UPDATED LIST:
1) Vintage McCulloch Sharpening jig and a Homelite410filingvise from
@Mastermind
2) Mastermind ported Husqvarna 346 XP OE from
@troylee
3) Winner gets a set of their crankcases powdered by Glock37from
@glock37
4) Makita XPH12 18V LXT Brushless hammer drill. Will include one 4.0 Ah Battery and charger. from
@166
5) Port Job from
@huskihl
6) New 20" Husqvarna Large Mount Bar and Square Ground chain from
@dustinwilt68
7) Poulan PRO 330 from @Sleeper
8) BRAND NEW Stihl 25" 84DL LIGHT bar from
@GCJenks204
9) Six Pack of 2.5 Gallon Red Armor Mix oil with shipping to the winner from
@Dub11
10) Vintage John Deere saw from
@Deets066
11) Custom Tuned Pipe from
@spencerpaving.
12) Woods Port from
@tree monkey
13) Brand new Husqvarna 372 Full Wrap handle from @TreeLife AND a set of new oem west coast spikes from
@Czed
14) N.O.S. Husqvarna 262 XP top end from
@lwhaples
15) Mastermind ported Dolmar PS-6100 from
@Adirondackstihl
16) Chainsaw Repair Tool Set from
@Definitive Dave
17) JMS Ported 064/066 from
@miller Mod Saws and
@hseII
18) Timberline Sharpener from @ny15
19) A case of 12 quarts of AMSOIL Saber synthetic mix from
@Wood Chopper
20) A VERY NICE Stihl 028 Super from
@SOS Ridgerider
21) Brand New Performance Tools T-Handle sets in SAE, Metric, and Torx from
@USMC615
22) 1 pair of work gloves, 1 pair of Oregon Braces, 1 chainsaw filing set, and 1 single person first aid kit from @ajschainsaws
23) Winner's choice of a CCC Racing 346xp NE 44.3mm pop-up performance OR race flat top piston made for us by Wiseco. Both have a 1mm chrome faced Japanese steel ring centered on the intake with patented go-fast technology and patent pending never-lose additives
This offer not open to anyone who shouts "Team Stihl" at a wedding or baptism. from
@Definitive Dave
24) MINTY Husqvarna 257 from
@Stump Shot
25) NEW Sugi Hara Lightweight 32" 3/8 .063 Gauge in 3003 Stihl mount (D025) from
@Roadfxr
26) NEW 20" Total Super Bar (TsuMura) 3/8 .050 Gauge in D009 mount from @Dolmar Junkie
27) Box of 044/440 parts, includes 12mm Stihl cylinder, It has a scratch that can be felt, but the saw ran great and had good power, aftermarket piston, oem piston wrist pin, oem bearing (I think) c clips, AV bushings,some rubber pieces, nice after market 440 tank, oem bearing spacer, oem handle, goodrunning Hong Kong Zama carb, muffler base, oem badges, oem brake flag, ans a set of Glock37 powder coated spikes with hardware and chain catcher from
@Backtroller
28) Gamn carbide sharpener with two burrs and literaturefrom
@Tpagel
29) A dozen BEAUTIFUL hand tied Trout Flies from
@Adirondackstihl
30) Makita 47 Pc. Ratchet and Bit Set from
@166
31) Hand forged set of draw knives, one curved and one straight, made by none other than the legendary Scotty Overkill himself! from
@Scotty Overkill
32) Crank tool kit from
@Mattyo
33) Kit saw of the winners choice from Hl Supply from
@Gentleman
34) A case (24) of Tanaka Perfect Mix 6.4oz bottles from @PissRev
35) A brand new 18" .325 .063 74DL Bar and Chain setups in Stihl mount. Bar is the same as an Oregon Prolite (1 of 2) from
@166
36) A brand new 18" .325 .063 74DL Bar and Chain setups in Stihl mount. Bar is the same as an Oregon Prolite (2 of 2) from
@166
37) A Regulator (great for finding leaks) from
@psuiewalsh
38) A made in USA Oregon 28" D009 mount in 3/8 .050 includes a used Stihl chain that has been converted to square ground from
@psuiewalsh
39) A SWEET vintage Husqvarna labeled Windsor bar 16" 3/8 .058 60 DL from
@Stump Shot
40) A BEAUTIFUL Homelite410 custom Engine Turned 3/8 .050 Gauge 84 DL Stihl bar from
@Time's Standing Stihl
41) Oregon 5/32 sharpening kit, includes round file with guide, flat file, handles, raker gauge, bar grove cleaner, and measuring gauge (1 of 2) from
@166
42) Oregon 3/16 sharpening kit includes round file with guide, flat file, handles, raker gauge, bar grove cleaner, and measuring gauge (2 of 2) from
@166
43) 5 loops of Carlton A2EP-072E chain 3/8" .058 Semi Chisel from
@166
44) Homelite410 filing vise from
@Homelite410
45) Brand New OEM Husqvarna 576 Full Wrap Handle Kit from
@Moparmyway
46) New in box 12" Stihl 3/8p .050 bar and 5x 12" 63pm chains, non safety (great combo for a MS 200 T) from
@treesmith
47) New in box OEM Husqvarna 346xp ne piston and cylinder kit from
@treesmith
48) Husqvarna chainsaw bag from @ajschainsaws
49) N.O.S. Husqvarna 262 XP three shoe clutch assembly from
@ncfarmboy
50) FULLY rebuilt and ported Husqvarna 394 XP from
@Moparmyway
51) Dolmar/Makita 030-132-000 49mm fits 6800I from
@ncfarmboy
52) Jonsered 503-1687-01 fits 590 haven't measured but they look the same just diff suffix 01 vs 71 from
@ncfarmboy
53) Husqvarna 503-1687-71 fits 55 CP from
@ncfarmboy
54) Orange Gen III Two Idiots Logging XL T Shirt from
@166
55) Black Gen III Two Idiots Logging XL T Shirt from
@166
56) Freshened up and woods ported 034/036 hybrid with upgraded clutch drum and bearing as well as a metal mesh filter from
@Canadian farm boy
57) Excellent running Sachs Dolmar 166. 118cc muscle saw, has a perfect piston & cylinder, West coast filter and full wrap handle. Top cover has been repainted. PHO, Winner must supply his own bar and chain from Uncle Lee
@lee H
58) A pair of Sip Security pants, size is 38-35" waist with 32" length from
@CapitaineHaddoc
59) A nice little wood splitter axe/wall hanger with a vintage craftsman head and hickory 28” handle. My father makes them as a hobby and we wanted to donate it
from
@huskyboy
60) Walbro HDA 87 for a Husqvarna 262 XP from
@CJ Brown
61) Brand new Oregon 18" K041 bar and two chains from
@Dahmer
62) N.O.S. Husqvarna 257 Cylinder kit from
@ncfarmboy
63) New Husqvarna small mount bar K095 24” 3/8 .058 84 DL replaceable sprocket nose. Has a scratch here and there from storage but never used from
@Greg Newman
64) Winner gets a set of their crankcases powdered by Glock37from
@PA Dan
65) New 28" .050 Gauge 91 DL Stihl Rollomatic ES bar in 3003mount (D025) from
@Jacob J.
