husky

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. Trophyelk6x6

    Want to Sell 2100 and 395 Husky's for sale

    Mint 2100 for sale, I've owned 15-20 of these and this is the nicest original thin ringed saw with original stickers, muffler, paint etc. Has working chain brake with original sticker on that. This saw sat in a garage since new and I would guess it hasn't had that many tanks ran thru it. A...
  2. Trophyelk6x6

    Want to Sell Husqvarna 281 and mint 61 for sale

    super strong 281 husky for sale with nice parts saw 181se, top end looks great on the 181. Also a near mint 61 for sale. I will cover shipping anywhere in USA. 281 with parts saw shipped for 325.00 The mint 61 shipped costs 275.00 Thanks Mike Belfair WA
  3. FLchainsawJoe

    Sold *Pics added* NIB Jred CS2188 $800 or Trade

    Making room for new toy. Brand new. Only opened box to inspect. Asking $850 plus shipping. PayPal please.
  4. wash-climber

    Want to Buy Top handle chainsaw, Husky, Stihl, Echo. $300

    I'm looking for a top handle saw. My budget is around $300. My boss runs 193s, but I'm not loyal to a brand yet. Husky, Stihl, or Echo. Needs to be in running condition, but not worried about cosmetics. I'd love to see some detailed photos. Thanks guys!
  5. N

    Want to Sell Husqvarna 543 XP Parts.

    Hi! I'm selling my month old husqvarna 543 XP as parts. This unfortunate saw got hit by falling pine :clap:. Both sides of crankcase, flywheel and lots of plastic parts destroyed, fixing is no option with this one. Here's part list. -Air filter cover with knob ( 577433501 AIR FILTER...
  6. chipper1

    Sold Couple Husky 372's

    That's right, my saw storage bench is still a little full, these two are the next set to offer. These are both low hour pre xtorq saws. 525 and 575 PHO plus shipping. Pictures coming soon.
  7. J

    Husky 371XPG

    Got a Husky 371XPG. Took out the carb to rebuild and I notice this wire snipped at ground, but then a snipped wire back a ways too. No, wire won't stretch to reach. It seems like someone took a segment out of it. Or, its 2 separate wires. I got this saw from my dad. He didn't know anything about...
  8. Rob454

    Husqvarna 181se

    Alright, so I've been in the market for a larger chainsaw for doing firewood. I got online and fell into a basically free 181se It has really good compression, gets fuel, but no spark. I cant seem to find any information on testing chainsaw coils and I am not the type to throw parts at anything...
  9. thefarmboy21

    Husqvarna 435 X Torq problems, need help. Starter, fuel leak, not getting full throttle, etc

    The other day a guy from work called me up, because he was having problems with his 435 Husky. He said it sat for several months (apparently somewhere moist cause the bar and chain had fresh rust) and got it out to do some work around the farm. According to him he got it fired up and then it...
  10. BonScott46

    Bar adapters

    Any adapters for large husky to small husky or does the oiling not line up?
  11. brian99574

    Sold 288 XP UGLY but complete

    I got a 288. It's complete with the muffler but I lost the muffler bolts. Cylinder and piston have scratches. It does turn over. It's ugly as can be but I believe it would make a great project for someone. $100 plus shipping from 99574 gets it.
  12. caddguy

    2100 plus all milling rigging...considering selling...?

    I am considering selling my SCARR ported Husky 2100 with a 46" ish..panthermill II and 36"Orange GB Ti bar and 44xl GB Ti bar AND a 50" Cannon with all chains...oh and a pristine OEM 2100 cylinder and new Meteor 394 piston and rings....and a few other goodies. I am getting out of milling and...
  13. thefarmboy21

    Husqvarna 55 build: Anyone done a timing advance or have any port timing #'s?

    Started tearing down my open port Husky 55 today. Bought it as a parts saw, because it was bell to be blown up, turns out the spark plug threads were stripped. So I figured I'd pull the jug and fix it and while I'm at it, do some port work and few other misc mods. Has anyone done a timing...
  14. C

    Husqvarna 350 wont start after chain popped off bar?

    I have a husqvarna 350, it's an older saw but it still ran great up until last week. I was cutting some tree limbs at work and the chain popped off the bar. So I put the chain back on just like every other time it had popped off and adjusted the chain tension. When I tried to start it, it...
  15. Armbru84

    Sold Husky 335xpt

    Good condition Husky 335xpt top handle. Bought locally, only used the saw a few times until I found a 200t. Runs good, comes with a 12" bar and total of 4 chains. Bar oils well and gain brake works. Always ran at 40:1 with Stihl oil. $200 plus shipping from 49345. I can pm more pictures and a...
  16. Slingyman

    Want to Trade Chainsaw Bars

    First time posting but not new to the site. Have 5 bars I would like to trade or sell. Bought them a while back thinking they would fit my stihl 460 but they have a different mount. Not in the best looking shape but are fully functional and would work great. Two bars are 34", one Cannon and one...
  17. A

    Husqvarna aftermarket cylinder?

    Looking for recommended brands/sources for Husky cylinder/piston rebuild. 575xp Seeing ones on eBay for under $50. Are they quality..? Thanks
  18. chipper1

    Sold Minty Husqvarna 346XP NE PHO

    Just as the title says, Minty 346xp ne:baba::baba::baba::baba::baba:. But dirty in the pictures sorry. The picture of the chain is a brand new chain next to the original from the saw to show actual use, it does not appear to have ever been filed. Compression is at 150 PSI. $500 plus shipping...
  19. Snarkgrad

    Husqvarna 346XP Brand New!

    Howdy, New to the forum but I've been researching this saw on this forum extensively for about a month. Here's the story: I decided of the "new" saws I was considering I figured the 550xp was the best suited for my needs, wanting a pro saw thinking it would be resilient and naturally I made...
  20. thefarmboy21

    Re-assembly of Husqvarna 50 (51/55) need timing and muff mod advice

    Since before Easter I've been working on my Papaws late 80's model 50 Husky. I'm a pretty decent engine mechanic...but 2-strokes turned out to be more than I bargained for haha. Anyway, the saw had a ruined piston and cylinder, had them off in less than 20 minutes. 10 minutes and $23 on eBay...
Back
Top