accelerator pumps on Zama carbs

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

taxidermist

ArboristSite Operative
Joined
Feb 20, 2008
Messages
156
Reaction score
16
Location
Fowlerville Michigan
I have had about 3 stihl string trimmers in the shop that have a accelerating problem. I thought the throttle shaft was worn I sprayed a little carb cleaner around the shaft and it ran better. With the price of rebuild kits for these I have just replaced the whole carb for a few more $. Tonight my fs55 1 year old string trimmer starts to do the same thing....well I know its not wore out so I tear out the throttle shaft and find a accelerator pump. I google this and find out the A P o rings are going bad on these carbs.

Is there a fix to these or are we stuck replacing the carbs.

Rob
 
the accellerator pump galls the body which causes o-ring to fail, looks like replacement only but someone else might have a fix
 
The FS-55 has a 2 year homeowner warranty.


With the retail price around $30.00 for most current trimmers, it almost pays to just replace them. I mean, by the time you get the kit and count your time putting it in and it still not working right!!!
 
Wonder if you could hone or polish the body? Then new o-rings.

you might be able to but it might just be a temporary patch if it worked at all.....any polishing or honing would increase the bore.......nothing to loose trying though. good question
 
you might be able to but it might just be a temporary patch if it worked at all.....any polishing or honing would increase the bore.......nothing to loose trying though. good question

Ya, ture. What I've heard actually is to just eliminate the pump circuit, just block it off with JB weld or the sort. The problem is the pump leaks by air causing a lean condition, that's why they fall on their face when you rev them up. I got like 4 or 5 200T cars here with that problem, and they are real expensive to replace around here. Last one cost $140, so you can see my incentive to fix the old ones.

How do you get acess to the pump anyway? I've never taken on that far apart? Take out the throttle shaft?
 
Ya, ture. What I've heard actually is to just eliminate the pump circuit, just block it off with JB weld or the sort. The problem is the pump leaks by air causing a lean condition, that's why they fall on their face when you rev them up. I got like 4 or 5 200T cars here with that problem, and they are real expensive to replace around here. Last one cost $140, so you can see my incentive to fix the old ones.

How do you get acess to the pump anyway? I've never taken on that far apart? Take out the throttle shaft?

i understand completely, $140 is a very good incentive.
yep remove throttle shaft
last 200t carb i priced was $80 C1Q 61E i think thats the latest one out, suppose to be better
pull one apart sometime see if your idea will work....be great if it did, keep us posted on it
 
i understand completely, $140 is a very good incentive.
yep remove throttle shaft
last 200t carb i priced was $80 C1Q 61E i think thats the latest one out, suppose to be better
pull one apart sometime see if your idea will work....be great if it did, keep us posted on it

Sure thing, thanks!
 
The FS-55 has a 2 year homeowner warranty.


With the retail price around $30.00 for most current trimmers, it almost pays to just replace them. I mean, by the time you get the kit and count your time putting it in and it still not working right!!!

I just checked and I guess I have had it for 3 years with about 1 hr run time. JUst my luck!!!!
 
Ok, got a 200T carb apart, throttle shaft's out. Now I've never had one of these apart before, so what am I looking for, for the pump circuit, is it the little brass jet looking think in the middle of the carb body? How do I get it out?
 
Ok, got a 200T carb apart, throttle shaft's out. Now I've never had one of these apart before, so what am I looking for, for the pump circuit, is it the little brass jet looking think in the middle of the carb body? How do I get it out?

No, accelerator pump piston is activated by throttle shaft. See plug on carb body next to butterfly? Thats where piston is located
 

Latest posts

Back
Top