husky kicks

[Cut4fun]

I'm Back

2000ssm6 = 2000 Simply Stupid Mutt 6

Hey Manual if you read this Closet husky (2000) lovers old post he really wants a 395xp bad. :hmm3grin2orange:
He talks in circles so bad husky stihl husky stihl it is :hmm3grin2orange: . Likes to redneck race with chainsaws and watch race saws on TV, so i guess 2000 cant be all bad. Even admitted in one thread that a 385 with a dull chain would out cut his 044.
Brand dont matter to me 2000, I like Stihl, Husky, Older Poulans, Partners, Dolmars, Echo, Old mag cased anything (almost). So you are really barking up the wrong tree, i was just trying to show you the 5ci class is lacking a tad for your saw and that better choices were out there 7900. Oh just to let you know I ran a Walkers460 that kicks azz and it would out cut a modded 660 that came from out west. So choose your modders wisely.
I think if the cheerleading committee reads his closet husky affection, that he could get disciplinary action from the head cheerleader . :biggrinbounce2:

Who cares as longs as they run and cut when needed.

Now 2000 I know you are going to miss the fun, but it time for vacation again this summer, so take care and keep your skirt clean :newbie: .
Rim or Sprocket you ask 2000? Bawhahahaha.........

 

[romeo]

I still think husqvarnas KICK:rockn:

If they didn't, the Stihl guys wouldn't get so


The biggest difference that I have found between them in general is that one is only half orange while the other is all orange.

 

[GASoline71]

Yup... Husqvarna makes a damn good sewing machine...

Gary

 

[2000ssm6]

2000ssm6 = 2000 Simply Stupid Mutt 6

Hey Manual if you read this Closet husky (2000) lovers old post he really wants a 395xp bad. :hmm3grin2orange:
He talks in circles so bad husky stihl husky stihl it is :hmm3grin2orange: . Likes to redneck race with chainsaws and watch race saws on TV, so i guess 2000 cant be all bad. Even admitted in one thread that a 385 with a dull chain would out cut his 044.
Brand dont matter to me 2000, I like Stihl, Husky, Older Poulans, Partners, Dolmars, Echo, Old mag cased anything (almost). So you are really barking up the wrong tree, i was just trying to show you the 5ci class is lacking a tad for your saw and that better choices were out there 7900. Oh just to let you know I ran a Walkers460 that kicks azz and it would out cut a modded 660 that came from out west. So choose your modders wisely.
I think if the cheerleading committee reads his closet husky affection, that he could get disciplinary action from the head cheerleader . :biggrinbounce2:

Who cares as longs as they run and cut when needed.

Now 2000 I know you are going to miss the fun, but it time for vacation again this summer, so take care and keep your skirt clean :newbie: .
Rim or Sprocket you ask 2000? Bawhahahaha.........

damn we are busy today,get back with ya friend.......

 

[joatmon]

Gary's comin' around

Yup... Husqvarna makes a damn good sewing machine...

Gary

Gary,

Yep, they can do about anything. Cutting apart: they make great saws. Putting together: they make one fine sewing machine.

Husky, stihl THE ONE.

Jack

 

[romeo]

Gary,

Yep, they can do about anything. Cutting apart: they make great saws. Putting together: they make one fine sewing machine.

Husky, stihl THE ONE.

Jack

Don't forget about blowing things up, they used to make some great shotguns.

 

[SawTroll]

Yup... Husqvarna makes a damn good sewing machine...

Gary

.. and guns, and chainsaws........:greenchainsaw:

 

[Tzed250]

.. and guns, and chainsaws........:greenchainsaw:

...and motorcycles...

 

[rahtreelimbs]

Yup... Husqvarna makes a damn good sewing machine...

Gary

.. and guns, and chainsaws........:greenchainsaw:

...and motorcycles...

While on the subject of Husky motorcycles...............anyone remember the Husky Automatic dirtbike from the late '70's early '80's???

 

[Tzed250]

While on the subject of Husky motorcycles...............anyone remember the Husky Automatic dirtbike from the late '70's early '80's???

Very popular for enduro...Saw them raced at the Blackwater 100...

 

[rahtreelimbs]

While on the subject of Husky motorcycles...............anyone remember the Husky Automatic dirtbike from the late '70's early '80's???

Very popular for enduro...Saw them raced at the Blackwater 100...

Isn't the Blackwater 100 now a defunked race???

 

[Tzed250]

Isn't the Blackwater 100 now a defunked race???

For quite some time now...I feel lucky to have seen it a few times. A true test of man and machine. I would say Husky won it more times than not.

 

[rahtreelimbs]

Isn't the Blackwater 100 now a defunked race???

For quite some time now...I feel lucky to have seen it a few times. A true test of man and machine. I would say Husky won it more times than not.

Mud boggs............a local guy won that race one or more times...........Eddie Lojak was his name...........he also did an ISDE race too!!!

 

[Tzed250]

Yes...the Lojaks are legends in Grand National Cross Country (GNCC) racing. The Blackwater 100 was the first GNCC and was the brainchild of Morgantown, WV native Dave Coombs. For years the motorcycle industy called the Blackwater "Americas Toughest Race"...

 

[2000ssm6]

I was going to leave you alone......

