get together this weekend

[Gypo Logger]

Same saw running Ed's 404.
John

 

[ehp]

The 3120 video is the 2nd run on the saw and it was alittle warm because they were almost back to back so it slowed down just over a .1 from the first run and yes a 13 tooth would of helped alot there.
as you can hear the bike motor is pulling when it had the 1/2 inch on it but the .404 is faster and the rackers could be lowered some more, but that same chain in smaller wood like 12 inch to 14 inch worked great.
Any one know of a deep belly .404 bar .063 gauge , the one on the saw isnot much of a bar so i am looking for a new bar to but on it , it needs to be deep cause of the 18 tooth gear, if anyone has one or knows where i can get one besides Cannon let me know ok

 

[066 stihl]

Ed, the rotax looks like it could be a hand full to run.

 

[ehp]

I only ran one once at a show ,Eagle River a couple years ago and I didnot run it that well but got 3rd with it.
That saw has had the front handle moved closer to gether and some other stuff to make it easier to run

 

[NB Logger]

Ed, Sorry I couldn't make it this weekend. Was that Gypo runnin' the Rotax and 3120? Fine lookin' fellow, smooth operator too. That's what I call Loggin'


NB Logger

 

[ehp]

I thought you were not going to let the young lad post anymore, and i donot know but Gypo seems to me anyhow to have gained alot of weight in between video's , one minute he is running a 385 and looks to weight 165 or so pounds next video he is running a rotax and weighs 260 pounds , I know i put him on the scale and it said 257.5 pounds and get off fast your killing me .
Now on the good looks , yep the video of the 385 Gypo does look good so Susie says but we all know I am really the good looking one out of this bunch and if i had more hair look out it would not be safe for me to go out side, i would just be over run by women .


Do not step in that Almer that is horse sh!t

 

[ehp]

I guess i can say that you made it home by your post , so did the Matric get any better gas mg, on your way home or are you still getting the same as the Western Star

 

[Gypo Logger]

Hi NB Logger, we did a little cutting this weekend and Ed set up your swingarm. Jarod made a special trip to bring it up along with a few saws as well, so your 7900 is in there somewhere.
John

 

[Hunter]

John,
Just got in. Had a good day until I got home.
Was at Emergency room for a while.
Cut The end of my thumb.

Working on the video of the weekend.
Will get some stuff ready for viewing.
Great run on that smokin KD!
Hunter

 

[sedanman]

Who got hurt? Are they OK now?

 

[Hunter]

Sedanman,
Yep All Is Ok.
I got home and had a mishap here.
Hunter

 

[Hunter]

Smooth 7900

Here is EHP showing how to operate the EHP7900.
WOW!.
Hunter

 

[Hunter]

Oh yeah,
The wood was Bass Wood.
Hunter

 

[Hunter]

John,
Here is what happens when you lower the log stand to low. I had to make due with what you had.
Great little talegate party.

Here I am running one of the many stock 7900's on with the secret weapon(Lambert Logging Chain).

Hunter

 

[Gypo Logger]

Hi Jarod, after you adopted the EHP stance, you look like you're slicing and dicing a French loaf. LOL
John

 

[Gypo Logger]

Jarod, here's the cut I made with your Hunterized 346 with an Art Martin Chain. Should get faster as the saw breaks in.
John

 

[ehp]

gypo i think you mean a 340 not a 346, we may need together soon i want a video of this 357 and 460 before i send them out.
I will get at your 7900 as fast as i can ok , should be done by next week

 

[Marky Mark]

Just had to bring this one back.
Here's the saw that changed this site and this post started a revolution.

 

[Hunter]

Marky,
Thanks for brining it back. SOme good video on this thread.
Hunter

 

[066 stihl]

Ed's, saws are fast.

Ricky