husqvarna

Rep stopped by our work today and left this to try… anyone have experience running it?

I'm replacing the intake boot. Probably end up taking off the cylinder now also. So my question is on the second picture. There's a line on the piston and there's some metal on the edge of the intake ramp. Is this bad? Compared to tge new intake boot , the old ones mating surface gasket was...

Does anyone have any information (website, pdf, ...etc) that helps explain the Husqvarna parts number system, for example: 725 53 45-55. This number is for a carburetor/intake elbow screw on a 2100CD. I have found on another website that this part number references to a "Mc6s 5x65", I am not...

So i've been rebuilding this 550xp M2, cleaned the hello outta It and started to rebuild from the bottom end of course. No issues at all getting the cases together, but when it comes to try and spin the crankshaft to check the right-left alignment it feels like there really Isn't any point all...

I purchased a 575 xp from flee bay towards the beginning of the month description said WORKS GREAT it arrived a week later or so unboxed it and the saw wouldn't turn over I could rock it back and forth a little then it magically turned over, so I put some gas in it and tried to start it would...

I have a husqvarna 350 I bought used. It ran great when I first got it, but after cutting for one day, now it wont rev up and stalls out. I have completely replaced the carb, fuel lines and intake boot. When it starts( relatively easy) it will bog down when throttle is opened, and acts like the...

Can Gurantee all filters are new old stock. Most of all of them are Oem filters except in the last picture you can see for your self. Shipping from Middleburg, Pa. Price doesn’t include shipping paypal f&f preferred. Thanks for looking

Jonsered 625, 630, 670 top covers- $55 ea Clutch cover with brake handle- $75 Jonsered 2165 top cover- $60 2171,2172 air filter cover- $35 Husqvarna 362,365,371, 372 Cover with Low top- $50 Husqvarna 394 Filter base- $30 Jonsered 2077/2083 exhaust- $70 2077/2083 new felt air filter -$25...

I've been looking into changing my 450 Rancher 0.325" set-up to run 3/8" chains. This is the only saw I have running at this pitch, making my stacks of new chains collect dust (not sawdust). I have many new 3/8 bars already, I'm looking for suggestions on clutch and sprocket.

Hello homeowner helpers who know what they're talking about! I have 5 (five) new Husky 120i saws I bought for $200 to get more of the crappy BLi22 batteries that my various light-duty yard maintenance tools eat. The batteries are $189 new from Husqvarna and the complete 120i bundle (saw, bar...

after 1 year in use

Hello all, My buddy and I are restoring an old husqvarna 61 that didn't come with a chain brake. Is it possible to install one on a model that wasn't ordered with one? I bought an oem plastic handle brake but it seems to come into contact with the handle bar. Does it need the old style metal...

Neighbor gave me this 335xpt. ran ok before dis-assembly. Includes new clutch drum sprocket needle bearings and brake band. Took it apart to clean and noted that the cylinder is scored. I’m not going to put a new piston in it, so selling as a parts saw. The air Intake pipe and spark plug boot...

Hello all! I'm hoping someone with good experience with MKI and MKII T540 XP Autotune Husqvarna's could possibly give me some advice. I'm working with two T540 XP saws one is a MkI other is a MkII. The Mk I would run fairly normally without load and for the first 5 minutes it would run in the...

Hi all, I’ve recently come into possession of a 2101 xp in great shape, starts first pull, however it leaks out of what I believe is the tank vent above the fill cap. If anyone has any advice or input on the cause or remedy of this issue Id be grateful. Thanks

Hi all, i’ve bought a few chainsaws off of arbor site now, but i am yet to sell anything through this forum! Figured it was time to share and pass on a few items! I’m mainly looking to trade for some nice saws, or NOS saws that i haven’t been able to find. I’d really like to find a jonsered...

Well i decided to buy my first husqvarna saw and it a 2100. I have absolutely no knowledge of husqvarna saws. It runs and oils but i dont have a husqvarna bar for it right now. Just wanting advice or thing to look out for.

Husqvarna 353, I need a good , well great condition saw with 16 in. bar, and chain if available. I dont want a p.o.s. " positively out of sight, just funnin. I also need Johnny 2153 ,x16 bar with 325, 50 ga.chain, the saw chain is not a have to have. What happened let a family friend...

I'm a bit torn as to sell or not to sell my 394xp. It's in good condition, all oem parts and runs good. I have someone willing to buy it at 900$ CAD. It has the full wrap Here are some pics: I put it up for sale because I am in need of the money and I don't use it that much (maybe a...