stihl

I've heard Stihl discontinued the MS880 chainsaw for emissions-compliance reasons and replaced it with the MS881. Supposedly it has the same HP and CC's. However, the MS880 was rated to pull a 59" bar, and the new version, the MS881 is only rated for a 41" bar. Does anyone know why they de-rated...

All the usual suspects, take-offs, broken or that your done with now. Any 1124 or any large saw parts for Stihl will be considered. 075/760, 105s, 050, 051, TS510, 070, 090, ect... If you have an add here listed I've seen it already. Plastics Starters and parts Clutch covers Oil pumps working or...

I have a Homelite XL-924 that I can’t get to idle and keep running! Here is what I know: -It has spark + brand new spark plug adjusted with the correct gap -145 psi -Exhaust baffle has been grinded and is free of any build up -Brand new fuel lines. Carb is pulling gas. Running 32:1...

If this is not the proper forum please forgive me and maybe someone can move it to the proper location. Need a brush cutter for briars and brambles and tall grass, and minimal trees - maybe occasionally 1 inch. Unread somewhere 240 is 2 stroke and the R model is the valved engine. I have an old...

Will I increase the performance of my saw if I enlarge the factory exhaust hole? I was thinking of doing it with a die grinder. Will my saw burn out? How big should I go? Has anyone done this before? Is too much too much ? I already have a West coast saw bark box on it Cheers

I was thinking about STICK WELDING a west coast saw exhaust port on a MS 461 muffler. Will the exhaust handle the heat from the welding? What do I need to use as equipment? Has anyone done this before ? Cheers!

Hi, I need an recommendation for an pole saw/pruner. For now I am looking for the Fiskar one or the Stihl PP900. I don’t have an big bud because is not something that I will use a lot. I was look online but I am only seeing really cheap one that can be ship to Canada.

Hello all! Long time lurker and first post, very exciting. :D I have an 034 Super, all original looking and very clean, that I got off a guy selling out a rather large collection. Upon detailed inspection when I got it home, I noticed a slight score starting on clutch side of exhaust port...

Hello Any of you guys that have read any of my threads and subscribe to my channel on youtube are invited. I have started a WiresX room where Hams/Chainsaw lovers can actually talk together. You need to be a licensed Ham. Any license level and have a C4FM digital radio. I have everything active...

S%#T hit the fan at the job today and I think I sheered the flywheel off of my workhorse, an early 066 red light. I am in desperate need of a new flywheel for the ol girl. The saw is at the shop and I will find out more about what the specific part is. The old coil was replaced (I assume for...

Hey all, I was "fortunate" to find a Stihl 192TC at a garage sale for $20 recently. Catch was the carb was bad, but the fellow selling it threw in an additional carb (C1Q-S135) and a few other misc parts from another 192TC he had gutted for free. I figured "why not?" For $20 seemed like it...

** LISTEN TO ATTACHED VIDEO** I just installed a West coast Saw Bark box on my Stihl MS 400 m tronic and I am having doubts on if it is harming the saw or not. I followed the proper carb reset on the manufactures website after install and I use Stihl Moto mix. It cracks and pops a lot. Is this...

Hi, just got a 026 from a friend a he told me that he can not start (hard to start) it he needs to pull it 12 to star. our local Stihl dealer look at it and told us that is a model defect. do you know something that I can do for that This was only use for 10 contracts and stored is like new...

I recently purchased a bark box from West Coast saw and I am wondering what do I need to do after installing it (the first start up) in order to not cause any damage to the saw? Do I need to reset it after installing the bark box? Here are the 2 procedures I found online for M Tronic saws...

Hi good day everyone. I have this old Stihl brush cutter that has been sitting in the store for almost more than a decade. Tried to Google for its information but found none. I would like to ask for everyone's expert opinion here if this brush cutter is worth restoring? I'll upload a few...

Just bought a MS 461 and order a bark box from West Coast Saws. I am wondering how do I need to tune the saw after installing the bark box? What are the factory max RPM and Idle rpm before bark box? What are the recomended MAX RPM and IDLE RPM after installation? Thank you very much

Hello to all I currently have in my line up the following saws: Stihl MS400 CM and Husky 288XP I want to buy a new saw and I am wondering which one to buy and how well the saw will fit my line up. I mostly do firewood and occasionnaly I will be contracted to fall timber for residential...

660 650 066 064 front muffler covers. No outlet type. Busted and spun 660/066 cases or halves with or without cranks. Busted or not tank handles for 1122 or 1128 034, 036, 034S 360 360P parts and builders boxes. 034 plastics 084 anything or 1124 saws and parts. Ms400's or burnt jugs and pistons...

Here's pics of an 066 for sale on craigslist. It's 250 miles away but he only wants 400 bucks for it. I think that's a pretty decent deal but what do you all think? Thanks much

Hello all I have a STIHL 066 that just got out of the shop and mechanic said it was “tuned” right. The saw has aftermarket exhaust on it. Throttle response is good and engine seems to be running good. while idling, the chain keeps turning and sometimes turns at high speed. Any idea on what...