file to Square file 3/8" Low Profile (picco) chain?

[777funk]

I'm curious what file would work best to accomplish this?

 

[RedneckChainsawRepair]

6 sided bevel is what I used on the full chisel 3/8LP also 4 sided worked great as thinner.

 

[777funk]

6 sided bevel is what I used on the full chisel 3/8LP also 4 sided worked great as thinner.

Nice. I had a 6 sided file like the second picture and tried it with regular 3/8 chain, but what I didn't have is enough practice. I like the look of the almost triangle file (still 6 sided). I wonder if it would fit better with the small teeth.

 

[Herbert Schwarz]

For 3/8" pico and .325 I prefer the Vallorbe file Goofy chisel file.

 

[RedneckChainsawRepair]

Back in 2015 or 2016 we had a chain build off using full chisel 3/8LP. Ran it on a stock echo 3900 39cc one day and then ran it on a Dan Henry ported 026 the next day.

Did work and race class clains. W = work

Cants were 8x8 pine. 3 cuts made slowest of 3 tossed out for time average.

One of my square on the ported 026. I did not win but did ok.

 

[RedneckChainsawRepair]

Round work

 

[Squareground3691]

Vallorbe triangle chisel bit file , does a decent job,