husqvarna

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. S

    McCulloch Pro Mac 55: advice/knowledge needed

    I just bought a nice pro mac 55 and was wondering something The saw currently has a Walbro SDC single jet carb (not sure if I am using the term correctly). It has an idle screw and a low jet screw. Seems to run nicely. I have another SDC carb with double jets (idle L and H). Should I swap the...
  2. IntegrityCarpentry

    272xp help finding clutch bearings etc

    I am so thankful for this forum and so much wisdom and encouragement shared here. I have a well used 272xp, actually 268 that was converted and my dad bought it for me well used after the conversion. It was my first saw after using father in laws poulon wild thing for a few years. The 272 has...
  3. Husqvarna 41 Ported in some oak

    Husqvarna 41 Ported in some oak

    My own firefood saw with bigger carb. cheapest chineese cylinder ive found on 3...2..1., ignition timing advance, muffler mod, raised exhaust port, stihl chi...
  4. S

    372xp high top to low top conversion

    I am wanting to convert my 372 high top (HD filter) to low top. I bought the following parts to do the swap: COVER 503 62 80-01 HOLDER 503 62 75-01 AIR FILTER 5114550-01 Question is, after ompleting the swap, will I need to adjust the carb ? If so what might need changing, low jet, high jet...
  5. JKendrick87

    Help my Chainsaw Addiction! Let’s see those saws!

    First saw of my own, I’m hooked and ready to get more! I’ve cut a little with it but can’t wait to really put her to work! Love these 1127 series saws! These babies are tanks!
  6. V

    2100/2101XP Parts

    Hi all, I'm from Belgium and I acquired my first 2100CD (already had and sold 2 2101xp's) but apparently I'm in the need for a complete clutch. The drum is okay but the other part is not there anymore. In belgium I'm not able to find any parts anymore so I was wondering if people here can help...
  7. C

    Husqvarna 236 X-Torq cutting out after doing a cut

    Hi everyone, I have the Husqvarna 236 x-torq which was given to me by my neighbour as a non-runner he couldn’t fix. Bogged when revved. I fixed that by an ultrasonic clean of the carb and a carb kit. It has a Zama carb on it. I used a tachometer and followed the Husqvarna carb settings guide I...
  8. N

    Sold Husqvarna 351 —> 346xp

    Husky 351 that I put a OEM NE 346xp p & c kit on. Built this one to keep and had about 2 tanks through it when I came across a screaming deal on an MS 362 that I think fits my 1-saw-plan a little better. Other than the p & c kit the saw is stock/oem replacement. New metal intake clamp and new...
  9. Lightning Performance

    Want to Buy Husky 394-5 parts

    AV spring system complete with screws if possible OEM only. Also looking for another 394 top cover busted or not to chop up. 394 air deflector behind the muffler. Or 3120 type 394 flywheel Flywheel dogs, springs and bolts. I have OEM air filter...
  10. nraws

    372xp leaking fuel when on it’s side

    I’m decent with saw maintenance, but before I tear this thing down… I regrettably had to get a loan on one of my saws at a pawn shop a couple months ago, and forgot to drain the gas before I left it there, I got it back today and it started fine, ran fine, but I got it home and had it laying on...
  11. MCushman

    Want to Buy 60cc Saw - Prefer Husq or Echo

    Hi! New to the forum and looking for a 55-60ish cc pro level saw that will be used mainly for firewood and land clearing. I’ve got my eye on a Husq 359, 357xp or a Echo 600, 620 but I’m open to ideas! Matt
  12. I

    Husqvarna 3120XP - Chain Locking Up

    Hello Chainsaw aficionados, I recently got a secondhand 3120XP in basically new condition with no bar and chain included. I've been working on procuring a bar and chain for ripping with an alaskan mill and I ended up with an Oregon 363RNDD009 bar (3/8", 0.063", 115DL) and an Archer ripping...
  13. I

    Help Identifying Chainsaw Bar

    Hi, I have a 24” and 36” bar that I received when buying a used 3120XP. I think both are Husqvarna (the 36” came in a Husqvarna cardboard sheath), but neither has a company logo or any naming on the bar itself. The 24” bar had a chain already on it, wrapped in plastic. I’d like to understand...
  14. Antiantivibe

    Blasphemy!

    I’ve honestly had more large bod Macs and Homelites than any other brand, although the old green saws are closing in. However today I caved to an orange Swede, a husky 262XP with the sought after walbro hda87 and factory 18” bar. Only thing to do now is decide on listing it or adding it to the...
  15. Huskyfan88

    Want to Sell Husqvarna 357xp

    Husqvarna 357xp for sale, id give it about a 8.5/9 out of 10. Used but lightly, all plastics still bright and shiney. Very clean saw for its age. Saw is located in NJ or I can ship in the continental usa for a fair price. $650
  16. Huskyfan88

    Want to Sell Husqvarna 262XP new never gassed

    Up for sale is my 1994 Husqvarna 262xp. Legendary saw put away for the last 27 years. Brand new, never gassed. condition. Still has the little plastic tag holder hanging on the saw. Saw is in NJ and I can ship in the continental usa for a fair price. $1100
  17. C

    Husqvarna timing advances

    So I've got a 365 x torq and a 266SE. I've done base gasket deletes and muffler mods on both, and opened up the transfer covers on the 365xt. I've had good luck with timing advances on other saws, simply filing off part of the flywheel key. But I can't find a lot of info on doing that with these...
  18. MAngelotti1

    Sold 2100cd intake block, found it

    Looking for a good intake block for a 2100cd
  19. JohnnyChainsaws

    Sold 2016 husqvarna 562xp new P&C kit installed recently

    2016 husqvarna 562xp with new P&C kit installed professionally at husqvarna dealer. Decompression button deleted. Saw had some scoring on exhaust side and would not staying running which is reason for replacement. Saw now starts and runs great and is ready for the woods! $600 shipped with 20”...
  20. JohnnyChainsaws

    Sold 2021 HUSQVARNA 395XP PHO

    Used 2021 Husqvarna 395xp Powerhead only - bar not included. Build date was december of 2020 - original purchaser bought in april of 2021. Customer decided unit was too big for him and traded it on a new 372xp. Was not used much at all. Starts and runs great. Located in ashland, va. Paypal...
Back
Top