Any ideas?

  • Thread starter Deleted member 149229
  • Start date
Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Yes but it isn`t lit so no spark or heat to cause fire.
You would never believe the amount of oldtimers I worked with in the woods that smoked and handled refueling with a lit cig just a puffing away and fumes rising all about them as they just dumped fuel in a saw or tractor. Only chainsaw I ever seen lit up was my dad`s old 1100 when we were fighting a forest fire. Old saw always drooled fuel when run on its side felling, it lit up but dad didn`t even blink an eye, just took his ball cap off and beat the fire out while never letting off the throttle. Wouldn`t have been pretty if the thing had exploded.
 
I always hated when some oldtimer would be wandering around the shop with a lit cigarette in his mouth. Had one come near me while I was working on a fuel system of a saw, and I went off. He said, "If you had a bucket of gas and I dropped this cigarette in it, nothing would happen".
I then filled a big jar with old fuel, and set it out in the parking lot, and said, "Prove it".

He never did.
 
Yes but it isn`t lit so no spark or heat to cause fire.
You would never believe the amount of oldtimers I worked with in the woods that smoked and handled refueling with a lit cig just a puffing away and fumes rising all about them as they just dumped fuel in a saw or tractor. Only chainsaw I ever seen lit up was my dad`s old 1100 when we were fighting a forest fire. Old saw always drooled fuel when run on its side felling, it lit up but dad didn`t even blink an eye, just took his ball cap off and beat the fire out while never letting off the throttle. Wouldn`t have been pretty if the thing had exploded.
Yeah, Sean is violently anti-smoking, but he likes the "look"........
 
just a little static from low humidity and the correct material sweater, or from the car not having something grounded right
 
Home Remedies for Static Cling in Clothes
  1. Prevent Static Cling with Safety Pin. To dispel any static charge, tuck a safety pin on the inner hem of your clothes. ...
  2. Use Damp Towel. ...
  3. Hang Dry. ...
  4. Wash Synthetic Fabrics Separately. ...
  5. Homemade Fabric Softener. .....
  6. Soap nuts....
  7. Aluminum Ball. ...
  8. Metal Hanger.
Do you guys know what soap nuts are?
I highlighted #6 for question
 
They would always make us fill the jugs on the ground in the G&O industry. The nozzle builds S/E as the fuel goes through too.
Most fires are from the inability to ground due to box liners or fuel in back seats or the carpets. I believe shorter nozzles as well slower feed helps.
 
They would always make us fill the jugs on the ground in the G&O industry. The nozzle builds S/E as the fuel goes through too.
Most fires are from the inability to ground due to box liners or fuel in back seats or the carpets. I believe shorter nozzles as well slower feed helps.
All pump hoses need grounding wire incorporated into the casing, attached to the pump nozzle and ran through the pump housing on to earth ground. Guys fueling machinery from the tanks located in the bed of a truck box risk fires and explosion, good thing they mostly handle diesel.
 

Latest posts

Back
Top