2101xp/ top all time muscle saws!!!!!!!!!!!

[54stude]

You're the man Norm. I won't fight you for that DP 2100 muffler cover. All yours.....

Shane's hunting down a starter for me. I'm working on some leads for gaskets that I'll need when I split the cases to replace the bearings. Bearings and seals are easy to get new still. Same ones are also used in the 288XP BTW.

I have a 2100 starter for you, just trade me something for it and its yours. It is missing a small part of the grille, but is functional and includes the rope and a good spring. PM me your address.

 

[Eccentric]

pansyassed plastic.

LOL. Only plastic on that saw is the top cover. It has a thumb button too.

I have a 2100 starter for you, just trade me something for it and its yours. It is missing a small part of the grille, but is functional and includes the rope and a good spring. PM me your address.

Thanks my friend. Turns out the saw has a starter but needs a clutch cover. Norm hadn't seen the saw for a while

 

[NORMZILLA44]

Welcome Aaron! And thanks for looking out again Shane! 54stude thanks for offering up that help to Aaron. And Aaron on the pansy plastic I think Randy was refeering to his new electric saw

 

[Eccentric]

Welcome Aaron! And thanks for looking out again Shane! 54stude thanks for offering up that help to Aaron. And Aaron on the pansy plastic I think Randy was refeering to his new electric saw

Did you notice that I made that last post while we were taking a break around noon? Chicken wing in one hand and the smartphone in the other.

 

[NORMZILLA44]

Saweet! Those were good wings, and gotta get me a smart phone!

 

[NORMZILLA44]

Wheres Aaron and that new project:msp_biggrin:

 

[homelitejim]

Here is a muscle sleeper, same size and weight as a 2-10 McCulloch only with a 70cc power plant, Super 6-10, saved her from the shredder and will take her cutting this year to fill my 20" bar slot.

I know it does not look like much especially with the oil film from my fingers all over the pic so here is a video so you can experience the sweetest sound in the woods next to a elk bugle.


[video=youtube;aanGGx7qYOE]http://www.youtube.com/watch?v=aanGGx7qYOE[/video]

 

[Eccentric]

Wheres Aaron and that new project:msp_biggrin:

At work/in the shop (me/2100CD).

 

[NORMZILLA44]

Jim nice saw! Old work and war horse! Aaron good deal buddy, and I am sure you already cleaned it up a little:cool2:

 

[Eccentric]

Jim nice saw! Old work and war horse! Aaron good deal buddy, and I am sure you already cleaned it up a little:cool2:

Yeah all the mag and steel (especially in the crankcase) has been sprayed down with my K1/ATF mixture

 

[NORMZILLA44]

Awesome Aaron, can't wait till it is on the road!! Muscle will be out tommorrow my friend, and hoping the next job, which is a big one comes. Then your in bro!

 

[paccity]

 

[Eccentric]

Wow Fraser. A blue topped 272XP, 288XP, AND 2100/2101????

I've never seen a blue top for the 285/1100/2100/298/2101 saws. Does the small square K&N filter (as used on the 288 or 272) fit under that cover................or is that actually a 281/288 cover set on your 2100/2101?

 

[paccity]

Wow Fraser. A blue topped 272XP, 288XP, AND 2100/2101????

I've never seen a blue top for the 285/1100/2100/298/2101 saws. Does the small square K&N filter (as used on the 288 or 272) fit under that cover................or is that actually a 281/288 cover set on your 2100/2101?

no just thinkin. i think i'll try my hand at making a blue hi top for the 2100 by grafting the lower 2100 cover with the hi top off of another husky like the 272 , did some measuring and i think it's doable . then match the paint in the krylon plastic paint and see how it works. plus i think i'll do a repaint on them all , make them pretty again since they have been getting worked alott. and on the 272 i have been hesitant to cut the blue top for the dp muff.

 

[NORMZILLA44]

Cool stuff Frasier! Love that bench fill of huskies! Place around here Tap plastics. Was going to see if they could make the stock 2100 covers. You have a good plan there my friend! Here is a few pics from yesterday. The parmeter Brothers and me. All technical, and in some good Euc, of course nobody got a pic of me, cutting a giant stump with my 2101. Brian was going to sharpen his 066, I said mine are ready to go, so we grabbed the 288-2101, the 044 my old saw now John's was used, and my 372, for tree top stuff.

 

[Big_Wood]

i am back!!! computer issues guys. i won't even go any further into it. lets just say a week of stress then finally broke down and bought a way better one. i am stoked are those blue top saws factory or painted? alot of the guys around here paint them blue. i asked why and they said so they can tell which saw is their's. i couldn't quite understand how that worked because they all painted their saws top covers blue i have never seen one blue from the factory but those don't look painted. even the scratches are blue. anyways i'm back full force gonna be getting back to the saws tomorrow afternoon

 

[Eccentric]

i am back!!! computer issues guys. i won't even go any further into it. lets just say a week of stress then finally broke down and bought a way better one. i am stoked are those blue top saws factory or painted? alot of the guys around here paint them blue. i asked why and they said so they can tell which saw is their's. i couldn't quite understand how that worked because they all painted their saws top covers blue i have never seen one blue from the factory but those don't look painted. even the scratches are blue. anyways i'm back full force gonna be getting back to the saws tomorrow afternoon

Those blue tops were an aftermarket 'high top' cover that were sold with K&N filters. They haven't been produced in years. The plastic is blue through and through, not painted...

 

[NORMZILLA44]

Glad u are back, and yes computer stuff can be a headache from hell.

 

[Big_Wood]

I have been having trouble with this windows 8 BS but I have finally figured things out. I was uploading pics to the new puter and found this one. I figured I would post it. it's the only one I have of this saw. I donated 2 to my buddy and he built one good one out of the 2. then after it was running something else happened as you can see :hmm3grin2orange: ported and piped as a alky race 2100. wish I took other pics from different angles :bang:

 

[NORMZILLA44]

Sweet saw, looks like my old cr480 honda pipe. I am very impressed!