husqvarna

What would a brand new Husqvarna 288XP Lite be worth? Serial # is 64001XX, omitted the last two numbers to avoid someone saying I stole it from them. My dad had a habit of buying things and shelving them, forgetting he bought them, or where he put them. After he died, I found this saw cleaning...

Husqvarna 41 a toy with serious fun!

Hello Everyone, I have a strange issue with a 435. It will start and run fine, after some time idling it will bog and die as soon as you hit the throttle. It will fire right back up after and run again, revs fine, then again, after some time idling it will bog and die when you go to rev it...

Well as you can see I picked up a Husqvarna 359 yesterday for $25. After I blew all the gunk off she looked to be in decent shape, that's is until I pulled the muffler and saw the scoring on the piston and when I looked back into the head I saw more scoring on the intake side. She feels like...

Just recently bought a used 345 for cheap, I’ve checked the piston and cylinder through the exhaust side, looks great inside no pitting or scrapping. Compression feels solid(have not verified with gauge). When I got it the saw had been sitting for a while but I could get it to fire up and idle...

Looking for an approx value on a husky 49 from 1998. She's been used but still starts pretty easy (3rd or 4th pull) runs and cuts great. No cracks in case. Nothing broke off. Can't find info on this thing as far as value and don't want ripped off, as I'm new to this awesome world

New in box am top ends. Mostly laser cylinder kits couple tecomec ones. Have other saw/small engine parts to go through yet 2 husqvarna 365 1 stihl 038 1 husqvarna 288 1 husqvarna 345 1 husvarna 575 1 husqvarna 268/268k 1 stihl 029/ms290(laser don't have picture atm) $80cdn+shipping located...

Been a while since I’ve posted on here, I’ve been getting into porting saws lately and just finished a silver tag open port 50 Rancher Does anyone have some advice on changes I could make to have it run faster if I did another one? I know it could use a bigger carb and a little transfer work...

What is on the list what I have by the roll and 25% off the prices in the list + shipping if needed to ship. I do have a bunch of 404 0.63 loops mostly in semi chiesel. If interested send me a drive link count so I can go match up. Mostly oregon but some stihl loops in there. I'm in winnipeg...

Phew, that was a long title. Note : 365,371,372,385,390 use the same size muffler (I am content with either OEM or non-OEM dimensions as I know they'll roughly be in the same ballpark) I'm working on a project with my son, and I am curious if anyone has the LxWxH dimensions of a muffler from...

I currently have a Husqvarna 266XP I am running a 20” full chisel 3/8 chain on it. Last few times I have had it out I haven’t been very impressed, it just seems to be loosing its pep. I cut 7-10 cord a year mostly pin oak, mulberry, and maple. I run an Echo CS370 for my limb work and anything...

Rep stopped by our work today and left this to try… anyone have experience running it?

I'm replacing the intake boot. Probably end up taking off the cylinder now also. So my question is on the second picture. There's a line on the piston and there's some metal on the edge of the intake ramp. Is this bad? Compared to tge new intake boot , the old ones mating surface gasket was...

Does anyone have any information (website, pdf, ...etc) that helps explain the Husqvarna parts number system, for example: 725 53 45-55. This number is for a carburetor/intake elbow screw on a 2100CD. I have found on another website that this part number references to a "Mc6s 5x65", I am not...

So i've been rebuilding this 550xp M2, cleaned the hello outta It and started to rebuild from the bottom end of course. No issues at all getting the cases together, but when it comes to try and spin the crankshaft to check the right-left alignment it feels like there really Isn't any point all...

I purchased a 575 xp from flee bay towards the beginning of the month description said WORKS GREAT it arrived a week later or so unboxed it and the saw wouldn't turn over I could rock it back and forth a little then it magically turned over, so I put some gas in it and tried to start it would...

I have a husqvarna 350 I bought used. It ran great when I first got it, but after cutting for one day, now it wont rev up and stalls out. I have completely replaced the carb, fuel lines and intake boot. When it starts( relatively easy) it will bog down when throttle is opened, and acts like the...

Can Gurantee all filters are new old stock. Most of all of them are Oem filters except in the last picture you can see for your self. Shipping from Middleburg, Pa. Price doesn’t include shipping paypal f&f preferred. Thanks for looking

Jonsered 625, 630, 670 top covers- $55 ea Clutch cover with brake handle- $75 Jonsered 2165 top cover- $60 2171,2172 air filter cover- $35 Husqvarna 362,365,371, 372 Cover with Low top- $50 Husqvarna 394 Filter base- $30 Jonsered 2077/2083 exhaust- $70 2077/2083 new felt air filter -$25...

I've been looking into changing my 450 Rancher 0.325" set-up to run 3/8" chains. This is the only saw I have running at this pitch, making my stacks of new chains collect dust (not sawdust). I have many new 3/8 bars already, I'm looking for suggestions on clutch and sprocket.