Husqvarna 266 trigger reassemble.

[David Mayers]

I have taken some pics of the tank showing the trigger and spring that I can't seem to get back in place , hoping that someone can help thanks David.

 

[Sprinter]

This should get you there.

https://www.arboristsite.com/thread...hrottle-latch-operator-presence-lever.290687/

 

[David Mayers]

This should get you there.

https://www.arboristsite.com/thread...hrottle-latch-operator-presence-lever.290687/

Thanks for the reply my problem as you see is also the small spring, I need to urgently get the saw assembled have a lot of logs to do regards thanks David

 

[Ronie]

I think you need to take the throttle off, it's been awhile so I might be wrong about that, install the spring with the L part at the bottom, pointed towards the rear of the tank, and slide the pin in. Now put in the operator presence lever and install the pin for it. After that, put your throttle back on. Pic is of an old tank I have lying around to show how the spring goes.

 

[David Mayers]

Thanks so much for the help, will certainly try with the spring as you suggest , I need to mention that the trigger lock wasn't working, hence my taking the complete thing apart. I thought that there might be a part that was broken off, but can't see anything obvious, so I have ordered both plastic parts and the presence spring, regards thanks David

 

[David Mayers]

I think you need to take the throttle off, it's been awhile so I might be wrong about that, install the spring with the L part at the bottom, pointed towards the rear of the tank, and slide the pin in. Now put in the operator presence lever and install the pin for it. After that, put your throttle back on. Pic is of an old tank I have lying around to show how the spring goes.

View attachment 961654

I have tried a few times, can't seem to get it to work thanks regards David

 

[Ronie]

View attachment 961825View attachment 961824
I have tried a few times, can't seem to get it to work thanks regards David i

In a minute I'll make a video of putting the Throttle lock in.

 

[Ronie]

Not the best video but I hope it helps.

 

[David Mayers]

View attachment 961825View attachment 961824
I have tried a few times, can't seem to get it to work thanks regards David

I think you need to take the throttle off, it's been awhile so I might be wrong about that, install the spring with the L part at the bottom, pointed towards the rear of the tank, and slide the pin in. Now put in the operator presence lever and install the pin for it. After that, put your throttle back on. Pic is of an old tank I have lying around to show how the spring goes.

View attachment 961654

View attachment 961825View attachment 961824
I have tried a few times, can't seem to get it to work thanks regards David

In a minute I'll make a video of putting the Throttle lock in.

Thanks so much for your fast reply, my apologies I had the spring upside down, it now fits, but no locking action, I think that it possibly is as I suspected that one of the 2 plastic parts is worn? I look forward to seeing your video regards thanks David

 

[David Mayers]

Not the best video but I hope it helps.

Thanks a lot got it ,my spring was somehow bent almost straight, the trigger lock doesn't want to hold, must be one of the plastic parts worn ,will change the presence lever and give it another try regards thanks David

 

[David Mayers]

In a minute I'll make a video of putting the Throttle lock in.

Thanks for the message and great video, so the trigger "system " now works, except the locking part doesn't work have tried a new presence lever, still not locking, have just received the new trigger, so hopefully now it will work regards thanks David