Fliplines - Coated or uncoated

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Can-Do-It

ArboristSite Member
Joined
Jul 7, 2004
Messages
88
Reaction score
0
Location
Columbia SC
I know this question has been asked before but before I ordered one from Sherrill I wanted updated information from you'all.

As I mentioned before on the forum, I do a lot of take downs and trimming of mainly pines, and lately there getting larger and larger in diameter. The Ice storms from last winter are causing people to take a second look. So which type of flipline line and microcender are you using and why.


Thanks and have a Blessed Day,
 
im using a yale wirecore flipline with a v.t adjuster, works better than the mechanical devices in my opinion
only thing i dont like about the yale flipline is it doesnt have a swivel snap hook, that will be my next flipline
 
If you're getting a wire-core be sure to get the swivel snap. Otherwise the snap might twist the swaged end and make it more likely to break the cable.

I don't have a problem moving my FL up trees that diameter. But that's personal choice...
 
How about a tight-wound (or was that hard-lay) three-strand?
 
New England 1/2"-12' wire core w/ microcender. Had it since 03/2004 and never a problem. I like to run up pines that are usually between 16" and 32" in diameter. I always have a spare made out of 16 strand and a prusik to get past big limbs :cool:
 
Can-Do-It

I hear they got some new fliplines coming out that have 20% viagra! :Eye:
 
Hey, this ain't the joke thread.
aaf_shifty.gif
 
Sherrill offers a couple types of fliplines with the Petzl macrocender and swivel. I was thinking about the 10' coated-wire and use a calibener on the macrocender side. The other I believe is Dacron with a Gibbs ascender. I want it to be stiff so it's flipable. :cool:
 
I used to like the tight-wound 3-strand lanyard with two snaps as Glen describes, until I read a post by Tom (Dunlap) awhile back about using rope at hand with a friction hitch tied to the saddle's D-ring. I don't know how "pitchy" Southern Yellow Pines are, but I know White Pines up here will ruin an expensive lanyard in a big hurry. And I LOVE the performance and flexibility this setup offers. I like it extra long, so when I limb walk (on decurrent trees, not pines), I have the length to loop around a higher parallel branch for stability. Under normal climbing situations, I just daisy-chain the end when I don't need the length so it doesn't get in the way.

In the pic the 1/2 inch lanyard rope is hitched to the D-ring using a distel hitch with Sta-Set, 5/16in (8mm) rope. Thanks, Tom!
 
Chucky,

I can't claim to be the inventor only a promoter. Mark Chisholm showed me the setup and it made so much sense.

It seems to me that if I were climbing in a lot of pitchy trees this setup would make the most sense. When the rope got too nasty it could be tossed. I can think of lots of other things to spend that money on besides store bought fliplines.

Tom
 
you can use a flipline on its own, with a few turns thru the 'd'.graeme mc climbs this way
 
MasterBlaster

If memory services me right, the person in the pictures flipline was cable, wrapped with manila rope. His name escapes me but he down loaded a whole photo album with the story behind each. It was about 2 years ago. Great photo's and greater story on logging.
 
Back
Top