You live in Mocksville, NC? I live close to Lenoir. A little over an hour from Mocksville.
FarmerTec Huztl MS660 Updated Build Kit - Build Thread
Help Support Arborist Forum:
I know it. Summers in hickory/granite falls.
chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy
There was a small radio station in Lenoir I think that had a program called "swap shop" an early Craigslist. I will never forget that. From cows to plows, even canning, lol
I remember it. I think the radio station is still there. There are a couple in Lenoir actually.
Sent from my Moto G (4) using Tapatalk
Sent from my Moto G (4) using Tapatalk
Good times
chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy
Canyon Angler
Addicted to ArboristSite
I had to do some serious bending with Channellocks to get my FarmerTec wrap-around bar (got off ebay) to fit my 660...and even then it was a little kludgey...
Fortunately, the saw came with a regular bar, so the holes were already there...
They way the ship it effects that. I needed 3 hands. On the handle it's best to make your threads first and then place the handle.
chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy
golddredgergold
ArboristSite Operative
Good news. My wrap around bar fit perfect. No bending or tweaking. Just went right on. Pretty stoked
Took 5 minutes litterly to do. Will take a picture when I get home.
Took 5 minutes litterly to do. Will take a picture when I get home.
golddredgergold
ArboristSite Operative
Pictures
man thats a beautiful saw. mg is drooling, where are you man? he is flashing you some saw p0-rn!
you are missing the squench holder. its a black knot of rubber that slips over the bar and you stick your bar wrench down it. the highlighted area has your part number and name if you want one. bling! works great
you are missing the squench holder. its a black knot of rubber that slips over the bar and you stick your bar wrench down it. the highlighted area has your part number and name if you want one. bling! works great
golddredgergold
ArboristSite Operative
I will check into that wrench holder for sure.
And thanks for the compliments on the saw. I am pretty proud of it. Came out sharp. More time than there should be in it but gonna last awhile I think.
And thanks for the compliments on the saw. I am pretty proud of it. Came out sharp. More time than there should be in it but gonna last awhile I think.
Canyon Angler
Addicted to ArboristSite
Also missing the gas tank protection plate:
https://www.ebay.com/itm/GAS-HANDLE...FOR-STIHL-CHAINSAW-064-066-MS660/361895487909
MG porting
ArboristSite Guru
Good catch.
chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy
i wanted to order something from thatgerman supplier. I wrote and asked if the part was made by farmertec. they avoided the question which is hard to do in writing. so i wrote them back and asked them to simply look at their invoice and let me know what the resukt was. Below is the email. That is really sad. dishonest retail.
I think I broke it 
chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy
chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy
Canyon Angler
Addicted to ArboristSite
That's how mine was when I first got it. Turned out it had the muffler gasket delete. Put in a gasket (and a big exhaust pipe) and no more drool!
I just tuned it. It slobbers during. I wondered if someone would catch it.
With this cylinder with the walbro, I had to abort the tune 3 times and reset. I kept running out of needle on the high side. The final was starting at 1.25 out on L and 1.5 on H and that left me enough needle to tune to 12500
chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy
That don't look like slobber, that looks like diarrhea.
Canyon Angler
Addicted to ArboristSite
Mine was a little over 11,000 when it arrived. After 10-15 tanks, I opened up the muffler to about 74% of ex. port area, then tuned it to about 12-12.5k with 1.2 turns out on both jets, FWIW. Took it to my saw guy and he said it sounded perfect to him. Saw seems stronger and stronger. )))
Mine has Meteor P+C and a number of other upgrades (Oregon clutch, Taiwan crank, Olean bearings) and OEM (not sure what the exact breakdown is) but it seems like the guy who did it really knew what he was doing.
)))Mine has Meteor P+C and a number of other upgrades (Oregon clutch, Taiwan crank, Olean bearings) and OEM (not sure what the exact breakdown is) but it seems like the guy who did it really knew what he was doing.
I have had them look worse. I am happy with it.
chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy
