 

[Mastermind]

I didn't do nuttin.