husky kicks

[SawTroll]

That's ok if you want to give up. Mess with the bull, you get the horns son. Sorry you have got them:biggrinbounce2:

I have been reading some of your old posts, before you were the big pro chainsaw racer. I just can't see where you have changed

btw good pics, I'll have one when I get home for ya!!!

You need to jack down a couple of stages, until you get more actual experience.......:chainsawguy:

 

[2000ssm6]

Nope no pro here, just a homeowner with a new hobby looking for a adrenaline rush before I pass on someday.

Just call me a NEWBIE or Rookie, but I am williing listen and learn from all that has info that is useful for my addiction of fast saws, unlike some.

I'll listen to what others say, some I rather just let go in one ear and out the other. I have took in a great deal of knowledge from this site and hope to get more. I have found many answers and have asked many questions. Nobody has given me any trouble, unitl now.....I can joke all day long. Don't dish it out if ya can't take it

 

[2000ssm6]

You need to jack down a couple of stages, until you get more actual experience.......:chainsawguy:

Who is that meant for?

 

[2000ssm6]

Hey Cut!!!

Cut4funk, I have a question you might be able to answer. What is a impulse line???

 

[2000ssm6]

Well look what we have here.......

Nevermind I found my answer.http://www.arboristsite.com/showthread.php?t=20519...muahahahahahaha. The bull has reappered..

 

[2000ssm6]

Who is that meant for?

Nevermind that ? also.....

Troll where do you come in here?? The gators getting bad under da bridge?

 

[THALL10326]

I don't care about either race saws, or gtg results (too many variables) - just work saws......:biggrinbounce2: :hmm3grin2orange: :hmm3grin2orange:

What are you talking about Sawtroll. Just because I drove a big nail in your end of the tree doesn't mean anything. Just cause my end is hollow its not called variables, its called CHEATING,LOLOLOLOLOL

I'm with you ole boy, racing is fun to watch but work saws do fine for me. Some hot saws are quite amazing, no question about it but for me just the pleasure of sawing on a chilly day is good enuff. I couldn't keep up with racing but its fun to watch I must admit.

 

[SawTroll]

Who is that meant for?

I think you got it, as you just pos repped me........:greenchainsaw:

 

[RiverRat2]

Chill Pill time dude!!!!

Muahhahahhaha, you mofos.:hmm3grin2orange: I even sent Ben a pm apology. I can still respect someone who is less knowledgable about saws.:biggrinbounce2:

On a serious note, I still think cut4cum is a fake.....just my dimes worth for today.

We are just playin,,,,,,,and I'll be the first to admit I don't know it all,,, that's why we are here... to learn all the time,,, :rockn: :rockn: :rockn: between the mess of us though we can pretty much figure it out,,,,

BTW C4F if for real,,,,,,,and he's got some bad Azzed saws to back it up from what I hear!!!! but he's just like us wanting to learn more!!!!!

Cause Knowledge is POWER

 

[2000ssm6]

We are just playin,,,,,,,and I'll be the first to admit I don't know it all,,, that's why we are here... to learn all the time,,, :rockn: :rockn: :rockn: between the mess of us though we can pretty much figure it out,,,,

BTW C4F if for real,,,,,,,and he's got some bad Azzed saws to back it up from what I hear!!!!

I know, the man called me out so I did the same...

 

[SawTroll]

What are you talking about Sawtroll. Just because I drove a big nail in your end of the tree doesn't mean anything. Just cause my end is hollow its not called variables, its called CHEATING,LOLOLOLOLOL

I'm with you ole boy, racing is fun to watch but work saws do fine for me. Some hot saws are quite amazing, no question about it but for me just the pleasure of sawing on a chilly day is good enuff. I couldn't keep up with racing but its fun to watch I must admit.

Ha ha my friend, you are as funny as allways - stock saw are what most of us run, and what really counts....

....it doesn't help a newbie to say that a muffler modded 359 will run with a stock 361....... :greenchainsaw:

 

[THALL10326]

Ha ha my friend, you are as funny as allways - stock saw are what most of us run, and what really counts....

....it doesn't help a newbie to say that a muffler modded 359 will run with a stock 361....... :greenchainsaw:

Well facts be known among stock saws these races are decided most times within a inch or so of equal saws. True there is a winner but out in the woods the man with the fast hands and fast feet is going to win with the most wood sawed, which is me of course,hahaha

 

[Cut4fun]

Nevermind I found my answer.http://www.arboristsite.com/showthread.php?t=20519...muahahahahahaha. The bull has reappered..

Amazing what one can learn in 2 1/2 years with a OPEN mind eh! All you have to do silly 2000 is put away the cheerleader uniform and research and have a open mind and you will be amazed at what is here to learn from and after you graduate you can move onto the next level.

