build off challange

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
so here is what i'm thinking.
woods mod, must have stock piston, can have popup, stock carb, can be bored, working choke, air filter, muffler can be ported all you want, must have spark screens. all covers must be in place.
no head saws. 28"b/c.
2 races, stock chain, and race chain, choose 1 or both,
round wood and cants, red oak and white pine.
28”d&c for the build off saws in big oak using stock chain.
14x14 white pine for the chain race. 60d-.050 common saw
92d-33rsc chain $20.25, all from the same roll

I will supply the fuel, 91 octane non eth mixed 32/1

what else?


i want to keep this fun for all that attend so it's not just a race gtg, everyone is welcome. bring a dish to pass if you can.

march 16 17

contestants chain race
tree monkey tree monkey
ecsaws ecsaws
riverrat2 stumpys customs
stumpys customs? dennis cahoon
mdavlee?


a few changes, and a date

Me and Heavy Fuel should be able to make that. I won't have a horse in the race. I may try and do a chain.
 
so here is what i'm thinking.
woods mod, must have stock piston, can have popup, stock carb, can be bored, working choke, air filter, muffler can be ported all you want, must have spark screens. all covers must be in place.
no head saws. 28"b/c.
2 races, stock chain, and race chain, choose 1 or both,
round wood and cants, red oak and white pine.
28”d&c for the build off saws in big oak using stock chain.
14x14 white pine for the chain race. 60d-.050 common saw
92d-33rsc chain $20.25, all from the same roll

I will supply the fuel, 91 octane non eth mixed 32/1

what else?


i want to keep this fun for all that attend so it's not just a race gtg, everyone is welcome. bring a dish to pass if you can.

march 16 17

contestants chain race
tree monkey tree monkey
ecsaws ecsaws
riverrat2 stumpys customs
stumpys customs? dennis cahoon
mdavlee?
 
his buddy wayne slatton makes a fast chain too



Yep Wayne builds one of the fastest chains
that money can't buy. If he likes ya he
will give ya one. But he won't sell one. Yep
good guy. I think the other chain builder
down there is James George ??
 
i just might have to buy myself a 390 if i can find one in enough time to build for this build off ill be in.
 
Hey Tree Monkey, what size saw is going
to be used in the chain race? That is
going to mean alot for setting the chain up.
Also what gear is it going to be running?
 
so here is what i'm thinking.
woods mod, must have stock piston, can have popup, stock carb, can be bored, working choke, air filter, muffler can be ported all you want, must have spark screens. all covers must be in place.
no head saws. 28"b/c.
2 races, stock chain, and race chain, choose 1 or both,
round wood and cants, red oak and white pine.
28”d&c for the build off saws in big oak using stock chain.
14x14 white pine for the chain race. 60d-.050 common saw
92d-33rsc chain $20.25, all from the same roll

I will supply the fuel, 91 octane non eth mixed 32/1

what else?


i want to keep this fun for all that attend so it's not just a race gtg, everyone is welcome. bring a dish to pass if you can.

march 16 17



contestants tree monkey ecsaws riverrat2 stumpys customs? mdavlee?
chain race dennis cahoon stumpys customs ecsaws tree monkey


was thinking of using one of the build off saws for the chain race, 8 pin gear
 
so here is what i'm thinking.
woods mod, must have stock piston, can have popup, stock carb, can be bored, working choke, air filter, muffler can be ported all you want, must have spark screens. all covers must be in place.
no head saws. 28"b/c.
2 races, stock chain, and race chain, choose 1 or both,
round wood and cants, red oak and white pine.
28”d&c for the build off saws in big oak using stock chain.
14x14 white pine for the chain race. 60d-.050 common saw
92d-33rsc chain $20.25, all from the same roll

I will supply the fuel, 91 octane non eth mixed 32/1

what else?


i want to keep this fun for all that attend so it's not just a race gtg, everyone is welcome. bring a dish to pass if you can.

march 16 17



Saw Build Contestants: tree monkey, ecsaws, riverrat2, stumpys customs? mdavlee? Tlandrum?
Chain Race Contestants: dennis cahoon, stumpys customs, ecsaws, tree monkey



hows this look?
did i miss anyone?
 
Last edited by a moderator:
might meet some friends in chicago to follow on this mind numbing 12hour drive...

right now the only thing keeping me from commiting is work


Tree monkey, fixed the list it was confusing
 
Last edited:
[video=youtube;Kfg-uYqw_EM]http://www.youtube.com/watch?v=Kfg-uYqw_EM[/video]

Not trying to derail the thread, but this is Fred aka Mr. He is the guy in black.
 
Saw Build Contestants: tree monkey, ecsaws, riverrat2, stumpys customs? mdavlee? Tlandrum?
Chain Race Contestants: dennis cahoon, stumpys customs, ecsaws, tree monkey

hows this look?
did i miss anyone?

Count me out now. Its too soon for me to get a saw and build it. Might not even be home by then.
 
so here is what i'm thinking.
woods mod, must have stock piston, can have popup, stock carb, can be bored, working choke, air filter, muffler can be ported all you want, must have spark screens. all covers must be in place.
no head saws. 28"b/c.
2 races, stock chain, and race chain, choose 1 or both,
round wood and cants, red oak and white pine.
28”d&c for the build off saws in big oak using stock chain.
14x14 white pine for the chain race. 60d-.050 common saw
92d-33rsc chain $20.25, all from the same roll

I will supply the fuel, 91 octane non eth mixed 32/1

what else?


i want to keep this fun for all that attend so it's not just a race gtg, everyone is welcome. bring a dish to pass if you can.

march 16 17



Saw Build Contestants: tree monkey, ecsaws, riverrat2, stumpys customs? mdavlee? Tlandrum?
Chain Race Contestants: dennis cahoon, stumpys customs, ecsaws, tree monkey



hows this look?
did i miss anyone?


Wish I was closer as that is a format where the results mean something to someone like me...I'll certainly be following the thread. In particular the 28in B&C in big oak to test raw torque & power vs. simply chain speed & cutting ability in soft uniform wood; and also let those saws build a little heat in longer cuts. :) Of even more interest is using typical wear items like chain & filters along with fuel that most actually working that saw would typically use in a build that could be in fact used in the real world...nice concept...:rock:

(It would be interesting to have a subjective rating on how practical these builds are as well..do they blow crap back at you in big wood close to the ground? How about when making face cuts trying to get that extra ft of stump? Stuff like that...)
 
Last edited:
Back
Top