2-man saw thread

[Modifiedmark]

That looks like fun Mark. At least my 7-55 started right the heck up and ran good after setting all winter. I don't feel like messing with that carb again as it still leaks some setting if not turned on its side. I wish Mac would have built a shut off on the sediment bowl..

 

[cbfarmall]

Here is the finished project. CbFarmall brought his beautiful super twin over for us to try out and he gave me a hand running the Lombard. It starts easy and seems to run very well.

It chewed though the 30" Oak block its setting on well enough
View attachment 1192550
View attachment 1192551
View attachment 1192552

Had to use a sundial to time that Lombard in the cut. But it got through....

 

[Modifiedmark]

Had to use a sundial to time that Lombard in the cut. But it got through....

That Lombard presented itself very well in the demonstrations at Baraboo last fall. It cut better then quite a few others there.

 

[Modifiedmark]

Got another Poulan 52 two man finished after looking for years for the correct helper handle for it.

 

[heimannm]

Manual oilers on both ends, hopefully someone remembers to push their button now and again.

Mark

 

[Modifiedmark]

Manual oilers on both ends, hopefully someone remembers to push their button now and again.

Mark

Mark, this later model were able to be used as a one man saw by using the double end bar and the helper is a quick release. Thats why it has a oiler and chain adjuster on the transmission. There were some with a bolt on handle at the front of the tank for helping with one man use. I'm looking out for one.