166 sachs or 090 stihl

[cuttinscott]

the Sachs-Dolmar 166's will be out and runnin for the May 20 GTG


Scott

 

[RiverRat2]

Hey EJ,,,,

the 3120 is 42mm stroke 60mm bore the 166 stroke is 48mm 56mm bore put that cylinder on that saw and it is a animal ask rick helsel and i got the 090 stihl on the sachs and it is a grunt horse buy the way big difference in the 166 and 3120 cc once they collide it takes a special spacer plate on the bottom of the cylinder i got one of those to:rockn:

what dont you have in the way of saws???????????????

 

[e.j. mcnamara]

i love saws i don't smoke drink gamble i myswell put my money in my adiction some of the guys on this site don't realize how much fun it is to race saws that is my rush you wouldn't believe what i got for saws

 

[Stihl Crazy]

i got one i have a MV 166 with a 090 on it running alky cuts 1.52 over the wood no bull running a 15 toth 3/8

My 166 is a MV saw also. It is getting a checkup by Ed. I should have it home next month.

 

[166]

Chopwood;646810]hey EJ, I think the 166 is more rare. I have only seen three of them in person. I have seen probably five in pictures. Most of them belong to the cutting edge in NY. I have probably seen two hundred 090's in person or in pictures.[/

I know where a couple more of them are but i'm not gonna say where thay are.:hmm3grin2orange:

Steve

 

[GASoline71]

i love saws i don't smoke drink gamble i myswell put my money in my adiction some of the guys on this site don't realize how much fun it is to race saws that is my rush you wouldn't believe what i got for saws

Yeah... we prolly would my friend...

Gary

 

[Cut4fun]

EJ, check your pm I just sent you.

 

[poleframer]

My neighbor has a 166 in need of a top end. Will a 3120 top end, or any others that are available, bolt on without mods or loss of power? Thanks
Russell

 

[e.j. mcnamara]

no it gives it alot more power and alot faster in the wood

 

[e.j. mcnamara]

look poleframer and stihl crazy

hay poleframer there is sachs 166 with 3120 on it on the thread what is the biggest saw would you own

 

[poleframer]

I'll let him know about this thread, I know he'd sure like to get that saw up and running again. I like my 090, was just out slabbin some fir yesterday.

 

[e.j. mcnamara]

hay

hay poleframer got a pritty much new 166 cylinder and stock piston will be willing to sell your buddy

 

[poleframer]

Cool! I'll let him know, whatcha want? PM me. Russell

 

[e.j. mcnamara]

always looking for parts for these saws

ploeframer do you have any extra parts for the 090 or the 166 or anybody that does:greenchainsaw: oh buy the way i just bought 5 090 stihl but want more:hmm3grin2orange:

 

[thomas72]

I do not see why putting on the 3120 cylinder will give it much more cubic inches. You are gaining a larger combustion chamber but you are losing piston travel between the top of the cylinder to the top of you transfer ports. The only thing you can really gain is extended transfer ports as the piston travels further to the bottom of the cylinder.

 

[e.j. mcnamara]

read the hole thread

read the hole thread 166 sach is 56mm bore 48 mm stroke 3120 is 42 mm stroke and 60 mm bore you are going to gain 6 mm stroke and 4 mm bore that is like comparing a 61 rancher to a 2100 husky

 

[poleframer]

hay poleframer got a pritty much new 166 cylinder and stock piston will be willing to sell your buddy

PM sent

 

[e.j. mcnamara]

check your pm

 

[thomas72]

Yes, I read the thread and know the stroke and bore of both saws. I would like to know the measurement of the piston travel from the top of the transfer ports and the top of the cylinders on both saws if someone may have them.