357xpgw
- Thread starter SWE#Kipp
- Start date
Help Support Arborist Forum:
Four Paws
Addicted to ArboristSite
Thought this handle for the 357xp would be of interest for full wrap lovers
there is also a set of new dawgs for it as well, bigger and for both in/outside ,,
Very nice saw. Seems kind of small to sport a wrap handle...what I mean is, usually wrap handles are used on falling saws - bigger saws than the 357. Might be pretty good if all you are cutting is firewood with an 18"-20" bar.
GASoline71
Mr. Nice Guy
WHO CARES WHAT SAW ANYBODY PUTS A WRAP HANDLE ON!!!
Maybe YOU would not put a wrap handle on that size of saw... but apparently Kris wanted one on there so he put one on.
Nice saw Kris.
Gary
Maybe YOU would not put a wrap handle on that size of saw... but apparently Kris wanted one on there so he put one on.
Nice saw Kris.
Gary
B_Turner
Addicted to ArboristSite
Nice saw. For me the main disadvantage of full wrap on huskies is that since the lowerst bar crosses below the chip stream, it is severely constricted right at the bar and chaincatcher for noodles. Not a problem with chips.
I like the way my 066 full wrap doesn't cross below at all. I supposed if an elephant sat on it I would have wished it crossed below like the Huskies to be more rigid. So far no elephant problems....
I like the way my 066 full wrap doesn't cross below at all. I supposed if an elephant sat on it I would have wished it crossed below like the Huskies to be more rigid. So far no elephant problems....
J.Walker
Addicted to ArboristSite
- Joined
- Aug 20, 2006
- Messages
- 3,570
- Reaction score
- 1,772
- Location
- The Bristol Mountains, Western N.Y.
Thought this handle for the 357xp would be of interest for full wrap lovers
there is also a set of new dawgs for it as well, bigger and for both in/outside ,,
Kipp
Could you post a picture of the dawgs. I would like to put a second dawg on my 357 but the design prevents doing so.
Thanks
J.Walker
MAG58
ArboristSite Guru
Thought this handle for the 357xp would be of interest for full wrap lovers
there is also a set of new dawgs for it as well, bigger and for both in/outside ,,
Nice
I'v been thinking about full warp for this size of saw's, I would like one on my Jred 2159 cos sometime I have been missing full warp handle when I use the 2159.
ChuckinOhio
ArboristSite Guru
- Joined
- Feb 9, 2007
- Messages
- 640
- Reaction score
- 178
Mag,
That there is whats commonly called a Steep Azz Hill in these parts, I don't envy you having to cut in a locale like that.
Kipp,
Where is the on off switch for the handle heater on that saw?
Chuck
That there is whats commonly called a Steep Azz Hill in these parts, I don't envy you having to cut in a locale like that.
Kipp,
Where is the on off switch for the handle heater on that saw?
Chuck
Tzed250
Addicted to ArboristSite
That is a really nice looking saw! Is the "New Edition" sticker on there because of the full-wrap setup?
blis
Addicted to ArboristSite
on same spot as on normal wrap, aka on the plastic piece on right hand side of wrap...
ChuckinOhio
ArboristSite Guru
- Joined
- Feb 9, 2007
- Messages
- 640
- Reaction score
- 178
I thought that may have been it, but my experience with a G model is absolutely zero.....
Chuck
Chuck
J.Walker
Addicted to ArboristSite
- Joined
- Aug 20, 2006
- Messages
- 3,570
- Reaction score
- 1,772
- Location
- The Bristol Mountains, Western N.Y.
dawgs
Thank you SWE#kipp
I have been looking for a double dawg setup for my 357. Maybe soon I can order them from my local dealer.
So how much does that saw sell for over in Sweden? I hear prices are high.
Thanks
J.Walker
Thank you SWE#kipp
I have been looking for a double dawg setup for my 357. Maybe soon I can order them from my local dealer.
So how much does that saw sell for over in Sweden? I hear prices are high.
Thanks
J.Walker
- Joined
- Apr 3, 2002
- Messages
- 6,084
- Reaction score
- 631
Real nice saw!!!
