Falling pics 11/25/09

[twochains]

#### you laughing at? Randy..

That would be me...

 

[bustedup]

That would be me...

Stop being hard on ya self .......your doing fine bro

 

[Metals406]

You boys are making it hard to keep up with this thread. . . Carry on. opcorn:

 

[jrcat]

You boys are making it hard to keep up with this thread. . . Carry on. opcorn:

It took me 20 minutes to catch up ()

 

[HuskStihl]

That's pretty good, your getting a better side cover, bigger oil pump, handlebars, stiffer av? And a longer bar for cheaper. Better get it before someone realises haha.
I still think with just an opening of the muffler and a tune that 460 will wake up..

The advantage of the 660, you'll never need to buy a bigger saw. The drawbacks, big money, and you won't like it in between the trees. This is gonna kick the CAD right out of remission

 

[bustedup]

The advantage of the 660, you'll never need to buy a bigger saw. The drawbacks, big money, and you won't like it in between the trees. This is gonna kick the CAD right out of remission

In between trees? ya mean weight/bar length?

 

[jrcat]

In between trees? ya mean weight/bar length?

Pffft you cant decipher texas talk ...... its only spoken by texans....with no cattle .......opcorn:

 

[RVALUE]

Pffft you cant decipher texas talk ...... its only spoken by texans....with no cattle .......opcorn:

.....and a big ol' belt buckle and a little bitty ....

 

[bitzer]

Holy ####! Theres a lot of chatter in here these days....

Clint- You are still running that saw like you've got a short bar on it or at least in that video. I tried to steer you to the 28" full skip! There was a reason with that cc range in hardwood. I wouldn't go longer than that. Anyway, if you can part with your 460 for about 2 weeks I'll go through it for you. How much time is on it and what is it pulling for compression? I'm no race saw builder, but I can woods port it well enough that it'll bag at least another thousand per day for you. I don't do pop-ups or polish ports. Just open er up were it should be.

 

[HuskStihl]

Holy ####! Theres a lot of chatter in here these days....

Clint- You are still running that saw like you've got a short bar on it or at least in that video. I tried to steer you to the 28" full skip! There was a reason with that cc range in hardwood. I wouldn't go longer than that. Anyway, if you can part with your 460 for about 2 weeks I'll go through it for you. How much time is on it and what is it pulling for compression? I'm no race saw builder, but I can woods port it well enough that it'll bag at least another thousand per day for you. I don't do pop-ups or polish ports. Just open er up were it should be.

Seriously take him up on this. I'll mail you my 385xp with a 28" and some chains if you need a saw while yours is being bitzerized

 

[HuskStihl]

In between trees? ya mean weight/bar length?

Pffft you cant decipher texas talk ...... its only spoken by texans....with no cattle .......opcorn:

Should be self explanatory for anybody who's held one! (if it's not, I meant 'cause it is big and heavy):msp_biggrin:

.....and a big ol' belt buckle and a little bitty ....

Hey, it's a medical condition, and it's serious and embarassing. That hurt my feelings

 

[jrcat]

This was the first on my list this morning a red oak , 3 of them growing from an old stump. Im guessing it was an old growth stump all 3 were near the same age. I counted 85 rings plus or minus. I had to leave the stumps high to have enough room to get in with the saw. The last 2 pics are of one of the stumps. Faced it , bored out the center hence the small hinge, but it keeps the pull outs to a minimum and helps keep them from splitting to I think.

 

[jrcat]

And yes its a short bar. The nose on my 24" bound up so I keep a spare under the seat of my dozer. I threw it on so I could finish up a hitch to get back to the landing.

 

[treeslayer2003]

This was the first on my list this morning a red oak , 3 of them growing from an old stump. Im guessing it was an old growth stump all 3 were near the same age. I counted 85 rings plus or minus. I had to leave the stumps high to have enough room to get in with the saw. The last 2 pics are of one of the stumps. Faced it , bored out the center hence the small hinge, but it keeps the pull outs to a minimum and helps keep them from splitting to I think.

pretty work!

 

[treeslayer2003]

Holy ####! Theres a lot of chatter in here these days....

Clint- You are still running that saw like you've got a short bar on it or at least in that video. I tried to steer you to the 28" full skip! There was a reason with that cc range in hardwood. I wouldn't go longer than that. Anyway, if you can part with your 460 for about 2 weeks I'll go through it for you. How much time is on it and what is it pulling for compression? I'm no race saw builder, but I can woods port it well enough that it'll bag at least another thousand per day for you. I don't do pop-ups or polish ports. Just open er up were it should be.

+1 28 and full skip is what I run.

 

[jrcat]

pretty work!

Thank you sir. I try my best.

 

[jrcat]

Those reds are clean and straight as an arrow so Im hoping they go for veneer.

 

[treeslayer2003]

Those reds are clean and straight as an arrow so Im hoping they go for veneer.

they should be some kind of grade. look about like what i'm cutting now.

 

[bustedup]

This was the first on my list this morning a red oak , 3 of them growing from an old stump. Im guessing it was an old growth stump all 3 were near the same age. I counted 85 rings plus or minus. I had to leave the stumps high to have enough room to get in with the saw. The last 2 pics are of one of the stumps. Faced it , bored out the center hence the small hinge, but it keeps the pull outs to a minimum and helps keep them from splitting to I think.

cool bro


Did ya put in a cut in front off the hinge?

 

[jrcat]

cool bro


Did ya put in a cut in front off the hinge?

I guess Im not understanding what you mean.