7/16" chain for old Husqvarna

[Jonas]

Hi there
I just started on this site, and I would like to know if there is anybody that knows how & where to get som 7/16" chain + eventually a 30 " bar for an old Husqvarna MS 90F (I think it is from 1962).
I asked 5 different places all over Denmark, but there was only one guy that had ever heard about it.
Is it obtainable in USA?

 

[Lawn Masters]

Probably not. 7/16 chain is no longer made, you MIGHT get lucky and find it somewhere for sale, but your best bet is to convert the saw to a different pitch, like 3/8 or .404 if possible.

 

[Mange]

I would guess you have .404 chain if you don't have a specially made sprocket, if you do I have .404 here.
I have 3 parts saws if you need any parts.

This saw is the first saw Husqvarna made. A very nice saw with a special sound to it.
Have you started it?
I live outside Kristiandtad, in Skåne, Sweden, not far from you.

Let me know if you need info or help.

 

[Jonas]

Yes, I have started the saw, actually it runs rather good. It is the original pitch according to the instruction book which I also happe to have. Let me know if you would like a copy.
Actually the saw was bought at an auction in Wärmland for 100 Skr. (cheap) including the original instruction book and tool set.
By the way, my parents have a "torp" on Wärmlandsnäs, so I go to Sweden quite often.
I also have a coyple of old Partner saws approximately the same size as the Husqvarna, but they don't look quite that good.

 

[Mange]

Post some pics of the saws.

You are right it say's 7/16.
I have 3 "F" and one "A", 2 "F" with .404 and the other 2 with 7/16.

Stop by If you are on tour and drive by, here is about 200 saws, give and take a few. I think you would enjoy a couple hours in my garage.

I have parts for the Partner saws too if you need.