Being you (2000) still have to have your CARBS adjusted for you. You might want this little bit of info to learn how to tune your own saws. Its a really good site to learn carb basics from. Good Luck.
http://web.archive.org/web/20060903154152/www.madsens1.com/sawtune.htm

 

[2000ssm6]

Icing on the cake

Amazing what one can learn in 2 1/2 years with a OPEN mind eh! All you have to do silly 2000 is put away the cheerleader uniform and research and have a open mind and you will be amazed at what is here to learn from and after you graduate you can move onto the next level.

Being you (2000) still have to have your CARBS adjusted for you. You might want this little bit of info to learn how to tune your own saws. Its a really good site to learn carb basics from. Good Luck.
http://web.archive.org/web/20060903154152/www.madsens1.com/sawtune.htm

OK cut. Hate to do this but you asked for it....

Hey bvaught if I had $600-$700 to blow, I would buy the ms440 like you got. But then again I'd get the 460 hehe. I still got less then $200 in this old 60cc saw and probably do the same homeowner cutting you do. But then again, mine is not for show and tell. I just wanted to let these great folks here know that I used their ideas on my saw and what a world of differece it made. But if you ever want a good ditch digger and you want to let me use your real saw just hollar ok, I might even add oil to the mix hehe. Have a good day.

Now, who is silly???? You sure have been digging a good ditch here. Muahahahahahaha I would rather know how to use a saw properley than NOT know how to adjust the carb....

 

[Cut4fun]

OK cut. Hate to do this but you asked for it....



Now, who is silly???? You sure have been digging a good ditch here. Muahahahahahaha I would rather know how to use a saw properley than NOT know how to adjust the carb....

Yeah my $130 dollar 3750 saw was doing what his $700 dollar 440 saw was as a homeowner . So what's the point That guy wanted to dig ditches you dummy, not me LOL at you 2000. If you cant see it was sarcastic teasing amongst me and that guy in the whole thread, then you may just need additional physic meds.
You are starting to show the whole wide web world the real loser that you are.
Get HELP 2000. and use the carb info, it will help you too.

 

[2000ssm6]

Yeah my $130 dollar 3750 saw was doing what his $700 dollar 440 saw was as a homeowner . So what's the point That guy wanted to dig ditches you dummy, not me LOL at you 2000. If you cant see it was sarcastic teasing amongst me and that guy in the whole thread, then you may just need additional physic meds.
You are starting to show the whole wide web world the real loser that you are.
Get HELP 2000. and use the carb info, it will help you too.

We all know you love those Stihls. When I think about a man of your caliber(.25 auto) it shows your true color. I think I have shown everyone that I can put you back in the dark corner you come out of, everytime. We may meet again someday but I'll be sure to have my soooo slow 440. Oh, thats right you don't have any stock saws to race with, silly me what??? it is stock??? OOOOkkkkayyyyy sure

 

[Cut4fun]

2000 You wanted to woods port a 029 BAWhahahahahah :hmm3grin2orange:
Silly boy 2000. :biggrinbounce2:

http://www.arboristsite.com/showpost.php?p=558521&postcount=1


http://www.arboristsite.com/showthread.php?p=558521#post558521

 

[Cut4fun]

2000 you are starting to look like a hypocrite. fleabay woods ported 044 eh!
Silly 2000. ROFLMAO at U! You sure looked into muffler mods and woods porting in the past. Tell the truth just once young man and it will set you free. You are twisting your stories so bad you are starting to confuse yourself on the back tracks. LOL!
http://www.arboristsite.com/showpost.php?p=579358&postcount=8

 

[2000ssm6]

Yep, won't deny it. After running the 361 I knew the 029 needed help. I no longer have the 029, sold it for $285 btw. After comparing the 440 and 029 I could live with the extra weight of the 440. Not much of a difference. When me and Ben O was talking about it he said a few words about the 029. Being the 029 was my first "real" saw(had those pos poulans you speak highly about) I thought it would be the first peice of history to go with my collection. Ben O told me that the engine design was not worth a woods port but a muffler mod would really help. At that time I could not afford a pro saw so I was open to opinions, heck I may have took some advice from a loser like youself. Anyway I saved enough money to buy the 044 and liked it so much I bought another 440. So here I am, Stihl looking for more saws....

I guess you thought that since you know so much about saws you could slam me. Well I was wrong, you can't

 

[2000ssm6]

2000 you are starting to look like a hypocrite. fleabay woods ported 044 eh!
Silly 2000. ROFLMAO at U! You sure looked into muffler mods and woods porting in the past. Tell the truth just once young man and it will set you free. You are twisting your stories so bad you are starting to confuse yourself on the back tracks. LOL!
http://www.arboristsite.com/showpost.php?p=579358&postcount=8

We can keep digging up dirt all night. Truth is we both have done stupid things(you more than me) but I will admit to it, what about you????

Back tracking is not the same as a lie.....