2000ssm6 = 2000 Simply Stupid Mutt 6

Hey Manual if you read this Closet husky (2000) lovers old post he really wants a 395xp bad. :hmm3grin2orange:
He talks in circles so bad husky stihl husky stihl it is :hmm3grin2orange: . Likes to redneck race with chainsaws and watch race saws on TV, so i guess 2000 cant be all bad. Even admitted in one thread that a 385 with a dull chain would out cut his 044.
Brand dont matter to me 2000, I like Stihl, Husky, Older Poulans, Partners, Dolmars, Echo, Old mag cased anything (almost). So you are really barking up the wrong tree, i was just trying to show you the 5ci class is lacking a tad for your saw and that better choices were out there 7900. Oh just to let you know I ran a Walkers460 that kicks azz and it would out cut a modded 660 that came from out west. So choose your modders wisely.
I think if the cheerleading committee reads his closet husky affection, that he could get disciplinary action from the head cheerleader . :biggrinbounce2:

Who cares as longs as they run and cut when needed.

Now 2000 I know you are going to miss the fun, but it time for vacation again this summer, so take care and keep your skirt clean :newbie: .
Rim or Sprocket you ask 2000? Bawhahahaha.........

The pot was not hot enough eh?? Now you will burn instead of boil

OK, I'm a closet Husky lover?? Maybe you didn't understand the 385 post..Since you were not there(there were some homos around, were you?) I'll tell the story:
A guy down the road, who is a Husky man was out cutting one day. Mind you this guy can have any husky he wants, all he has to do is ask. I stop and see a 'ole 385XP. I said shat, I'll be right back. Went to da house to get the trusty "stock" 044. I get back and ask to use the 385 because I have been asking TimberHauler when he is going to sell me his. Just thought I had to have one Put the 385 in the wood and said wtf. He is over using the 044 on the other end and blasts past me. My eyes have now gleemed upon his dull chain, muhahahaha. Pull out the hand file and go to town on dat turd. Now that is what I'm taking about when it ate some wood. Good saw but not my 044. He then had a new respect for Stihl.

So there is the closet Husky story, Huskys are just not for me, not impressed by the 3rd biggest saw so you can have them. Not to say I will not buy one some day, I can get a new one very cheap. Brand don't matter to me neither, I'll take anything that runs good 5ci Stihl class is not lacking nothing for me, still puts side money in my pocket.

Redneck racing??? That is what we call a gtg here, what do you call it? Cut4come's day to tell lies?? Have you been on TV yet? I was just thinking a pro like yourself should be on TV...


I'll agree on the builder deal, hope to find out some day. Wanna mod my stock 440 for me???

Where is your head cheerleader?? Are those the ones telling me to quit busting you chops?? My PM box is blowing up, how many friends do you have?, not many I see.

I'll take a rim on a 50cc and up saw, will keep the spur for the 346. Wanna get up with me later? I just bought a whole mess of wild thangs so I can spend countless hours modding them. What happens when you polish a turd?

Now looking back I have answered all of your questions BUT you have missed one of mine....care to take a dare???

 

[Cut4fun]

2000ssm6 = 2000 Simply Stupid Mutt 6
Yes it is amazing how the pm boxes has to be emptied because of all the people laughing at you. 3 times in 2 days already. By the way Thanks for all the rep guys, I will give it back as I can.
It is also amazing how you still wont come out of the closet and tell the truth about wanting a 395 or 3120 for some reason or do i need to bring up more old dirt in your threads. I will stick with my 066 and 084 till I run a gas saw that is better in the cut then the 2 I have in that class.
Such a immature :looser: 2000 but is OK you will grow up someday and have a open mind. BAwhahahaha :newbie: .

 

[2000ssm6]

2000ssm6 = 2000 Simply Stupid Mutt 6
Yes it is amazing how the pm boxes has to be emptied because of all the people laughing at you. 3 times in 2 days already. By the way Thanks for all the rep guys, I will give it back as I can.
It is also amazing how you still wont come out of the closet and tell the truth about wanting a 395 or 3120 for some reason or do i need to bring up more old dirt in your threads. I will stick with my 066 and 084 till I run a gas saw that is better in the cut then the 2 I have in that class.
Such a immature :looser: 2000 but is OK you will grow up someday and have a open mind. BAwhahahaha :newbie: .

Good one on the name! Do you really know what it means(no cheating). No need for a 395 or 3120, would like to have one but no thanks. Keep the dirt coming, I love watching you waste your time. I might sell you my 440 but you must keep it stock so the good fellas at the gtgs can play fair Congrats on the 066 and 084, sweet saws I must say.

So who is the immature loser??? My mind is open every minute of everyday, what about yours?? What about those who have been told, "yeah it's stock wanna race"? Don't ever let me see you slam a guy for modding a 029, that will bite you many more times in the future.

 

[Peacock]

Do you really know what it means(no cheating).

Twenty bucks says I know EXACTLY what your name means.

 

[2000ssm6]

Twenty bucks says I know EXACTLY what your name means.

No fair!!! I'm running

 

[Cut4fun]

What about those who have been told, "yeah it's stock wanna race"? Don't ever let me see you slam a guy for modding a 029, that will bite you many more times in the future.

Please show me where I say my modded saws are stock. Anyone that goes to a gtg knows saws are woods ported DUH! or stock for sharing and testing purpose. The 029 is a plastic clam shell POS, wont hold water to the magnesium cased older poulans that I have ran. I have ran them both and know from first hand experience. Do not try and talk something down that you have not tested. The WT and 029 are pretty much in the same chapter in my book, just one cost 3 times as much 029. I have owned a plastic cases 220 and have no complaints about it and it ate a few little stihls along the way, only draw back was weight in such a small saw, I even rebuilt one from 2 junk saws for free, matter of fact it was chunking up some barn timbers today (didn't want to strain my nice running stihls with such pos wood cuttings.

Just as I figured 2000, you are just acting your age.

March 17, 1982 Age:25 NC