Chainsaw photography

[blsnelling]

My "new" 064.

 

[Rescue1]

This is proof that a good, crazy priced lens is worth its weight. What an awesome picture. BTW What were your settings on the camera? I'm assuming your aperture was set low due to the perfect fuzzed background..

 

[blsnelling]

This is proof that a good, crazy priced lens is worth its weight. What an awesome picture. BTW What were your settings on the camera? I'm assuming your aperture was set low due to the perfect fuzzed background..

That is indeed a super sharp photo, with beautiful bocah as well!

 

[MacLaren]

This is proof that a good, crazy priced lens is worth its weight. What an awesome picture. BTW What were your settings on the camera? I'm assuming your aperture was set low due to the perfect fuzzed background..

Thats a professional shot IMO. Good job!

 

[Rescue1]

Here are a few wood splitting pics done with an Olympus E-450. Not a bad camera, but I don't like the noise the "four thirds" lens system gives me, especially at night..

 

[ChainsawmanXX]

here are a few wood splitting pics done with an olympus e-450. Not a bad camera, but i don't like the noise the "four thirds" lens system gives me, especially at night..

rep!!

 

[Stihlman441]

Dont know how you blokes put up with that cold looking snow ? not for me thanks..............

 

[OhioGregg]

This was a just for fun pic.:msp_smile:

Gregg,

 

[Tzed250]

This is proof that a good, crazy priced lens is worth its weight. What an awesome picture. BTW What were your settings on the camera? I'm assuming your aperture was set low due to the perfect fuzzed background..

Camera Info
Device: Nikon D2Xs
Lens: 80-200mm F/2.8D
Focal Length: 185mm
Focus Mode: AF-S
AF-Area Mode: Single
VR:
AF Fine Tune:

Exposure
Aperture: F/2.8
Shutter Speed: 1/500s
Exposure Mode: Aperture Priority
Exposure Comp.: 0EV
Exposure Tuning:
Metering: Matrix
ISO Sensitivity: ISO 280


L7 by zweitakt250, on Flickr

Nice lenses are nice...

That is indeed a super sharp photo, with beautiful bocah as well!

Thats a professional shot IMO. Good job!

Thanks a lot!!!

.

 

[dhaulk1]

a few of my saws

 

[mweba]

Here you go.

 

[STIHL880]

Roma, i don't get it, a STIHL sign over a DOLMAR saw. hmm, I want that sign, Nice Mar btw.

 

[Andyshine77]

Look at that! a real saw under a crappy sign.:jester:

 

[EXCALIBER]

:agree2:

 

[parrisw]

How to adapt a different piston with different pin sizes!

 

[blsnelling]

How to adapt a different piston with different pin sizes!

That wouldn't happen to be for a 288 piston would it?

 

[parrisw]

That wouldn't happen to be for a 288 piston would it?

Nope, but it could be!! Haven't had the time yet to try that 288 swap. Those bushings are some I did for another member for a top end swap project.

 

[Andyshine77]

That wouldn't happen to be for a 288 piston would it?

 

[parrisw]

I take it, your thinking 288 piston in a BB7900? I heard its been done, anybody know how it runs?

 

[blsnelling]

I take it, your thinking 288 piston in a BB7900? I heard its been done, anybody know how it runs?

That's something I'd like to try, but have not seen one.