60cc Awesomeness, who is king?

[chipper1]

Or do a GTG where everything could be settled with the same bar and chain...

That's right and I'll run them both and make sure the best husky wins .

 

[chipper1]

exact

Exactly, best way to compare 2 saws

Even that has variables, but it should give a bit more accurate comparison. It always helps when everyone is open to a saw other than their champion winning, if not the whining about this condition and that chain or fuel... always happens.

 

[cuinrearview]

Even that has variables, but it should give a bit more accurate comparison. It always helps when everyone is open to a saw other than their champion winning, if not the whining about this condition and that chain or fuel... always happens.

From everything I'm gathering it sounds like you may have already been to an internet GTG with the OP. I hope it went better than the people I've talked too's experiences.

 

[chipper1]

From everything I'm gathering it sounds like you may have already been to an internet GTG with the OP. I hope it went better than the people I've talked too's experiences.

Yes, the one with wizzer, wizzo, or whatevero yes I lost lol.

 

[cuinrearview]

Yes, the one with wizzer, wizzo, or whatevero yes I lost lol.

I think with that crowd, we all lose.

 

[Frank Rizzo]

Just as the stinky pirate is now wrong about everything, your now pissing in the wind yourself, unless you also have a Dyno .

Maybe I do , Maybe I don’t

 

[cuinrearview]

Maybe I do , Maybe I don’t

He doesn't Brett. But I guarantee if you play his game, he'll outlast ya.

 

[chipper1]

He doesn't Brett. But I guarantee if you play his game, he'll outlast ya.

But he has google and will be back with some pictures and maybe even a video in a little, wait for it...
He comes and goes(gets the boot), I just stick around lol.

 

[SmellyPirateHooker]

Maybe I was misunderstood about the dyno. Repeatable within itself but not so much from one to another. So in other words, good for you to test a couple of saws on your dyno, maybe not so much if I test one on mine and compare with a saws numbers from yours.

 

[Little Al]

Maybe I was misunderstood about the dyno. Repeatable within itself but not so much from one to another. So in other words, good for you to test a couple of saws on your dyno, maybe not so much if I test one on mine and compare with a saws numbers from yours.

The Dyno" Charlie" at ADM has a "Gismo" that will give comparisons to equalize conditions for the running of multiples runs of the same motor at different days or a different unit ,it converts the readings to be all at the same condition parameters ,knowing the unit cost I don't think Frank is in a position to shell out that amount of $'s with the apparent size of his outfit

 

[Frank Rizzo]

The Dyno" Charlie" at ADM has a "Gismo" that will give comparisons to equalize conditions for the running of multiples runs of the same motor at different days or a different unit ,it converts the readings to be all at the same condition parameters ,knowing the unit cost I don't think Frank is in a position to shell out that amount of $'s with the apparent size of his outfit

Yah , this Saw is at 5.8hp which is .2hp less than a stock 461 or a 462c ! I Can’t wait to get me paws on the 462c (whenever the dealer comes thru!)- should be able to get 7.2-7.5 hp out of her and with a 20-25” bar and sharp chain it’ll be goodnight Irene !

 

[Deleted member 135597]

Yah , this Saw is at 5.8hp which is .2hp less than a stock 461 or a 462c ! I Can’t wait to get me paws on the 462c (whenever the dealer comes thru!)- should be able to get 7.2-7.5 hp out of her and with a 20-25” bar and sharp chain it’ll be goodnight Irene !

Nice vid, never seen you post that one before, oh wait that’s the third time you posted it in 3 pages......

 

[cuinrearview]

And he forgot to mention that the particular dyno he used measured the saw 5.5hp stock...

 

[SmellyPirateHooker]

Yah , this Saw is at 5.8hp which is .2hp less than a stock 461 or a 462c ! I Can’t wait to get me paws on the 462c (whenever the dealer comes thru!)- should be able to get 7.2-7.5 hp out of her and with a 20-25” bar and sharp chain it’ll be goodnight Irene !

It won't work, you clearly state you're a 241,261 and 362 specialist.

 

[Frank Rizzo]

It won't work, you clearly state you're a 241,261 and 362 specialist.

Yah , soon to add 660 to the header and when I get the 462c and dip it into the cauldron of performance it’ll be in the headline too !

 

[chipper1]

Yah , soon to add 660 to the header and when I get the 462c and dip it into the cauldron of performance it’ll be in the headline too !

So once you've had your hands on one saw your a specialist on it .
Now if you got paid to work on it you could say you're a professional, but even that doesn't make someone a specialist or an expert.
I'm sure Mr hotsaws101(aka Jack) is proud to be sponsoring such an experienced specialist thru his franchise .

 

[TBS]

I'd bet jack doesn't even know he's sponsoring him.

 

[Frank Rizzo]

So once you've had your hands on one saw your a specialist on it .
Now if you got paid to work on it you could say you're a professional, but even that doesn't make someone a specialist or an expert.
I'm sure Mr hotsaws101(aka Jack) is proud to be sponsoring such an experienced specialist thru his franchise .

Yah , a good Saw - mechanic should be able to work on ANY Saw right ? Well I can’t very well say I’m a 372xp specialist if I don’t even OWN that particular saw (though I have operated them ) - that wood be dishonest on my part ... look guy I’ve cut / processed More wood than most do in a lifetime ... By using and experimenting on MY equipment I find out what works and what doesn’t ... very simple and straightforward ... as far as Jack aka Hotsaws101, He’s an excellent faller and a very,very good builder . In fact I own a 241c insane-0 and a 461R extreme and am well-pleased with both saws ! Really not interested in your assessment of the situation nor the snarky presumptions you feel you must make for whatever reason ... good day !

 

[CHOP...CHOP...]

[Never keep up with that 362c in a million years ! You can run a 32” and make one cut ... I’ll strap on an 18” dent puller and plow threw slick fifty and walk around to the other end of slick do him there as well and STIHL have time to smoke slicks fifty's pole and drink juice out of his rocket jammed azz before you finish lolQUOTE]

Dream on FRANK

 

[huskihl]

Dream on FRANK